Used Technica Zsm-150 for sale (9,852)

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm Tjdjv Rlwkepfx Abtsb -Weight: 10.3 kg

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, housing washer, shaft washer -Manufacturer: INA, bearing washer for axial cylindrical roller bearings unused Todpfx Abjv Sph Netjb -Type: GS 811 30 INA 72/M11 -Outer diameter: 188 mm -Inner diameter: 150 mm -Number: 19x bearing disc available -Price: per piece -Dimensions: Ø 188 x 10 mm -Weight: 0.7 kg/piece

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Tjdpjyqxutjfx Abtjb Belt dimensions: 150 x 2170 mm Two belt speeds Table adjustable from 0–30 degrees Adjustable sanding height Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Tjdsyilgdjpfx Abteb Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Tsdpfoyb Szhsx Abtsb Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm -Wingspan: 215 mm Tsdpoycfttofx Abtsb -Dimensions: 440/170/H245 mm -Weight: 31.8 kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 150 mm Todjxrnm Topfx Abteb -Conveyor length: 770 mm -Drive shaft: Ø 30 x 150 mm Dimensions: see photos / technical drawing -Dimensions: 875/400/H300 mm -Weight: 60 kg

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Tjdpfeyg Ebxjx Abtob Machine weight approx. 8,000 kg Further data and images available on request

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), first registration: 03/2026, fuel type: electric, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * Ambient lighting, 30 colors * Armrests for front seats, on both sides * Windshield in heat-protection glass, with heating function * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, with separate control on the left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * Mobile phone interface "Comfort" with inductive charging function * Navigation system "Discover Pro" * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic Distance Control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, backup horn, and towing protection * Driver assistance system "Travel Assist" including lane keeping assist "Lane Assist" and "Emergency Assist" * Emergency brake assist "Front Assist" with pedestrian and cyclist detection * Automatically dimming interior rearview mirror * Proactive occupant protection system in conjunction with "Front Assist" * Power steering, electromechanical, speed-dependent * Rear view camera "Rear View" * Windshield wiper intermittent control with rain sensor * Lane change assist "Side Assist" * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 light alloy wheels "Solna" 8 J x 20 at the front, with 10 J x 20 at the rear, in black, polished surface * Trailer hitch, foldable, with electrical release * Deletion of trim for the infotainment display, central control elements, and steering wheel from electric white to black * Assistance package "Plus" including area view "Area View" with rear view camera "Rear View" * Swerve support and turning assistant * Driver-side exterior mirror, convex; passenger-side exterior mirror, convex * Exterior mirrors, electrically adjustable, foldable, and heated, with passenger-side mirror lowering function * Three-point automatic safety belts in the front with belt and end-fitting tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Trim for the infotainment display and central control elements in black * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150 kW; base engine: N06/N07 * Transmission for electric drive (1-speed) * IQ.LIGHT - LED matrix headlights with automatic headlight control, bad weather light, and welcome function * Climatronic air conditioning system "Air Care Climatronic" with active combination filter, stationary air conditioning, and 2-zone temperature control * Comfort seat on the left and right, in the 1st row of seats * Short wheelbase, short rear overhang * LED luggage compartment lighting Todpfewz T Epjx Abtob * Light alloy wheels "Solna" 8 J x 20 at the front, 10 J x 20 at the rear, in black, polished surface * Headlamp range adjustment, dynamic, with dynamic cornering light * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in artificial leather, with touch operation, and heated * LED rear lights with dynamic turn signal * Parking assistant "Park Assist Plus" incl. parking assistance * Radio "Ready 2 Discover" with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear view camera "Rear View" as an alternative to the area view "Area View" in the "Plus" assistance pac

Condition: good (used), Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece Tjdpfx Absv Hmncetjb -Dimensions: Ø 480 x 280 mm -Weight: 83 kg/piece

