Used Zeno Zmth 300/250 E85 for sale (21,037)

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Podpfx Afet A Ukaj Regp Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Pgodpjvmhq Esfx Af Rjp Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: Pgsdpfx Afsvzqyfj Rjp width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: excellent (used), Staircase clamp (28366) Podjln Ulaepfx Af Rjgp Clamping height 200 - 250 mm T-slot width 12 mm Clamping screw M 10 4 pieces available Weight 8.5 kg

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneering plates: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the plates Prepared for heating the plates with water Option to install a hot water boiler Price: 6,950 EUR excl. VAT The condition after refurbishment and the machine’s readiness for delivery must be verified in advance! Pgodjyi U Rnopfx Af Rsp In stock in Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are, of course, included.

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Podpfoxv Exbox Af Regp

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Pgsdjtu Txhepfx Af Rep Type: TX3 Output: 130Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Power: 105Kw With gas or oil burner Pgjdstu Tv Ajpfx Af Rep Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Pedpswv H Awefx Af Rogp Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2024, neu 2024 Pgjdpfswirrkjx Af Rep 7314 prompt, Zwischenverkauf v Türkei 14800 € 284.16 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm 1550 mm 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Pgjdpfswirp Aex Af Rop Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu Pgodpswirqasfx Af Rjp ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm Pgjdpfxswirp Nj Af Rjp

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: NOH603/47, Stahl P300 Olympia Stahlbau bridge crane, gantry crane, crane system, crane runway, hall crane Dimensions approximately 12 x 5.6 m Load capacity / lifting capacity 250 kg 1 bridge crane with 250 kg load capacity and chain hoist – gauge 5.33 m Technical data of the system: Total crane height approx. 4.42 m Top of rail to top of rail approx. 4.42 m Bottom of rail to bottom of rail approx. 4.18 m Bottom of bridge to bottom of bridge approx. 3.87 m Hook height approx. 3.25 m Gauge approx. 5.33 m Total width approx. 5.57 m External dimensions of the steel structure (space requirement) 12 x 6 m System is delivered complete: Steel structure / crane runway, free-standing, made of 140x140 mm square tubing + IPE240 runway rails + power supply 1 bridge crane, 250 kg load capacity incl. chain hoist Base plates 30x30 cm Crane is disassembled and immediately available, transport length 12 m!!!! Item location is 75053 Gondelsheim Inspection book with EC declaration is available Pedpfx Afezdbrhe Regp Very good condition, see pictures Shipping via freight forwarder or collection by appointment only.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,800 mm, total length: 18,000 mm, Float-sink separator for separating different types of plastics using density separation. Working width: 1,800 mm Podpfszc Eklex Af Rogp Working length: 9,000 mm Overall length: 18,000 mm 2 deflector plates at 45° Trough made of stainless steel (1.4571) Chain conveyor with plastic pushers, drive 2.2 kW 2 immersion rollers made of stainless steel (1.4571) including mechanical water level control If required, a feed hopper and a lightweight material extraction system can be included.

Condition: refurbished (used), Year of construction: 2026, We thoroughly refurbish all machines that arrive in our warehouse, ensuring that our customers receive devices that are virtually like new with almost zero print count. Each machine is carefully inspected, cleaned, and restored so that it performs reliably and also looks excellent. The refurbishment process Complete disassembly: Every machine is fully taken apart down to the frame, allowing each component to be individually inspected and serviced. Deep cleaning: We clean each device in great detail, removing all dust, dirt, and residues from even the smallest parts. Consumables refurbishment: All consumables and wear parts are refurbished regardless of their condition to ensure long-term reliability. Housing replacement: Scratched, broken, or discolored casing elements are replaced with parts in excellent condition. Secure packaging: Finally, the machines are wrapped in protective film and shipped in boxes to ensure they arrive safely and without damage. Psdpsy R D Hpofx Af Rsgp By the end of the process, the machine is restored to a condition that is as close to new as possible, both in appearance and performance.

Condition: used, Year of construction: 2008, machine/vehicle number: 3545, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 2,000 mm, overall weight: 28,500 kg, Cutting dimensions: Plate length: 6250 mm Plate height: 300 mm Plate width: 2000 mm Weight: 28.5 t Engine power: 40 kW Pgsdsy Sxxijpfx Af Rjp

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports Pgedpfx Afjhv A A Do Rop - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. Pgjdpfjiz A Ezex Af Rjp DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Podpfx Aji Ab Akof Rsgp Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: good (used), Year of construction: 2000, operating hours: 1,18,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Psdoyx Daxopfx Af Rsgp Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1174x644x528 mm Weight 151 kg Podpsv A Hxgsfx Af Rjgp Total power requirement 5,5 kw

Condition: like new (used), functionality: fully functional, Year of construction: 1997, For sale is a 30 KW wood chipper, in like new condition. For more information, please call. Pgsdpfx Afev D Irdo Rsp

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Pgodpfxoxbfutj Af Rep

Condition: new, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Robust and high-quality sales trailer as a flatbed trailer for food service or merchandise. Our food service trailers from the *SELLERH* series are manufactured with an insulated sandwich panel construction. The sturdy steel frame is welded and hot-dip galvanized, ensuring high stability. A lockable steel door, *not made of plastic*, is installed in the door. The *trailer body* is made of 25mm polyester sandwich panels in white. This *car trailer* has four crank supports for lifting the *food truck*. Therefore, it is an affordable *car trailer* for the *market*, *food service*, *cocktails*, *fast food*, *non-food items*, *street food*, *merchandise*, and much more. Here is an overview of the standard equipment of our sales trailer: *Entrance door with lockable pedestrian door*, *step on the drawbar*, *sales flap on the right* with lifting aids, lockable from the inside, electrical distribution, sturdy *crank supports*, *sandwich panel construction* 25mm, white exterior, maneuvering handles, support wheel with holder, sturdy *welded frame*, and a very sturdy V-shaped drawbar, hot-dip galvanized. Podpfei E N Stjx Af Regp As accessories for our *sales vehicles*, we offer additional *flaps*, *tarpaulins*, *pocket shelves*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer locks*.