Used A3 Mono Copier for sale (1,664)

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Blsdehv U Uvjpfx Ak Hsg Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2004, operating hours: 168 h, functionality: unexamined, machine/vehicle number: MA 3004, working width: 920 mm, stack height: 80 mm, product height (max.): 80 mm, control cabinet width: 400 mm, control cabinet length: 100 mm, control cabinet height: 150 mm, motor model: Nordson 3400 V, WRAPMATIC GRM Folio ream wrapper includes logic programs, cable cabins, Siemens operating panel, frequency transformers, sensors, light shells, security lines, Nordson electrical motors, gearbox, transformers, AC source, ream counters, I/O-cards, main lines pressure monitoring switch, roller conveyors, belts, carousel, hot melt pot + hoses, pneumatic cylinders and lot of mechanical details. Capacity 14 reams per minute. The machine operated for around two weeks only as trial. Located in Alexandria, Egypt. Width : 420-1000 mm Length : 530 - 1400 mm Ream thickness (max): 80 mm Ream thickness (min): 15mm 4 position carousel unwind: Roll diameter 800/1000mm Pallet height: 1800mm incl pallet Type of gluing: Hot melt glue Power: volt 500 - 50 Hz PLC: Siemens S7 Air pressure: 6 bar Blsdpfxoxr T Ezs Ak Hog Location: Alexandria, Egypt

Condition: used, Year of construction: 2018, CIDAN FORMA metal bending machine in good condition. It is a universal solution that meets the needs of both serial and single production. Fast, easy to operate and comfortable for the operator. Simple programming system - PROLINK, touch screen control provides convenient programming. Fast tool change time allows you to minimize the preparation time. The FORMA model is equipped with a combined upper beam - two different types of tools can always be used. Straight tool or segmented tools. Multifold version (when the upper clamping, lower and bending beams have segmented tools). Backrest Forma backrests have a solid construction, driven by a servo motor, ball drive and linear rails to ensure maximum accuracy and repeatability. The machine is connected, you can see and test it live. Specification: Manufacturer: Cidan Model: Forma Year of manufacture: 2018 Working length: 3100 mm Max. bending thickness: Steel (max. sheet thickness): 3.0 mm Stainless steel (max. sheet thickness): 1.9 mm Aluminum (max. sheet thickness): 4.5 mm Upper beam opening height: 195 mm Motor power: 7.9 kW Weight: ~4.7 t Equipment and functions: Control system: Prolink with touch screen CNC controlled back rest: U-shaped 3–3000 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 125 mm Bljdpswnfkdjfx Ak Hsg Segmented bending beam tools: 30 mm Tools 2900 mm If you have any more questions, we will be happy to answer them.

Condition: used, Professional vacuum machine Multivac A300/42 is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require reliable operation, high packaging quality and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model A300/42 is equipped with a 450 mm sealing bar that ensures secure and strong sealing of various vacuum bags and packaging materials. The mobile construction allows easy movement of the unit and flexible use within the workspace. Bedey Iz Eqjpfx Ak Hjlg The stainless steel body ensures long service life, high hygiene standards and easy maintenance. Stable industrial construction makes this model an excellent choice for professional use. Technical specifications: Machine type: Vacuum machine Manufacturer: Multivac Model: A300/42 Material: Stainless steel Sealing bar length: 450 mm Power: 2.7 kW Power supply: 3 Ph Construction: Mobile Application: Vacuum packaging and sealing Use: Butcher shops, restaurants, food processing, professional kitchens Operation: Fast, efficient and reliable Maintenance: Easy and simple

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics Bedsyc Idbspfx Ak Hslg • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems Bedpfx Aeyw T Ipok Helg industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: excellent (used), For sale: Professional Siemens SIRIUS 3RW4453-2BC44 soft starter, designed for smooth starting of high-power three-phase motors. This unit is widely used in industrial applications to limit starting currents and reduce mechanical stress during motor start-up. SIRIUS 3RW44 series soft starters are commonly utilized in industrial installations, pumping stations, fans, crushers, conveyors, and large production machinery. The device is in good visual condition; actual state is shown in the photos. Technical Data • Manufacturer: Siemens • Series: SIRIUS • Model: 3RW4453-2BC44 • Type: Soft Starter / Semiconductor Motor Starter • Control voltage: 230 V AC • Operating voltage: 200 – 460 V AC • Frequency: 50 / 60 Hz • Rated current: 551 A • Maximum current: 954 A • Motor power: 160 kW at 230 V 315 kW at 400 V Bodsyua T Espfx Ak Helg up to 560 kW • Protection rating: IP00 Applications • Industrial pumps • High-power fans • Production lines • Conveyors • Industrial machinery ✔ smooth motor startup ✔ limitation of inrush currents ✔ protection for installation and machine mechanics ✔ equipment from renowned manufacturer Siemens Condition The item is used. Normal signs of use are present, but it is in good condition. Precise condition and completeness are shown in the photos.

