Used Townsend Stripper/Casing Separator for sale (8,040)

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB Ljdstp Thbopfx Ai Horr A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Lrsdpfx Aoq Dzi Tsi Her Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Year of construction: 2022, operating hours: 30 h, condition: new, functionality: fully functional, working width: 2,000 mm, As good as new condition Bakker Magnetics 104 Excenbtric eddy current separator for sale. Trade fair demonstration unit. The latest eccentric eddy current "104" X Ecentric was specially developed and designed for the separation of non-ferrous metals from e.g. bottom ash, electronic scrap or small metal fractions. Ljdpfor D R Svjx Ai Herr The high-speed magnetic rotor in this machine has a very high number of poles and operates at a speed of 3,600 rpm. The 104 rotor generates a field frequency of 1.56 kHz

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Ledpebbr Ipofx Ai Horr

Year of construction: 2008, condition: excellent (used), Downward conveyor / separation / cycle conveyor. Very stable design. Only 6 years in operation. With 5 cycle discs. Drive via SEW gear motor with brake. Including steel base / cladding. Lredpjlvt E Ujfx Ai Hor

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Lrjdpfx Aijn Nv Sdo Hsr

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Lsdpfoh Rfbqox Ai Herr Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: used, Year of construction: 1986, machine/vehicle number: 246, manueller Deckenherstellung - manual Casemaker Schmedt PräDeckYear 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ledpjh Axi Rsfx Ai Horr On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Comarme case taper Model: Gem52 Top and bottom case taper, side grip belts, max box width 450mm, max box height 400mm, with infeed and outfeed roller conveyor, 3ph Ljdpeghg Nkefx Ai Horr

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases Lrsdpfx Aiszhwu Ej Hjr - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: new, The split separator has a diameter of 900 mm and can be supplied with sound insulation on request. Ledpfx Aievuku No Horr Drive electric motor 0.75 kW

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Lsdpfx Ajyidvdoi Herr Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel. Lrsdpfxoxvrfns Ai Hsr

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm Lrsdpfx Aeztq Suji Hor - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Year of construction: 2012, condition: excellent (used), For sale is a case packer from pulsotronic, in very good condition, manufactured in 2012. Lrsdpfozru A Iox Ai Hjr

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Ledpfx Aszr U Uqsi Herr

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm Lredszr Ix Nepfx Ai Hjr - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 74030 € 1399.17 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 420 kg 700 mm 5 - 25 m/min 0 - 2.250 mm/min mm 350 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2000 1/min 5,5 kW 0.75 kW 1.1 kW 1.1 kW 2710 mm 2428 mm 2200 mm 3500 kg 975 mm 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * fully enclosed splash guard protection of working area grinding wheel Lrodpjwirc Nsfx Ai Hor grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH autom. dressing attachment table mounted with compensation *

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 171210 € 3235.87 € 610 mm 590 mm 600 x 300 mm 600 x 300 mm 0 - 25 m/min Lsdsy Uba Uepfx Ai Herr 0 - 4000 mm/min 0,001 mm 350 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3103 mm 3933 mm 2480 mm 5800 kg 810 mm 314 kg 420 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 3.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 200 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.5 kW, with double support, width 100 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 232970 € 1700 mm 850 mm 1600 x 600 mm 2x 800 x 600 mm 0 - 20 m/min 0 - 5000 mm/min 0,001 mm 685 mm 0 - 2000 mm/min 0.001 mm 675 mm 500 - 2200 1/min 11 kW 6165 mm 3320 mm 2850 mm 5730x3200x3350 mm brutto mm 9500 kg 900 mm 1335 kg 1850 kg 405 x 50 x 127 mm 3,1 / 3,1 kW 7.5 kW X: 0,008, Y/Z: 0,005 mm X: 0,006, Y/Z: 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Lodpfx Aewiq Eisi Horr Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudinal guides with double-V-shape with Turcite-B coating All 3 axix with precision ball screws (class C2) and AC servo motors Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 250 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 124560 € 2354.18 € 1015 mm 600 mm 1.000 x 400 mm 1.000 x 400 mm 1100 mm 5 - 25 m/min 0 - 3000 mm/min 0,001 mm 450 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 2.2 kW 1.1 kW 1.1 kW 4450 mm 2655 mm 2080 mm 4200 kg 250 kg 470 kg 355 x 50 x 127 mm 0,005 mm 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcite-B coating Lodpfxewiq Taj Ai Herr Transverse and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulically Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Listing name: SWECO PH06Y2 Pharmaceutical Separator Ljdpfx Ajxzia Hei Hjrr

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 156920 € 2965.79 € 1200 mm 850 mm Lrjdpswiryzsfx Ai Hjr 1200 x 500 mm 1200 mm 1200 500 mm 5 - 30 m/min 0 - 5000 mm/min 0,001 mm 560 mm 0 - 2000 mm/min 0.001 mm 500 - 2200 1/min 11 kW 3.7 kW 3.1 kW 2.4 kW 4600 mm 2950 mm 2745 mm 4610 x 2290 x 2500 mm 6400 kg 900 mm 930 kg 1250 kg 405 x 50 x 127 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, checkout 7) Air purge spindle Longitudinal guides with double V shape, with Turcite-B coating Transverse and vertical feed with precision ball screws (class C2) and servo motors Longitudinal feed hydraulically Linear scale on Y-axis 675mm Fully enclosed splash guard with lamp Electromagnetic chuck plate 1200 x 500 mm Coolant system with automatic paper filter and magnetic separator automatische Abziehvorrichtung am Tisch montiert, ohne Diamant, mit automatischer Kompensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for electric cabinet Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH PRICE FOB TAIWAN * The exact configuration of the dresser must be clarified before ordering

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment Lredpfx Aeztxbdsi Hjr - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. Ledpfx Ajyy Ricji Hjrr PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery