Used Airset Sand / Binder Mixer for sale (4,220)

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation Godjxzg Eyspfx Ag Souh For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: used, This listing is for a Fisher Scientific Model 232 Vortex Mixer Gsdpfoxzg Hdex Ag Souh

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Godpfxsxzh Dde Ag Sjuh

Condition: used, Year of construction: 1998, Belt sanding unit for machining workpiece side surfaces with pneumatic belt tensioner. Godpfx Agjxqqcze Seuh Technical data: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - Two-roller device for free-belt sanding. Roller diameter 75 mm, adjustable center distance from 225 - 320 mm - Swiveling horizontal slide, stroke 130 / 220 mm, operated via handwheel - Fixed mounting for sanding unit - Feed device, pneumatically controlled, stroke 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working travel freely programmable by the automation - Cable carrier track for cable management and pneumatic hoses - Clamping of workpieces by spring, release by pneumatic cylinder

Condition: used, mileage: 1,84,291 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2028, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Internal vehicle number: G400082 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G400082 * Purchase price: €69,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,090.02 * Residual value: €12,380.00 If this offer is of interest to you or if you would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. Guodpfsy Tf Sxex Ag Soh We will gladly accept your used vehicle as part of the payment. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 3 axles, first registration: 09/2012, suspension: air, tire size: 385/65r22,5, wheelbase: 1,850 mm, Year of construction: 2012, General information Applicable material: Concrete Technical information Number of cylinders: 6 Gedpfsy Nk Rxsx Ag Souh Drivetrain Drive: Wheel Make of engine: Deutz Axle configuration Tyre size: 385/65r22,5 Suspension: air suspension Rear axle 1: Steering Weights Empty weight: 11.820 kg Carrying capacity: 27.180 kg GVW: 39.000 kg

Condition: excellent (used), warranty duration: 6 months, Kolb spiral mixer - used - model SF 50 - capacity 50 kg of dough (approx. 80 liters) Gjdpfx Aezvd Stog Ssuh - 2 speeds - manual control - stainless steel bowl and kneading hook - 6-month warranty - dimensions: width 560 mm, depth 950 mm, height 1,160 mm - price: 2,900 € EXW

Condition: new, functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, Mixer 250 liters with win-shaft and blades The machine has 2 reverse gear motors ×1.1 kw or total power 2.2 kW. Main characteristics: • Designed for homogeneous mixing of food products; • Made entirely of stainless steel; • Completely silent mixing process; • Two working augers with blades; • 2 new front discharge valves; Guedozun A Hepfx Ag Sjh • Easy cleaning of the machine; • Built-in two silent gear motors of the highest class; • Protective cover with limit switch; • Built-in electric. Part of it has moisture-proof control buttons. • Reverse mixing system in both directions; • Capacity: 250 liters; • Installation power 2.2KW, 400V, 50Hz;

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L Guodpfx Aozuxv Rjg Ssh - Motor: 15kW, 3-phase, 50Hz - Machine weight: 1300kg - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Year of construction: 2026, condition: new, The 600L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 600L Guodpfx Aezuxw Isg Sjh - Motor: 3kW, 3-phase, 50Hz - Machine weight: 360kg - Machine dimensions: (L 2050 x W 780 x H 1430mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Year of construction: 2026, condition: new, The 1000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. Gujdpfozux Aksx Ag Sjh - Capacity: 1000L - Motor: 5.5kW, 3-phase, 50Hz - Machine weight: 480kg - Machine dimensions: (L 2820 x W 980 x H 1970mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Gsdozuzbcspfx Ag Seuh Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: good (used), Diosna WV 240 A Premium wendel mixer. Direct from production where it was producing dough for a lamination line. (Complete line available for sale). 240 kg of dough (or 150 kg of flour) per batch. Stainless steel model. 2 identical machines available. Gjdpfx Aozugrmeg Sjuh

Condition: used, functionality: fully functional, De Stefani MVT edge grinder 1 grinding unit Maximum workpiece height: 100mm Grinding unit motor: 2.5 kW Self-sharpening grinding unit Manual adjustment of the grinding unit Manual adjustment of the grinding unit angle Gedeznu D Rspfx Ag Seuh Grinding unit with oscillation Feed speed adjustable via a variator Feed motor power: 0.74 kW

