Used Weber Skinner Ase 400 for sale (19,352)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Kdedpfxoxf Up Us Aafep Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm Ksdpfx Aasdx Ryyefodp

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm Kodpjid Sgmsfx Aafjdp

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Internal Vibrator IVUR 50 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Ksdjy A Hcqopfx Aafsdp - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 950 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Vibratory Plate VPR 450 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Ksdey A E Urspfx Aafodp Price EUR 2,000 plus VAT | EXW Einbeck | Delivery upon request

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position Kedpot H Rrzefx Aafsdp - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request.

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Kdjdpfewzlqkjx Aafjp

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kjdpfx Ajx U A Iaeafodp +++++

Condition: good (used), Splash guard Diameter 400 mm KKG 6 Height 100 mm Kdedpfxjc U E Rts Aafsp Bayonet fitting

Condition: used, functionality: fully functional, mileage: 6,87,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Kdsdpfsrdd Alsx Aafop Manual transmission Tridem 4th axle is steering axle and lift axle Wheelbase 3.80m Length of loading area: 6.80m Technically in good working order and ready to drive

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Kjdpfxeif Rvao Aafodp

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Ksdpfx Aoyx H E Dsafjdp

Year of construction: 2000, condition: ready for operation (used), Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts. Kdjdegmdr Ujpfx Aafep

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws Kjdpfx Aswaxuaoafsdp • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 2007, condition: repair required (used), Trench roller Weber TRC 86, manufactured in 2007, 711 operating hours, weight 1390 kg, Lombardini diesel engine 19.5 kW, serial number 7000003. The roller runs and vibrates, but the brake on the right side is not releasing. Kdodoiffk Topfx Aafep

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm Kjdpfx Aeymfzroafjdp control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Kjdjyx Dw Depfx Aafodp Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Kdedpfx Ajywr Tdeafop Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Ksdpfx Aasyx Dwksfjdp Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, For inquiries regarding the vibrating plate, please contact Mr. Herden (by phone). WEBER CR 9 Hatz-Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available. Kdedjym I Ibspfx Aafop Sales Price: €12,590.00 net / €14,982.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series stand out with their powerful compaction performance and maximum efficiency. They are therefore the top choice for compaction work in classical road and civil engineering as well as paving construction. Balanced running characteristics, high smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 9 – The new premium class: powerful, robust, reliable: - Precise, stepless, electrohydraulic forward and reverse switching via tip control - Throttle and hydraulic switching are routed and protected within the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide handle - Machine and engine protected by protective frame and full engine enclosure - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport thanks to additional lashing points on the engine console - Enhanced operator comfort with electric start, hour meter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, landscaping, sub-base preparation for paving, setting paving stones, and compacting sand, gravel, or crushed stone - With engine protection Technical Data Engine: Hatz Diesel Max. engine output: 11.2 kW (15.3 HP) Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm We can also provide you with a financing offer upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = Further Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available Sale price: €11,590.00 net / €13,792.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks ranging from classic road and civil engineering to paving construction. Balanced operating characteristics, high running smoothness, and low hand-arm vibrations ensure high user comfort. CR 9 - The new premium class: powerful, robust, reliable in operation: - Precise, stepless electro-hydraulic switching between forward and reverse using tap control - Throttle and hydraulic switching enclosed within the guide bar for protection - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guiding handle - Protection of machine and engine through a protective frame and full engine casing - Reduced maintenance requirements thanks to the self-tensioning centrifugal clutch - Easy service access; all maintenance points are easily reachable - Safe and swift loading with the large, foldable lifting eye - Secure lashing during transport with additional eyelets on the engine console - Enhanced user comfort via electric start with operating hour counter, engine oil, and battery voltage monitoring - Areas of use: road and civil engineering, trenching, landscaping, subbase preparation for paving, compacting of paving stones and consolidation of sand, gravel, or crushed stone Technical specifications Engine: Hatz Diesel Max. engine power: 11.2 (15.3) kW/hp Weight: 736 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm We can also provide financing offers upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = Further information = Kedpfx Aajym I H Rsfodp Condition: New Engine brand: Hatz Please contact Marius Herden for more information.

