Used Aus Kunststoff Durchmesser 25 Cm for sale (26,804)

Condition: used, Year of construction: 2022, operating hours: 405 h, fuel type: diesel, power: 31 kW (42.15 HP), Empty weight: 4.576 kg Lifting capacity: 2.500 kg Rental currency: EUR Hfsdpfxjyuaiyj Aflei Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2024, operating hours: 65 h, fuel type: diesel, power: 31 kW (42.15 HP), Empty weight: 4.530 kg Hodpeykhwkefx Aflsfi Lifting capacity: 2.500 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2024, operating hours: 60 h, fuel type: diesel, power: 31 kW (42.15 HP), Empty weight: 4.530 kg Lifting capacity: 2.500 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Hfodpeyualzsfx Aflei

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Hjdpfx Afox Ituqoljfi Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: good (used), Year of construction: 2023, operating hours: 545 h, load capacity: 2,500 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, Field of application: Internal logistics Number of valves: 3 General condition: very good Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Please contact Pieter de Vries , , ) for more information Hsdpfx Ajxakw Doflefi Additional options and accessories 3rd valve

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Hjdexqx Avjpfx Aflefi Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm. Hfjdod Hxrtopfx Aflei

Condition: good (used), Year of construction: 2004, clamping force: 1,250 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, Krauss Maffei 125-520 C2 General Information Model: 125-520 C2 Year of manufacture: 2004 Control system: MC4 Machine weight: 6,000 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping Unit Clamping force: 125 t Clamping system: 125 / … Platen size: 745 × 770 mm Hedpfoyxl Dlox Aflefi Tie bar spacing: 470 × 470 mm Opening stroke: 600 mm Max. platen distance: 900 mm Mold height: 300 mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit Injection unit: … / 520 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 275 ccm Shot weight: 250 g Specific injection pressure: 1,878 bar

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V Hjdpfx Afoylkxaslsfi • Frequency: 50 Hz Additional equipment • Cooler (included)

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine from Krauss-Maffei, model 125-520 C2. The machine was used in a company that places great emphasis on cleanliness and maintenance. Year of manufacture: 2004 Pneumatic needle valve 2x hydraulic core pull 83,000 operating hours Hjdpslkbhwefx Aflofi Form clamping force: 1500 kN MC 4 control system with color monitor, integrated control panel 4 additional cylinders: 1x D35 / 2x D40 / 1x D45, included Prices plus VAT Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Hfsdpfx Aeh Nmt Djflei Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2006, operating hours: 30 h, condition: used, functionality: fully functional, machine/vehicle number: 4292-1-197652, Used process plant from production changeover. The unit is suitable for applications involving viscous or temperature-sensitive media. Sale from location, inspection possible by appointment. Hedjy Akm Hspfx Afljfi

