Used Automatic Balance Valve for sale (29,019)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel Guodszxn Nnjpfx Akaeg 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Gedpfx Aozwhunekajug Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Godpjzy I Nqofx Akaoug Dimensions: Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, DISPENSA: Automatic strip dispenser for packaging machines Elevate your packaging operations with the DISPENSA, EUROMÁQUINA's innovative automatic strip dispensing system designed specifically for packaging machines. This advanced solution automates the precise insertion of separator strips, significantly enhancing efficiency and safety in your production line. The DISPENSA system offers a cost-effective alternative to fully robotic solutions, delivering superior performance with an optimized investment. KEY ADVANTAGES 📈 Increased productivity: Streamline your packaging process with automated, high-speed strip placement. ✅ Enhanced operator safety: Reduce manual intervention in repetitive and potentially hazardous tasks, creating a safer work environment. Guodpfxoyl Um Ij Akaog 💰 Reduced operating costs: Optimize material usage and labor, contributing directly to a more profitable operation. How it works? The DISPENSA integrates seamlessly with your existing packaging machine structure. It features adjustable strip loaders that adapt to various package lengths and strip requirements. Each loader incorporates an automatic dispenser, ensuring precise, one-by-one strip feeding and accurate positioning. Optional quick-change loaders are available for efficient offline reloading, minimizing downtime. The system is controlled via an intuitive HMI panel, allowing for easy parameterization and full synchronization with your packaging machine. Ready to optimize your packaging process? Contact us today to learn how the DISPENSA can benefit your production line. Application: Designed for automatic strip insertion in packaging machines Cost: More affordable than fully robotized systems Full integration & synchronization: It integrates seamlessly with your existing packaging machine Number of loaders: Adaptable, based on maximum package length and the required number of strips per package Longitudinal adjustment: Automatic precise positioning Loader capacity: Up to 250 separators (4mm thickness) Quick change: Optional Dispenser: Automatic feeding and positioning dispenser, supplying strips one by one with precision Control system: On-board pneumatic valve control group User interface: HMI control panel for intuitive parameterization

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us. Guodpfx Asy H Dblekajg

Condition: new, Year of construction: 2026, The CORMAK S910 band sawmill is a technologically advanced machine designed for professional cutting of large-diameter logs. Powered by a 22 HP petrol engine, this wood sawmill is ideal for locations without access to mains electricity, while maintaining high cutting precision and efficiency. The machine is suitable for both mobile sawmills and wood processing facilities. Main Advantages The RATO R670 22 HP petrol engine provides complete independence from the electrical grid. Maximum cutting width of 910 mm without guides. Maximum cutting width of 750 mm with guides. Maximum cutting thickness of 475 mm allows the processing of large-diameter logs. The four-column construction ensures stable guidance and low vibration levels. Dynamically balanced cast-iron drive wheels ensure precise and smooth blade operation. The cooling and lubrication system protects the blade against overheating and extends its service life. Manual feed and cutting unit height adjustment allow the machine to be adapted to different types of wood. Construction and Technology The CORMAK S910 is built on a reinforced bed made of steel profiles and features a four-column cutting unit guidance system, providing high rigidity and cutting precision even during prolonged operation. The 35 mm wide and 4000 mm long bandsaw blade operates at a speed of 17 m/s, producing a kerf of only 1.4–2.2 mm, which significantly reduces material waste. Cutting Precision and Efficiency The blade height can be adjusted from 47 mm to 740 mm, allowing the log to be precisely divided into multiple sections. The 6000 mm track length makes it possible to process even very long workpieces. A solid guide and adjustable stops stabilize the material being processed, positively affecting cutting repeatability and quality. Applications The CORMAK S910 wood sawmill is designed for use in mobile sawmills, wood processing plants, forestry operations, and companies producing sawn timber. It is ideally suited for cutting both softwood and hardwood. Gujdpfozzxqnsx Akajg Standard Equipment High-performance RATO 22 HP petrol engine 4000 × 35 mm bandsaw blade (included free of charge with purchase) 6 m long track Cooling and lubrication system Log clamping system with adjustable stop Bandsaw blade guard Optional Equipment Additional track sections Spare bandsaw blades Cutting height measurement system Manual or automatic longitudinal feed Technical Specifications Specification Value Engine type Petrol Engine power 22 HP Starter Electric Max. cutting width without guides 910 mm Max. cutting width with guides 750 mm Max. blade height 770 mm Min. blade height 47 mm Max. cutting thickness 475 mm Cutting length 6000 mm Bandsaw blade guard Yes Blade width 35 mm Blade length 4000 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 17 m/s Kerf 1.4–2.2 mm Coolant tank capacity 12 l Feed Manual Machine dimensions (L × W × H) 6000 × 1980 × 1810 mm Net weight 520 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 6 kg, The H-IRB 6T is a high-precision, belt-driven horizontal balancing machine designed for small rotors and shafts. It combines compact efficiency with industrial-grade reliability. Maximum Rotor Weight 6 kg (13.23 lb) Minimum Rotor Weight 0.1 kg (0.22 lb) Maximum Rotor Diameter 300 mm (11.81 in) Minimum Shaft Diameter 4 mm (0.16 in) Maximum Shaft Diameter 25 mm (0.98 in) Motor Power 0.4 kW (Servo System) Maximum Balancing Speed (Adjustable via potentiometer) 0 – 10,000 RPM Guodpfx Akjzfbh Dsajg Drive Unit Belt Bed Length 400 mm (15.75 in) Machine Weight 500 kg (1102.3 lb) Min. Achievable Residual Unbalance 0.1 g·mm/Kg Cycle Time 8-30 s Software MBS IBalancer v2.8 Language English Processor Intel-based processor OS Windows 11

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. Godpfezlpanex Akasug The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,900 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, fuel type: gas, mast type: triplex, construction height: 2,415 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,610 kg, total length: 2,555 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Torque converter / Automatic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 Guodpfx Akjzr Sq Aoasg Rear tire condition: 80 - 100% Description: Maintenance and safety inspection performed prior to delivery. The images show the current condition of the equipment. Side shifter, Additional attachments such as fork positioners or similar are available as options. 3rd valve, work light (rear), windshield, heater, load guard, full cabin, full free lift, CE certificate, safety light, windshield wiper.

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components - Fast tool changeover time - Servomotor as a spindle drive motor Guodpet Tuqbofx Akaog

Condition: like new (used), Year of construction: 2021, operating hours: 3,000 h, functionality: fully functional, turning length: 150 mm, turning diameter: 190 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, power: 44 kW (59.82 HP), Equipment: documentation/manual, Basic design of the machine: 2x TAKAMAZ tool turret with 12 stations / servomotor swivel drive Individual drive for driven tools C-axis control Machine bed in 60° inclined bed arrangement Air blast for clamping device cleaning on both spindles Hardened and precision-ground guideways Work area light 3-color signal light Control panel Electronic handwheel Single set control with handwheel Standard tool package Loading magazine Interface CE declaration of conformity, manuals Clamping system: Hydraulic hollow clamping cylinders Main spindle 1 piece HAINBUCH collet chuck size 52 SPANNTOP Axfix system, incl. changing device 1 piece HAINBUCH collet chuck size 52 System SPANNTOP Axfix High-pressure system: Büchele SFB 100 65 bar high-pressure system. 20l/min 2-fold valve changeover. Fire protection system: Kraft and Bauer Co2 extinguishing system with fire damper, pressure relief damper Bar feeder: Top automazioni Fusion 350M LTA extraction system Chip conveyor LMT grease rolling head: F4-1RN with holder Gujdpfxoth Udij Akasg Special equipment: Pneumatic ejector and flushing in the counter spindle Manual Guide Blow air on both spindles Chip conveyor, to the right Parts tray, conveyor belt output to the right Helical interpolation Polar coordinates and cylinder interpolation Tool presetter Automatic shutdown Tool breakage monitoring - Tool Monitor Long part removal through the counter spindle CCS Chip Control System

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,500 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,355 mm, fuel type: gas, mast type: triplex, construction height: 2,415 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 3,610 kg, total length: 2,555 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Gedpfx Akezr Sqveajug Mast type: Triplex Transmission: Torque converter / Automatic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 Rear tire condition: 80 - 100% Description: Maintenance and safety inspection renewed prior to delivery. Photos show the current condition of the machine. Side shift, Additional attachments such as a fork positioner or similar are available as optional extras. 3rd valve, work light at the rear, windshield, heater, load guard, full cabin, full free lift, CE certificate, safety light, windshield wiper.

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Gedpfx Aezv T Iwjkaeug

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Guodpfxozy Ilrs Akajg Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2026, condition: like new (used), functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled Godpfxjzkwh Ds Akaeug - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories - weight 1300 kg

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Gujdpfxjzy I Tpe Akaog Price: On request

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features Guedpfx Akexx Sawjasg - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: excellent (used), Balancing valve, shut-off valve, ball shut-off valve, ball valve, ball cock, pressure relief valve, shut-off valve, safety shut-off valve Godjx R Swvepfx Akaeug -Manufacturer: Kromschröder, shut-off valve safety shut-off valve with flange unused -Type: VSAV 50 / IF40 -Technical data: see photo type plate -Flange: DN 50 / bolt circle Ø 125 x 18 mm -Dimensions: 230/165/H280 mm -Weight: 5.5 kg/piece

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request Gjdpozy Imisfx Akaeug