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Blsdpfx Akoy Iydxj Hog

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8970 € 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min Bsdjwva Hpspfx Ak Holg 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 Bledpoy Ilvgsfx Ak Hog • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Bsdpjy Ir Hrofx Ak Helg Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. Blsdpey H Ri Asfx Ak Hog The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.

Condition: excellent (used), High-quality automatic strapping machine STRAPEX SMA30 for sale, in very good technical condition and ready for operation. This machine is ideal for warehouse, logistics, production applications, as well as for the packaging of cartons, pallets, and various loads. Blsdpfx Ajy Hxtiek Hsg ⸻ Technical specifications: • Model: STRAPEX SMA30 • Year of manufacture: 2021 • Strap width: 12 mm • Power supply: 230V (single phase) • Frequency: 50 Hz • Control voltage: 24V DC • Serial number: 121093031 ⸻ Equipment: • Side-mounted strap dispenser (large spool) • Electronic controls (tension and cycle adjustment) • Foot pedal actuator • Stainless steel worktable • Transport casters (mobile) • Emergency STOP button ⸻ Condition: The machine is in very good visual and technical condition. Fully functional, ready for immediate use. ⸻ Applications: • Warehousing • Logistics centers • Production facilities • Shipping/packaging operations • Securing cartons and parcels

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard Bledpfx Ajxw Syusk Hjg # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Machine Condition: Operational

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Bodpsxw R Udofx Ak Hslg Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg Bledpfx Aoxxrnbsk Hjg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder Bljdexxrc Sspfx Ak Heg - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: Bjdpoxw Ttiefx Ak Hslg # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Operational / In working condition.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: Bljdpfx Akexwvr Is Heg # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm Bodsxwvlnspfx Ak Hslg # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment Blodpexdxfqofx Ak Heg - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, mileage: 63,235 km, power: 105 kW (142.76 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,156 mm, total width: 2,099 mm, total height: 2,443 mm, loading space length: 2,708 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal Number: 1190. N067431 ----EQUIPMENT * Lockable AdBlue filler cap * Passenger-side airbag * 13-pin trailer socket * Electrically folding exterior mirrors * Battery: AGM battery 12 V / 92 Ah * Hill start assist * Diesel filler cap in red * Seat belt warning system for passenger seat * Main tank 93 liters * Terminal strip for electrical connections under driver’s seat base * Automatic climate control (Tempmatic) * Seats: Comfort driver’s seat * Radiator grille frame in body color * Ladder rack behind the cab * MBUX Multimedia System with 7-inch touchscreen High-resolution 7" touchscreen (960 x 540 pixels) AM/FM radio with dual tuner, Bluetooth connectivity with audio streaming and hands-free function, smartphone integration via Android Auto or Apple CarPlay, multimedia connection unit for linking portable devices via USB-C interface, 4 x 25 W output, sound adjustment, separate volume control for audio and phone, 2-way front speakers * Steering wheel: multifunction steering wheel * Cross member for trailer coupling, trailer load up to 2 t * Radio: Digital radio DAB * Rain sensor * Gear shift console optimized for passenger * Seats: lumbar support for driver’s seat * 230 V socket * Passenger compartment socket * Cruise control * Heat-insulating glass with band filter on front windshield * ADAPTIVE ESP (latest generation) with load- and speed-dependent dynamic driving control - Anti-lock Braking System (ABS) - Traction Control System (ASR) - Electronic Brakeforce Distribution (EBV) - Hydraulic Brake Assist (BAS) - Load Adaptive Control (LAC) - Roll Over Mitigation (ROM) - Roll Movement Intervention (RMI) - Enhanced Understeering Control (EUC) - Brake Disc Wiping (BDW) - Electronic Brake Prefill (EBP) - Easy Lane Change (ELC) * Overhead storage above windshield * Storage compartment under dashboard * Rear tow eye * Driver's airbag * Selectable all-wheel drive * Electrically adjustable and heated exterior mirrors, left and right * Outside temperature display * Adaptive brake lights * Diesel particulate filter and SCR * Tachometer * Headlight assistant * Electric window lifters for driver and passenger door * Transmission: 6-speed manual * Seat belt warning system for driver’s seat * Instrument panel and cluster with various storage options and optimized operating and display elements * KEYLESS-Start * Headrests (2), front * Paint: solid color * Steering wheel adjustable for tilt and height * Headlight range adjustment * Mercedes-Benz emergency call system, communication module (LTE) for digital services, breakdown management * Upholstery: fabric * Radio: radio prep (2 speakers) * Crosswind assist Bedewwn S Ajpfx Ak Helg * Power steering * Seats: armrest passenger seat * Seats: armrest driver seat * Seats: adjustable passenger seat * Seats: adjustable driver seat * Daytime running lights * Immobilizer * Central locking system with remote control ... and much more. ----The vehicle is unrestored/unprepared! Nationwide delivery available at an extra charge. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / leasing also possible without down payment! Do you have any questions? We will be happy to advise you!

