Used Tmp Voronezh Press Kb9534 for sale (12,442)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, bale length: 1,100 mm, bale width: 800 mm, bale height: 1,200 mm, bale weight: 450 kg, total width: 2,100 mm, total height: 2,150 mm, total length: 4,870 mm, overall weight: 5,000 kg, power: 11 kW (14.96 HP), DIXI SLS 60, working condition, little bit modified, added full wall for pushing the bale out, detailed information in attachment, last two pictures is from 07.2026 Dodjzi A Iyopfx Am Tekp

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm Dkodpfx Aeu Nfhdsm Tjp min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Bonding patterns: line: - square plate 640x320 mm Dkjdpfx Amjr Iyrme Tep - parallel parallel plate 640x320 mm

Condition: reconditioned (used), functionality: fully functional, overall weight: 550 kg, total length: 730 mm, total width: 770 mm, total height: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider-Rounder Fortuna Automat A 4 H Dough dividing and rounding machine TOP model bun press Very robust engineering! With rounding deactivation Head cleaning position Dividing head newly overhauled, 30-division Spare parts service With NEW stainless steel blade Dkodjy Rhg Tepfx Am Tsp Only from us: DGUV V3 tested 3 rounding plates Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (W x D x H) Refurbished and SAB-tested used machine With warranty Visit our large showroom!

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Dksdpfx Aeywadwjm Tjp Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Dsdpjzixq Djfx Am Tokp Drive motor 55 kw

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Dksdpfx Aszfwycem Tjp Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Djdpfx Aszfwx Sjm Tskp Power supply: 380V Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Dkjdpfxszfwx Eo Am Tep Power supply: 380V + compressed air.

Condition: used, Year of construction: 2021, controller model: LVD Touch-B, _____ Description: Year of manuf. : 2021 Control : LVD Touch-B Working length : 3050 mm Pressing force : 1350 kN Technical Specifications Pressing force:1350 kN Bending length:3050 mm Usable installation height:400 mm Column clearance:2600 mm Control system:Touch-B Weight:9600 kg Features Axis Stop:CNC axis stop with 2 fingers Angle Measurement System:LVD Easy-Form Laser Support Brackets:2 pieces Dsdpfszig Tgox Am Tokp Safety System:Optical laser system included Foot Switch:Yes Touchscreen:Yes

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Dedpfxsziy Dfs Am Tokp Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 Dkedozkr Tbopfx Am Tep - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Clamping force: 1000 kg Overhang: 150 mm Arbor diameter: 40 mm Table diameter: 170 mm Dkedpozi A Tpefx Am Top Installation height: 300 mm Space requirement: 420 x 380 x 1500 mm

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Dkjdpszi A I Tofx Am Top Stroke: 240 mm Overhang: 150 mm Table diameter: 180 mm 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm

Condition: excellent (used), The original German Hang Piccolo binding machine is designed for punching holes and attaching metal eyelets to paper, cardboard, and other materials used in binding. The device features a convenient foot-operated drive, allowing for quick and precise operation while keeping the operator's hands free to position the material. Dodpfx Aezgvnzjm Tekp Technical specifications: * Manufacturer: Hang * Model: Piccolo * Type: binding press / eyeleting machine * Drive: foot-operated (pedal) * Cast iron construction * Work table included * Made in Germany Applications: * Eyeleting documents, * folders and binders, * calendars, * hang tags, * labels, * promotional materials, * binding operations. Condition: Used machine, in good visual condition. Condition as shown in the photos.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Dodpfxoy Uiyvj Am Tekp The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Dkedpfjzgtz Ssx Am Tep Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 330553, Heidelberg KORD offset printing press, 1-color, machine number 330553, 46 x 64 cm, in good condition, available immediately. If you are interested, we will be happy to provide you with information about other machines in our inventory. Djdpfx Aezivg Aem Tokp You are cordially invited to inspect the machine at our facility, subject to prior appointment.

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Dodpezc Rhvofx Am Tskp Accessories: ruffler and special press ram

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ Djdow U Ekpspfx Am Tjkp With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dkodpfx Amjvuucqj Tsp Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 2018, operating hours: 2,442 h, total length: 4,100 mm, total width: 2,000 mm, total height: 2,700 mm, Colour: White Weight: 8.500 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24619 - Operating hours: 2442 - Drive system: CNC - Control system brand: Delem Dsdpfx Amjzkkp Us Tskp - Control system type: DA-66T - Power [kW]: 15.8 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 120 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4100mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2022, total length: 5,020 mm, total width: 2,150 mm, total height: 2,680 mm, Colour: White Weight: 9.100 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00030430-ERH - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 15.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5025mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 9100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkjdezkki Uopfx Am Tsp Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1989, functionality: fully functional, The machine is explicitly sold as a defective unit for spare parts. Pressing force: 50 t Bending length: 2085 mm Distance between uprights: 1690 mm Stroke: 105 mm Overhang: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight: approx. 3,450 kg Dkodpezil Ehjfx Am Tsp Space requirement: approx. 2500x1800x2200 mm

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Dkodpfxeyym A So Am Tsp