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Professional high-sided cover, aluminum rims Equipment: - Movable tie-down points - V2A screws - 30mm aluminum side panels Net: €3,268.91 / Gross: €3,890.00 Article number: K41313251216.11 Technical data: • Brand: Koch-Anhänger • Model: 4.13 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 125 x 160 cm • External dimensions (LxWxH): 383 x 179 x 222 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Unladen weight: 240 kg • Payload: 1,060 kg • Chassis: Low loader (wheels next to the body) • Tires: 205/55R16 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • double-walled, anodized aluminum side panels 30 mm, with integrated aluminum frame • Side panel with load securing system; accessories such as tie-down points can be easily mounted without drilling. • Tie-down straps made of stainless steel (V2A rust-proof) • Elaborate longitudinal supports (2 longitudinal beams) • Stable plywood floor, non-slip (birch wood, waterproof glued) • Very stable latches for the tailgate made of V2A stainless steel (unique) • Maintenance-free rubber spring axle, hot-dip galvanized • Wheel shock absorbers + 100km/h approval • ALKO overrun device and parking brake • Suspension and drawbar from reputable manufacturer ALKO • Reverse automatic • Brake cables standard with "Profi-Longlife" (plastic sheathing of the steel wire rope) • 2x chock with holder • Standard equipped with balanced 1A brand tires • Large 205/55 R16 aluminum rims, black, tires balanced and capable of 100 km/h • Safety indicator on the coupling • Steel fenders • Tailgate easily removable • 13-pin connector • Rear lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • All screws are M8 stainless steel (V2A rust-proof) • Clear control panel with the most important data (tire pressure, cable layout...) • Koch Profi high-sided cover 160cm - original Koch, black • Cover incl. removable aluminum frame Gujdpfezy Dafsx Akasg • Incl. hook set and cover elastic bands • Incl. 2x rear supports mounted • Tool box at the front on the drawbar • Including 10 years Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any modifications! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516345H00091, Year of construction: 2017, operating hours: 7,098 h, load capacity: 2,500 kg, lifting height: 6,190 mm, free lift: 2,030 mm, fork length: 1,150 mm, empty load weight: 4,792 kg, TECHNICAL DETAILS Lifting height: 6,190 mm Gujdpfx Akszxcfwoaog Free lift: 2,030 mm Clearance height: 2,775 mm Lifting capacity: 2,500 kg Fork length: 1,150 mm Minimum fork width: 240 mm Maximum fork width: 1,040 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand / battery type: STILL 80 V PzS 560 Battery year of manufacture: 2017 Battery voltage: 80 V Battery capacity: 560 Ah Battery tray length: 1,025 mm Battery tray width: 710 mm Battery tray height: 785 mm Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,290 x 2,770 mm Unladen weight: 4,792 kg Operating hours: 7,098 h EQUIPMENT Joystick Non-marking tires Work lights Partial cabin Documentation CE marking Additional hydraulics: 3rd and 4th valve for fork carriage

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: Gjdpfx Akey Tybnjajug -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing Godpfxjzwhdis Akaeug - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: new, Year of construction: 2015, operating hours: 3,000 h, Operating hours: 3000. Water tank: 800 liters. Equipped with: 160 cm dispensing unit, lateral displacement 60 cm to the right, prepared for GPS integration. Optional: rear-view camera, 120 cm dispensing unit, 500 or 1,150-liter water tank, surface water pump (incl. hose and basket), high-capacity side nozzles, bracket for standpipe for hydrants, mounted on equipment carrier, e.g. Holder, Wille, Multihog, hand lance with 15 m water hose on the drum. Features: capacity per day: 17,000-35,000 m²/day*, operating speed at 100% weed coverage (min.): 0.5 km/h, average treatment speed: 3-5 km/h, operating speed at low weed coverage: min. 5 km/h, water consumption during weed control (min.): 34 l/min, drive via the hydraulic system of the carrier vehicle (min. 60 l/min at 180 bar), 2 x high-tech burners 110 kW with min. 92% efficiency according to EN 303-2, burner emission class: > EURO 6, automatic water softening system with 5 l canister and level monitoring, control unit with touchscreen for controlling and monitoring the system in the carrier vehicle, data storage for 5 days and daily performance readout via USB stick (Excel format), preparation for GPS integration, water pressure during weed control: 0.2 bar, water temperature at the plant during weed control: 98-99.6°C, active temperature control (software-controlled - no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C), burner drive: diesel or Aspen D biodiesel, capacity of the burner tank: 105 l, capacity of the water tank: 800 l, standpipe bracket, reversing camera, sensor-based dispensing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections, dispensing unit: working width 160 cm, lateral working nozzles (2 left, 2 right), plus 2 high-performance nozzles left and right, with 60 cm lateral displacement to the right, stainless steel hose reel with 15 meter hose and 20 cm hand lance, adapter and frame with support feet for mounting the unit on the carrier vehicle, water tank (plastic) 800 liters with C-pipe connection and level indicator, dry-run protection, water filter, standard color: RAL 9006, weight of the heating unit (net): 560 kg (without water and fuel), machine dimensions: (L x W x H) 3,500 x 1,750 x 1,600 mm, weight of the dispensing unit: 340 kg, storage location: null. Gujdpju Hf A Ajfx Akaog

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m Gujdpfjzy Iqhox Akajg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request