Used Yanigav Wood Splitter for sale (6,625)

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Hedpfx Abezh Iaxehonp Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm Hodpfezh H U Uox Abhenp - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs Hnedpfx Ajzh H T Dobhjp - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Hedpjy Irnvofx Abhjnp • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis Hnsdpfx Aezk N Hlebhsp - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: - Console machine (6 units) - Travel distances: X = 3490 mm Y = 1690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm - Drilling head TF 20 - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in X - 6 vertical spindles, spindle spacing 32 mm in Y - 2+2 horizontal spindles in X - 1+1 horizontal spindles in Y - with integrated scoring blade 120 mm - with electric milling spindle 9.2 kW with ISO-30 tool holder - with C-axis - with angular head - with 12-position tool changer - with tool change position for angular heads - with vacuum pump 80-100 m³/h - Total connected load 16 kW - Compressed air 6 bar Hnsdpfx Ajzk Nz Asbhop - Compressed air consumption 210 NL/m - Extraction nozzle 250 mm - Extraction volume 5300 m³/h - Extraction speed 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3700 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: Hsdpfszk Nvgsx Abhenp - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Hnsdpfozk Nu Nox Abhep Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling spindle: - 6 kW, water-cooled - Tool interface HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in a 32 mm grid - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Dadoing cutter: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Hnodpezk Nmfofx Abhep Dimensions: 5200 x 2843 x 1855 mm Weight: approx. 3,500 kg Availability: upon agreement Location: Röllbach

Condition: excellent (used), CATALOG NUMBER 7623 Hjdpfx Abszhu S Ijhsnp Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Hodpfxezk Npge Abhenp Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2018, Used angle head Hedpfx Aezk Nlusbhjnp for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F shank with torque support with 2 horizontal tool spindles suitable for accommodating a CLAMEX grooving cutter as well as a saw blade Technical data: max. drive speed 8000 rpm max. output speed 12,000 rpm Permissible operating temperature 85°C Head can be swiveled 360° around the drive axis Sound level 80 dB(A) Weight 3.257 kg Availability: short notice Location: Hochheim

Condition: new, operating hours: 2 h, Residual wood shredder WITHOUT hydraulic slide A proven entry-level model from SFH, offering excellent value for money, for decades. Easy to operate – low maintenance costs. General: Modern PLC control Feed hopper in standard size Control cabinet with cable (5 m) Operating manual Technical data: Motor power: 11 kW, 3x400 V, 50Hz Rotor width: 600 mm Machine opening: 600 x 360 mm Cutting knives: 28 # 30 x 30mm, hollow ground, tool steel 1.7131 (16MnCr5) Counter knives: 1 x steel S355 Screen diameter: 20 mm round hole Dust extraction connection: 200 x 200 mm Dimensions (L x W x H): approx. 1,030 x 1,180 x 1,930 mm Hnjdpohq T Udsfx Abhop Weight: approx. 930 kg 2000 operating hours / 2 years warranty Options available upon request.

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Hnodpfsgw Sxzox Abhjp Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Hsdpfx Aehkz Hmjbhonp Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hnsdpfx Abeh Eiw Iehop Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Hsdpeh Hnp Dofx Abhjnp Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design Hnedpfx Aepdqzxsbhop A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput Hnsdpfx Asutmw Hjbhep The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: good (used), Code: 0436 Brand: COMAFER Model: BRIO 580 - CE Standard Hydraulic shredder for wood waste, aluminium, plastic materials, cardboard, packaging, and other materials - CE Standard Feed opening dimensions 965 x 580 mm Knife shaft diameter and length 162 x 450 mm N° 42 reversible and resharpenable knives Shaft speed 236 Motor power 10 Hp Hole diameter 10 mm Hourly output 100/200 kg Suction inlet diameter 150 mm Hydraulic power unit 2 Hp Overall dimensions mm 1050 x 1700 x 1430 h Weight kg 900 Hnjdpfezkhl Hsx Abhop

Condition: like new (used), Manufacturer / Model: JENSEN A530 L Country of manufacture: Germany (Handmade in Germany) Year of manufacture: 2021 Mileage: 27.7 operating hours (factory condition!) Engine: KUBOTA diesel engine Type of chipper: Disc chipper (blades in perfect condition) Maximum material diameter: approx. 130 - 150 mm (depending on the wood's hardness) Hodpfxozlu Rfo Abhenp Infeed system: 2 horizontal hydraulic rollers (smooth speed adjustment) Discharge chute: Rotatable within a range of 270° with an adjustable deflector No-Stress system: Yes (automatically controls the operation of the rollers depending on the engine speed)

Condition: excellent (used), For sale is an industrial autoclave (pressure impregnation unit) manufactured by the renowned Czech company VYVOS spol. s r.o. Hnodpozlu N Uefx Abhsp This unit, with a substantial capacity of 75 m³, is designed for professional wood impregnation using the pressure-vacuum method. The machine was previously used with popular impregnation agents (the unit displays a Tanalith E marking), making it an ideal solution for sawmills, wood processing plants, and manufacturers of garden architecture. Parameters and Technical Specifications: According to the attached original nameplate and documentation, the unit has the following parameters: Manufacturer: VYVOS spol. s r.o. (Czech Republic) Year of manufacture: 2005 Working capacity / Volume: 75 m³ Basic dimensions (chamber): approx. 2.0 m x 13.2 m (the total length of the unit is over 14 m, according to the technical drawings) Maximum working pressure (overpressure): 0.8 MPa (8 bar) Maximum working temperature: 20°C (typical for cold impregnation) Factory number: 2119 Registration number (passport): 1302/2004 Key features and equipment: Robust construction: Thick-walled pressure vessel made of steel, guaranteeing safe operation under load (secured with a locking servomotor-operated hatch). Complete automation system: Control cabinet visible in the photos, with a system of switches, indicators, and an integrated pump power supply system. Included accessories: The machine is sold with the piping system, pneumatic/hydraulic valves (including DN 40, DN 80, DN 200), pressure pump, and auxiliary tank (green) visible in the photos. Documentation: I am including extensive technical documentation with the unit, as shown in the photos, including detailed engineering drawings (sections, locking details), installation diagrams, and valve specifications (including protocols for safety valves set at 0.9 MPa and 1.0 MPa). Technical condition: The unit is used and shows signs of standard industrial operation. The steel structure is in very good technical condition. The machine requires dismantling, re-commissioning, and calibration at the new destination. I encourage you to contact me to arrange an on-site inspection of the machine. I have complete documentation in paper form available for serious buyers to review.

Condition: used, Chip conveyor Hnjdpfx Abezi T E Njhop Width: 500 mm Height: 900 mm Used for wood chip transportation after screen

Condition: excellent (used), Mesh size 50x50 mm. Engine power: 19.5 kW. Inlet: 42 cm. Hedpezldmvsfx Abhenp

Condition: excellent (used), Oferuję używaną prasę hydrauliczną renomowanej marki Obolith, przeznaczoną do produkcji elementów betonowych, takich jak pustaki, bloczki, cegły itp. Dane techniczne: • Producent: Obolith Hodpfx Abswpxynjhenp • Typ: Prasa hydrauliczna / wibroprasa • Napęd: Elektryczno-hydrauliczny • Stan: Używana, sprawna • Zasilanie: 400V • Solidna, stalowa konstrukcja • Wbudowana forma (możliwość wymiany na inną) • Pulpit sterowniczy z wyłącznikiem awaryjnym • Możliwość uruchomienia na miejscu.