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (via phone). WEBER CR 9 Hatz Diesel Vibratory Plate Compactor / Brand new unit / In stock & immediately available. Sales price: €12,990.00 net / €15,458.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction jobs—from conventional road and civil engineering to paving applications. Balanced running characteristics, high smoothness of operation, and low hand-arm vibrations ensure excellent operator comfort. CR 9 – The new top class: powerful, robust, reliable: - Precise, stepless electrohydraulic control for forward and reverse travel with tip-switch operation - Throttle and hydraulic switching protected inside the guide handle - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable handle - Protection for machine and engine via protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing as all maintenance parts are easily accessible - Safe and quick loading with large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Increased operator comfort with electric start, hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench compaction, landscaping, substructure for paving, setting paving and compacting sand, gravel, or crushed stone - With compaction control and engine protection Ksdeym I H Dopfx Aafjdp Technical Specifications Engine: Hatz Diesel Max. engine power: 11.2 (15.3) kW/PS Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm On request, we can also provide a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to errors and prior sale. = More Information = New: Yes Engine brand: Hatz Please contact Marius Herden for further details.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 8 MDM Hatz Diesel Vibratory Plate / New machine / in stock & immediately available Sales price: €10,790.00 net / €12,840.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from conventional road and civil engineering to paving applications. Balanced running characteristics, smooth operation, and low hand-arm vibrations ensure high operating comfort. CR 8 – The new top class: powerful, robust, and reliable: - Infinitely variable forward and reverse movement - Hydraulic shift for throttle cable and hydraulic switching integrated and protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Protection of machine and engine through protective frame and fully enclosed engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy service access as all maintenance elements are easily reachable - Safe and quick loading with a large, foldable lifting eye - Secure lashing for transport thanks to additional eyes on the engine console - Enhanced operator comfort with electric start and hour meter, including engine protection - Areas of use: road and civil engineering, trench construction, substructure for paving works, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Max engine power: 10.3 kW (14.1 HP) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm On request, we can also provide a financing offer. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp Kdedpfeym I Hwox Aafep - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Additional Information = New: Yes Engine brand: Hatz Contact Marius Herden for further information.

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be pleased to assist you (by phone at ...). WEBER CR 8 CCD 2.0 Hatz Diesel Vibratory Plate Compactor / Brand New / In Stock & Immediately Available Sale price: €11,190.00 net / €13,316.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks ranging from classic road and civil engineering to paving projects. Well-balanced operational characteristics, high running smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 8 – The new top class: powerful, robust, and reliable in operation: - Infinitely variable forward and reverse travel - Hydraulic switching of the throttle cable and hydraulic switch protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to height-adjustable guide bar - Machine and engine protection through a protective frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading thanks to a large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operating comfort due to electric start with operating hour meter, engine protection, and compaction control - Areas of application: road and civil engineering, trench work, sub-base for paving, and compaction of sand, gravel, or crushed stone Kdsdpfxeym I Hqs Aafop Technical Data Engine: Hatz Diesel Max. engine output: 10.3 kW (14.1 hp) Weight: 605 kg Centrifugal force: 75 kN Frequency: 67.5 Hz Working width: 70 cm Upon request, we can also offer you attractive financing options. We are an official sales and service partner of Westtech. We are an official sales and service partner of Gierking GMT. We are an official sales and service partner of OilQuick. We are an official sales and service partner of Weber MT. We are an official sales and service partner of Holp. We are an official sales and service partner of DMS. We are an official sales and service partner of Seppi M. We are an official sales and service partner of Magni telehandlers. We are an official sales and service partner of JCB construction machinery. We are an official sales and service partner of Mercedes-Benz. We are an official sales and service partner of Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Errors and prior sale excepted. = More information = New: Yes Engine make: Hatz For more information, please contact Marius Herden.

Condition: used, For inquiries regarding the vibratory plate, please contact Mr. Herden by phone. WEBER CR 7 Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Sales price: €8,690.00 net / €10,341.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks in classic road and civil engineering as well as paving construction. Smooth running characteristics, high operational smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 7 – Performance and Comfort Perfected: - Infinitely variable forward and reverse travel. - Hydraulic switching of throttle control, hydraulic switching safely routed within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection of machine and engine through protective frame and full engine enclosure - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing as all maintenance elements are easily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing for transport with additional loops on the engine console - Increased operating comfort with electric start and hour meter - Areas of application: road and civil engineering, trench construction, landscaping, sub-base for paved areas, vibrating in pavers, and compaction of sand, gravel, or crushed stone. Technical Data Engine: Hatz Diesel Max. engine output: 7.5 kW (10.3 hp) Weight: 475 kg Ksdoym I Hkjpfx Aafedp Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Financing options available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = More Information = New: Yes Engine manufacturer: Hatz Please contact Marius Herden for further information.