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a professional vacuum conveyor unit from KOCH Technik (Type A130). This device is designed for the automatic conveying of plastic granulate or regrind directly to an injection moulding machine or extruder. The unit is distinguished by its extremely robust cast aluminium construction, built for demanding industrial use. Thanks to the quick-release system (clamping ring), the unit can be opened tool-free for cleaning or maintenance purposes. Technical data: Voltage: 24 V DC Type: A130 Year of manufacture: 06/2017 Material connection: Quick coupling (Camlock) Mounting: 4-hole flange plate Container volume: 12 to 15 litres Conveying distance: 10–15 metres, depending on the vacuum pump used Transport and loading can be organised across Europe on request, for an additional charge. Prices quoted are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Part-exchange or trade-in welcome! Bedpfxjy Iwkio Ak Hslg Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 16,500 kg, operation weight: 16,500 kg, number of seats: 1, Year of construction: 2017, operating hours: 9,183 h, Equipment: air conditioning, centralized greasing system, Komatsu WA 320PZ-6/Air Conditioning/Hydraulic Quick Coupler/Bucket/SW • Manufacturer: Komatsu • Model: WA 320 PZ-6 • Year of manufacture: 2017 • Operating hours: 9,183 h • Power: 127 kW/172 hp • Engine: 6-cylinder diesel engine • All-wheel drive • Air conditioning • Heated seat • Radio-CD • Hydraulic quick coupler • 1x bucket • Central lubrication system • Gross weight: 16,500 kg • One owner • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Intermediate sale reserved, Bjdpoyx Hf Rofx Ak Hslg - Errors and/or typographical mistakes excepted. - Sale according to our General Terms and Conditions.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,000 h, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, overall weight: 2,200 kg, total width: 1,185 mm, total height: 1,820 mm, product length (max.): 2,120 mm, number of axes: 7, This 7-axis Citizen Cincom A320-VII mod. A20-3F7 was manufactured in 2019. It features a maximum workable diameter of 20 mm, with an option for 25 mm, and a maximum workable length of 200 mm. The machine is equipped with a Fanuc 32i CNC control and includes a bar feeder, high-pressure coolant system, and a chiller. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom A320-VII machine we have for sale. Contact us for further details. • Working hours: 11,000 h • Max workable diameter: 20 mm (25 mm option included) • Max workable length per feeding: 200 mm (188 mm with 25 mm option) • Sub-spindle motor power: 1.5 / 1.1 kW Blodsy Iydfspfx Ak Hjg • Sub-spindle speed: max 8,000 rpm • Number of tools on main plate: 17 (5 turning, 4 radial driven, 4 front, 4 rear) • Driven tools speed: max 6,000 rpm (rated 4,500 rpm) • Required power supply: 3 phases, 200 V, 50/60 Hz, 7.1 kVA Additional equipment • LNS EXPRESS 320 S2 barfeeder (200–480 V, 3 phase, 50/60 Hz) • Extension to 25 mm diameter bar capacity • High-pressure coolant system • Rear part unloader • 1x radial driven tool • EFFEGI chiller / hydraulic unit • Spindle cooling radiator + pump • 165 L coolant tank Technical Specification Counter Spindle No Driven Tools Yes