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Tsdpsw I Uvzjfx Abtob Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: good (used), Year of construction: 2002, functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2, Model: KR150 L130 Condition: Used Year: 2002 (Multiple options available) Controller Cabinet: KRC2 Tjdpew Napvefx Abtsb Included: Manipulator + KRC2 Control Cabin + All Wire Sets Not Included: Shipment, Customs and VAT is not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. Tjdpfjytrxkex Abtjb - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, operating hours: 98,108 h, clamping force: 1,500 kN, screw diameter: 50 mm, injection weight: 354 g, Engel Victory 750/150 Tech injection molding machine (146) Number: 146 Availability: in stock Year of production: 2004 Producer: Engel Injection molding machine condition: used Screw diameter [mm]: 50 Injection weight [g]: 354 Injection pressure [bar]: 1427, 2500 Closing force [kN]: 1500 Column spacing [mm]: without columns Plate size [mm]: 750 x 850 Control type: CC 200 Todpfxey Ec D No Abteb Tongue: german Installed power [kW]: 61 Working hours [h]: 98108 Weight [kg]: 9500 Dimensions [mm]: 5700 x 2000 Feed hopper: NO Core string: Yes Robot socket: Yes

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, controller model: Siemens Sinumerik 828D CNC, ATTENTION – Equipment update: Instead of a RENISHAW measuring probe, a Renishaw tool presetter is included! TECHNICAL DETAILS Travel range X-axis: 760 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mount: SK40 Tjdjzap Dwspfx Abtob Spindle speed: 10,000 rpm Feed rate: 10,000 mm/min Table size X: 900 mm Table size Y: 410 mm Max. workpiece weight: 350 kg Number of axes: 3 MACHINE DETAILS Control system: Siemens Sinumerik 828D CNC Tool changer: 24-position Drive power: 12 kW Tool cooling through the spindle: 30 bar EQUIPMENT Renishaw tool presetter Chip conveyor

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Manufacturer: RUMA Type: MZ 150-B700 Serial No.: 2150.354 Year of manufacture: 2007 Volumetric flow rates from 1 to 150 l/min Drive power: 4.0 kW (optional 5.5 kW) Rotor volume: 15.0 liters Solid matter filling volume: 10.0 liters Liquid purification with back pressure (0.7 bar) Possible applications of the centrifuge: Tjdpfxezdf Tcj Abtjb In this system, only liquids that do not pose a fire or explosion hazard may be used, and only substances in accordance with the DIN 6601 standard are permitted (DIN 6601: Resistance of materials of containers made of steel to liquids). For example:  Emulsions  Oils  Electrolytes  Grinding fluids  Media with a pH value between 5.5 and 9.5  The solids to be separated must be specifically heavier than the liquid. Operating manual available in German and English.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation. Tedszca Apjpfx Abteb

Condition: excellent (used), RS Simulators Here we offer a temperature test chamber. Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 in an empty test chamber Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Tedpfx Ajzd Sfqebtob Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1994, clamping force: 150 kN, screw diameter: 55 mm, clearance between the columns: 51 mm, displacement volume: 475 cm³, injection weight: 428 g, installation height: 660 mm, Injection molding machine – Maschine-Engel ES 700/150 Clamping force: 150 tons Screw diameter: 55 mm Stroke volume: 475 mm Shot weight: 428 g Tsdpfxszklz Ej Abtjb Tool mounting height: 250 mm – 660 mm

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Tedpfx Aboy H Akretob Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: good (used), Clamping angle, clamping aid Tjdpfxjy Iwp Eo Abtob -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Tjdpfxezbhdlo Abtob -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Tjdezbhh Ropfx Abteb Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools.

Condition: excellent (used), Year of construction: 2016, Reforming Tool type WT/NFW Diameter 150 mm Weight 16.9 Kg Steel 400 N/mm2 = 6,0 mm Inox 600 N/mm2 = 6,0 mm Aluminium 250 N/mm2 = 6,0 mm Todpfx Aezcxzqobteb For finish forming and calibrating of preformed components. It consists of a tool carrier WT 80 S and forming inserts N NFW 102 The forming inserts NFW in steel quality are designed for one single radius and one single thickness of material only. Different forming inserts can be put into the same tool carrier WT 80 S. But with one set of forming inserts only one single radius in one single thickness of material can be reformed. Inserts are available different shapes

Condition: used, functionality: fully functional, Year of construction: 2014, PRESSA IDRAULICA PIEGATRICE USATA DA 150T,SAHMATO AP1520-150. Todjzh Em Aopfx Abtob