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope. Hfjdpfsf Nwqajx Afloi

Condition: used, functionality: fully functional, Ohaus SHHD2325AL Orbital Shaker OHAUS Heavy Duty Shakers are designed to handle a wide range of applications no matter how difficult the task. Powerful, convenient shakers provide consistent orbital shaking action. Capacity 22.7 kg Speed Range 25 rpm – 500 rpm Tray Size 45.7 cm x 61 cm (LxW) Control Analog Drive System Triple Eccentric; Brushless DC Motor Calibration Speed calibration Dimensions 61 cm x 14.9 cm x 67.8 cm (LxHxW) Hfedpfxswb Igzo Aflsi Net Weight 49 kg Orbit 1 in (25 mm) Power 230V, 2.5A, 50/60Hz Power Consumption 75 W Safety Certification CE; TUV Speed Accuracy ±1 rpm, Above 100 rpm ±1% of set speed Speed Range 25 rpm – 500 rpm Timer 1 minute – 120 minutes Tray Construction Aluminum Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Hfedpoxak Ucofx Aflsi Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Hfjdjw A N Hfjpfx Aflei Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: new, The Holzprofi RAS125 radial arm saw features a compact design for space-saving use in smaller workshops. For straight (90°), mitre cuts (45° left) and bevel cuts at 45° to the left and right on wood-based panels and solid wood panels up to 3 m in length. Its simple operation and high versatility enable a wide range of applications. It is ideal as a supplementary machine to a sliding table saw for precise crosscuts and mitre cuts. Advantages and features: - Versatile: Swivel arm (0° to 45° to the left and right) and tiltable cutting head (lockable at 45° to the left) enable a wide range of cutting operations and ensure maximum flexibility. - Safe: Noise-reduced full enclosure with safety switch, kickback protection, generously dimensioned work table and emergency stop button ensure maximum safety during cutting. - Robust: Sturdy steel construction, arm and base frame made of cast iron. Guides made of hardened, replaceable steel. - Precise: Cutting head glides on 8 ball bearings – for smooth, precise and effortless feed. Delivery without saw blade Technical data: Saw blade diameter 400 mm Spindle speed 2900 RPM Hfsdpfx Afjx H Ukwjlsi Rotation of saw arm +45° - -45° Tilting of the saw head 0 - 45° Cutting height at 90° 135 mm Cutting height at 45° 95 mm Cutting width 900 mm Table sitze 1000 x 980 mm Motor Power 5 kW S6 (4 kW S1) 400 V Weight 250 kg

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Hfsdpshz Dyaofx Aflei

Condition: good (used), Year of construction: 1997, operating hours: 92,000 h, functionality: fully functional, clamping force: 1,250 kN, overall weight: 6,300 kg, Krauss Maffei KM125-520 C1 Injection Moulding Machine for sale. Hfedpfxjw Hyd Ne Aflsi Including SEPRO robot. With shut-off nozzle and Stäubli quick-clamping system. Clamping Unit: Clamping force: 1250 kN Max. mold opening force: 70 kN Movable platen opening force: 35 kN Movable platen closing force: 28 kN Mounting plate (H x V): 745 x 770 mm Clearance between tie bars (H x V): 470 x 470 mm Mold opening stroke: 600 mm Min. mold installation height: 300 mm Maximum daylight: 900 mm Ejector stroke: 150 mm Ejector force forward/backward: 22/10 kN Injection Unit: Screw diameter: 40 mm L/D Ratio: 23 Injection pressure: 2377 bar Shot volume: 217 ccm Shot weight (PS): 198 g Injection rate: 126 ccm/s Screw speed: 307 rpm Electrohydraulic Equipment: Rated power of pump motor: 18.5 kW Installed heating power: 13 kW Number of cylinder heating zones: 5 Oil filling: 345 l Dimensions and Weights: Space requirement approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6000 kg Max. mold weight: 1485 kg If you have any further questions, please feel free to contact us at any time.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT Hedpfx Asuggb Deflefi  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 1997, Manufacturer: Bausch + Ströbel Bausch + Ströbel Model: ESA 1025 Type : Self-adhesive labeller for cartridges, ampoules and vials Year : 1997 Machine number 50414   Container Ø 8 mm to 25 mm Container height from 20 mm to 140 mm Label length from 26 mm to 85 mm Label height from 13 mm to 45 mm Maximum capacity: 25,000 labelled cartridges per hour Current format: Diameter 8.8 mm x Height 68 mm Cartridge Spare parts included Mechanical overhaul in 2020 Printer and camera control NOT included Hodpfex R Dg Njx Aflofi User manual in French Floor area (L x W x H) 150 x 220 x 190 cm Weight: 850 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: Hfjdpfx Afeit T Hyelei - Pressing force 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - Punching in ST 40 steel, e.g.: - up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Hodpfx Aouiykdoflefi

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible. Hfedpfow Emybsx Afloi

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Operating hours: approx. 63,000 h The machine can be inspected at any time Hfedpfjw D Rmisx Aflji