Condition: used, mileage: 2,82,093 km, power: 272 kW (369.82 HP), first registration: 11/2014, fuel type: diesel, tire size: 385/65r22,5, axle configuration: 8x4, wheelbase: 3,230 mm, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: air conditioning, electric window regulation, General information Applicable material: Concrete Technical information Number of cylinders: 6 GVW: 32.000 kg Drivetrain Drive: Wheel Make of engine: Volvo Transmission Transmission: I-SHIFT, Automatic Axle configuration Axle 1: Tyre size: 385/65r22,5; Suspension: leaf suspension Axle 2: Tyre size: 315/80r22,5; Double wheels; Suspension: air suspension Axle 3: Tyre size: 315/80r22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 385/65r22,5; Steering; Suspension: air suspension Gedpfszrgwksx Ag Seuh Functional Make of bodywork: LIEBHERR = Additional options and accessories = - PTO

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, total length: 1,250 mm, total width: 780 mm, total height: 1,350 mm, input frequency: 50 Hz, overall weight: 580 kg, power: 8 kW (10.88 HP), - Year of manufacture 2013 or 2015, in well-kept condition, from a small craft bakery, see also photos, technically and optically very good, checked and cleaned, new design with powerful 4 / 8 kW motor. - for up to 120 kg dough or approx. 75 kg flour - with 2 digital Diosna timer and 2 speeds - powerful 4 and 8 kW motor of the latest design - incl. protective cover (also available without intervention), bowl and kneading spiral in stainless steel - technically and optically in very good condition Gjdpfswh Scgjx Ag Ssuh Dimensions: approx. width 78 cm, depth 125 cm, height 135 cm, weight approx. 580 kg Price: BJ 2013: 8.450,- EUR netto ex warehouse Bergkamen BJ 2015: 8.950,- EUR netto ex warehouse Bergkamen Currently also refurbished and repainted or as SP 80 (new version) or 160 D in stock. Please enquire if you are interested.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH single-shaft concrete mixers are professional concrete production solutions that combine high efficiency and durability. Designed to achieve homogeneous mixtures, these mixers deliver long-lasting performance even under intensive working conditions. Thanks to their robust body structure, wear-resistant inner linings, and powerful mixing arms, high-strength concrete production can be easily achieved. The automatic lubrication system minimizes maintenance requirements by ensuring bearings are optimally lubricated during continuous operation. The mechanical system delivers vibration-free and stable operation by transferring power to the main shaft via a heavy-duty electric motor and gearbox. Ni-Hard mixing equipment provides superior protection against wear during long-term use, while replaceable liner plates reduce maintenance time. The maintenance cover with safety sensor and emergency stop button, featured on all models, maximizes operator safety. Godpexpi U Hsfx Ag Seuh Single Shaft Concrete Mixer Technical Specifications MODEL: CSS - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Side Body Wear Plates: 10 mm Hardox 450 Main Body Wear Plates: 15 mm Ni-Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL: CSS - 1 Loading Capacity: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox 450 Main Body Wear Plates: 15 mm Ni-Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL: CSS - 2 Loading Capacity: 3,000 liters Fresh Concrete Capacity: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox 450 Main Body Wear Plates: 20 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available Why Choose CONSTMACH Single-Shaft Concrete Mixers? CONSTMACH prioritizes quality and safety in production, offering maximum efficiency to users. Single-shaft concrete mixers operate smoothly for years thanks to their robust construction and easy maintenance. With high mixing performance, energy efficiency, and safety features, they can be used safely in any concrete production facility. At CONSTMACH, we offer our customers not just a machine, but a long-term investment with our mixers manufactured to international standards. If you are looking for quality, durability, and after-sales support all in one place, CONSTMACH is the right choice.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH tertiary impact crusher is an advanced crushing machine that provides high efficiency in rock crushing and sand making processes. It delivers superior performance, especially in crushing medium-hardness materials with low abrasive properties. This machine stands out with its ability to produce fine, cubic-shaped material down to 0.5 mm in a single pass. It is an ideal choice for producing high-quality aggregate in sectors such as construction, ready-mix concrete production, and asphalt applications. Tertiary crushers ensure that the material is produced in homogeneous sizes during the crushing process and enable more efficient utilization of the material thanks to their high reduction ratio. With these features, the CONSTMACH tertiary crusher is also frequently preferred as a “sand making machine” in stone crushing plants. Thanks to its high-speed rotating rotor system and adjustable crusher plates, the material can be crushed to the desired fineness. The hydraulic opening and adjustment mechanism allows operators to perform maintenance and replacement operations safely and quickly. Replaceable wear parts ensure long-term use and low operating costs. Furthermore, its design, suitable for operation in closed-circuit systems, provides consistent quality across different product sizes. Tertiary Crusher Technical Specifications MODEL: CTC - 1275 Rotor Diameter: 1,100 x 750 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 100 mm Capacity: 60 - 80 t/h Motor Power: 110 kW Weight: 9,500 kg MODEL: CTC - 1210 Rotor Diameter: 1,100 x 1,000 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 120 mm Capacity: 80 - 135 t/h Motor Power: 160 kW Weight: 12,500 kg MODEL: CTC - 1212 Gusdpoxpvb Hjfx Ag Soh Rotor Diameter: 1,100 x 1,200 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 120 - 170 t/h Motor Power: 200 kW Weight: 15,500 kg MODEL: CTC - 1215 Rotor Diameter: 1,100 x 1,500 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 230 - 250 t/h Motor Power: 250 kW Weight: 18,500 kg Why Choose CONSTMACH Tertiary Crushers CONSTMACH offers reliable solutions in crushing, screening, and concrete production equipment that meet international standards. Our tertiary impact crushers increase your operation's production efficiency with high quality, durability, and low maintenance costs. We are always by your side during the after-sales process with our spare parts and technical support services. If you are looking for a long-lasting, energy-efficient, and high-performance stone crushing machine, CONSTMACH is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Guodpoxl Dxlsfx Ag Ssh Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Gedpfx Asxvy Hgeg Sjuh Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Guodownh Eqopfx Ag Sjh Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), functionality: fully functional, For sale: a very nice semi-automatic thermal binding machine. Brand: Planax, type: Copybinder 5. Capacity: from 5 to 330 sheets, linen tapes, 200 books per hour. Voltage: 220/240 volts, made in Germany. Counter reading: only 43755. Includes a large number of strips. You are welcome to test the machine at our location. Gjdpjywic Aofx Ag Ssuh We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (within the Netherlands). Regards, Henk Hoos.

