Used Metal stripping equipment for sale (51)

Year of construction: 2024, Condition: new, Technical Specifications: Maximum Cable Diameter: Ø 90mm Cpkcxjce Minimum Cable Diameter: Ø 5mm Cutting Speed: 10 m / min Electric Motor Power: 4 kW Machine Dimensions : 70cm x 131,5cm x 119cm Machine Weight: 460 kg • With the help of the “Safety System Stop” bar, operating accidents are reduced. • All electric-electronic materials will be SCHNEIDER and SIEMENS. • Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year. • The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: new, Year of construction: 2024, Diameter: 160mm Vi2Zo Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: used, Functionality: fully functional, “Wagner 451-115/180-600 G6” for Sale Cf720Sv988 With transformer from 400V. AC to 220V. DC. Manufacturer: Wagner Type: 451-115/180-600 G6 Power: 6,1/3,8 KW. Amperage: 27,8/17,2 A. Voltage: 220V.DC L x W: 1.800 x 1.150 mm. Conveyor belt: 1.200 mm. (Like new) AA. : 2.750 mm.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Dqpflh This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, overall weight: 850 kg, 2 pieces available 1 x year 2015; 1 x year 2013 Highly wear-resistant belt GB x AA: 750 x 1,590 mm Drum Ø: 320 mm 1.5 kW shaft-mounted geared motor Magnet: approx. 836 x 530 x 235 mm with suspension eyes Dpkmfr for belt width of max. 800 mm

Condition: excellent (used), Make: ERIEZ Bb2Vju3Mjiw Condition: function testet - Video available Magnet dimensions: 1180 x 540 mm Weight: 620 kg

Year of construction: 2002, Condition: used, Functionality: fully functional, Electric overbelt magnet with a 1400 mm wide band, the main dimensions are approximately 3500x2000x900 mm (lxwxh) Eruefeiu

Condition: new, Year of construction: 2024, MİZAR S series are designed to strip and remove the outer covering material of any cable exposing the internal material. MİZAR cable stripper machine can easily strip and remove the outer covering material of any size cable. Including: Steel Wired Armoured cables (SWA), double steel wired armoured cables, steel tapes, PVC covered cables, lead covered cables, thick rubber covered cables, nylon covered cables, low-grade cables, TT cables and more provide excellent performance. Rotors feed with hydromotors and blades setting supply with hydrolic pistons according to cable of types. With Uddeholm blades, they can shred and strip with longevity. All electrical and electronic components and equipment of MİZAR S series are “SIEMENS and SCHNEIDER”. CE and EAC certificates are available. TECHNICAL SPECIFICATIONS - FEATURE - VALUE CABLE DIMENSIONS - 1-120 mm CUTTING SPEED - 10 Meter/ min Bhsro8W0Ck ENGINE - 5,5kW LENGTH - 1.350 mm HEIGHT - 1.300 mm WIDTH - 800 mm WEIGHT - 470 Kg

Condition: good (used), Functionality: fully functional, “IFE MPL 1700 J-E” for Sale Cf7Z89K08K Manufacturer: IFE Aufbereitungstechnik GmbH Type: MPL 1700 J-E Magnet L x W x H: 1.075 x 1.710 x 353 mm. AA.: Ca. 1.850 mm. Belt widthness: 1.800 mm. (New Belt) Weight: 3.280 KG

Year of construction: 2021, operating hours: 0 h, Condition: new, machine/vehicle number: MLK 201, MODEL: MLK 201 DIMENSIONS (cm) 185 X 120 X 150 CM WEIGHT (Kg) 450 KG Npjvz CAPACITY : FROM 1 MM TO 90 MM MOTOR POWER (kW-rpm) : 4 KW 5,5 HP

Condition: good (used), Functionality: fully functional, total width: 1,500 mm, total height: 1,350 mm, overall weight: 2,655 kg, All machines, equipment and articles are sold second-hand. Warranty, exchange and guarantee are excluded. Goods are purchased as inspected on site. The sale is exclusively ex works, without valid inspection, e.g. UVV inspection Gienanth Chemnitz Guss GmbH concludes contracts exclusively on the basis of the current terms and conditions of sale, purchase and delivery as well as the applicable general terms and conditions. We are a foundry in Chemnitz and are closing after a major fire! Gpho78 The sale ends in November 24!

Condition: excellent (used), Suspension magnet / permanet magnet low iron volumes B3Ypkv2 area 60 x 80 cm

Condition: new, Year of construction: 2024, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Doy3Ot Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: not inspected (used), Functionality: unexamined, MAGNET FOR CRANE OR EXCAVATOR Cvbn2Wvr

Condition: good (used), Bakker Magnetics Eddy Current Separator System 29.723 / 18 . 800 mm. Wide . Ctmmkgogdu Complete with vibrating feeder, magnetic drum, frame with stands and control-unit. In good working condition.

Condition: good (used), total width: 1,500 mm, All machines, equipment and articles are sold second-hand. Warranty, exchange and guarantee are excluded. Goods are purchased as inspected on site. The sale is exclusively ex works, without valid inspection, e.g. UVV inspection Ux7Ndptne2 Gienanth Chemnitz Guss GmbH concludes contracts exclusively on the basis of the current terms and conditions of sale, purchase and delivery as well as the applicable general terms and conditions. We are a foundry in Chemnitz and are closing after a major fire! The sale ends in November 24!

Condition: excellent (used), Suspension magnet / permanet magnet area 220 x 63 cm Isplfdu

Condition: good (used), Year of construction: 2014, Manufacturer: SGM Magnetics Type: T-VIS 100 Year of manufacture: 2014 Huwfc9W With New Control-unit. See PDF-file below for more detailed information. Eddy Current Separator can be sandblasted and painted.

Condition: good (used), Year of construction: 2013, Functionality: fully functional, 1Pc. Christophel CitySort NE 1000 . Year of Manufacture: 2013 . Electric model . Ce3Csczoee

Condition: good (used), Functionality: fully functional, “3 Pcs. Steinert NE/NES 150 220 E 5009” for Sale Manufacturer: Steinert Ce22Dvm0Bu Type: NE/NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) With new of good used Control-unit 1Pc. Under-carriage with a height of 2.300mm. in stock . Overhauled, sandblasted and painted.

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 O0Xgf Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: good (used), Power: 7,8 kW. Bypcxs0P0K Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Overband separator will be overhauled, sandblasted, painted.

Condition: reconditioned (used), Steinert Eddy Current Separator. Type : NE 100 230 E 5013 . Kom.No.: 11-0643 . Fabr.No.: 722165 . With new 1.000mm. wide belt and new Control-unit. Gxawqam Overhauled, Balanced, sandblasted and painted .

Condition: good (used), Manufacturer: Bakker Magnetics 73Qnflsi9K Type: 29.724/12 Belt widthness: 1.000 mm (New belt) 1 Pc. Included: – Part of frame – Control-unit 1 Pc. Included: – Frame – Control-unit – Jöst FUF feeder (L x W 3.000 x 900 mm. with 2 Pcs. JV 156-330 Unbalance Motors of 0,95 KW each) Eddy Current Separators will be overhauled, sandblasted and painted.

Condition: refurbished (used), “2 Pcs. Steinert UMS 44 130 140 SOND” for Sale Find our complete stock on our website. Bsq8Hbfe0C Manufacturer: Steinert Type: UMS 44 130 140 SOND 14kW / 63,58A. / 220V. – 100% E.D. Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360mm – Conveyor Belt: 1.400mm – AA.: Ca. 2.900mm – Weight: 11 Tons – Transformer rectifier of 380V. Primary