Condition: refurbished (used), WP UC120 spiral mixer with 2 bowls 200kg dough Guedpfx Asytgf Sog Ssh year of build 2005 higher mixer efficiency excellent dough preparation with high water absorption high air inclusion during the kneading cycle warranting voluminous, first-class kneading results no rosetting problems during kneading process gentle handling of doughs during the kneading cycle despite of high running speeds reduce the heating-up effect excellent reprocessing properties of the dough universal application for a great variety of doughs offering itself for smallest dough batches fruit and other ingredients can be gently and quickly added capacity in flour 120kg bowl contents 320 liter mixer motor 17 kW bowl motor 1.1 kW lifting motor 2 kW connected load 24 kVA

Condition: good (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 781921, For sale is a used mixer (paddle mixer) with a lifting tipper for standard trolleys from April 2022, in very good condition. This mixer was used for approximately 10 hours in April 2022 and has not been used since. The manufacturer is Laikidis from Greece, and the machine was purchased from Barsso in Belgium. Dimensions are visible in the pictures. All certificates, wiring diagrams, and operating manuals will be provided upon request. All pictures were taken upon delivery of the machine; the current condition shows minimal signs of use. Guodpeyvrabjfx Ag Soh

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Gedpoy R Ty Esfx Ag Ssuh Transport system Müller Martini 3520 Year: 2008 - Transport system, length (approx): 8 mtr Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents