Used wide planing machinery for sale (28)

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls Codjyh Uqcjpfx Agkegp - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: Cedpfx Ajx S Ngksgkjgp – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Cgsdpfx Agsyk Tvlekep Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Planer table Precision work in terms of dimension and angle

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, planing width: 120 mm, planing height: 100 mm, working width: 115 mm, working height: 100 mm, planer shaft diameter: 50 mm, chip removal for surfacing (max.): 125 mm, extraction nozzle diameter: 125 mm, overall weight: 23,800 kg, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, table height: 950 mm, type of input current: three-phase, 1. TECH-TOM STG Preliminary Planing Line for Short Wooden Elements Basic information: Model: STG-2 / STG-4 Codjykztfopfx Agkogp Manufacturer: TECH-TOM (Poland) Machine Type: Preliminary planing line for short wooden elements Year of manufacture: 2021 Year of last modification: 2024 Net price: €359,000 A) Composition of the Preliminary Planing Line • Heavy-duty roller conveyors, up to 12,000 mm x 1,800 mm, for the transportation and storage of pallets with dry wooden components prepared for preliminary planing • Scissor lifts with 1,200 kg lifting capacity, platform dimensions 1,800 mm x 1,600 mm, for lifting pallets with wooden elements so the operator can comfortably load the moulder’s infeed magazine • Belt feeders with a horizontal magazine, 800 mm long, 5 units. Maximum loadable workpiece: width 110 mm, length 600 mm, thickness 100 mm • STG-2 planers, 5 dual-spindle machines: top and bottom spindles, infeed and transportation of wood elements via toothed-chain conveyor • STG-4 planers, 6 four-spindle machines (1 unit as a spare): four-sided planing - top, bottom, right, and left spindles, with chain-feed system guiding the workpiece • Inter-planer conveyors for automatic transfer of workpieces from the first planer, automatic flip (top/bottom), and automatic loading into the four-spindle STG-4 planer – 5 units • Chain conveyors with magazines, 6 units (1 as a spare), for processing wooden elements (thickness and width reduction). These feeders are installed at the infeed of the STG-4 planer. • Outfeed belt conveyor, 25 metres long, from the planers with stainless steel grading/sorting desk, 520 mm wide, 13,500 mm long, equipped with a linear laser for centre-line stacking of wooden elements • 10 sorting stations for classifying wooden elements and sorting out defective or thin side/end trimmings • 11 auxiliary tables for sorting and placing trimmings, 1,500 mm x 400 mm • Scissor lifts for Euro pallets, 1,300 x 900 mm, 22 units, 600 kg lifting capacity each • Scissor lifts for dual-spindle STG-4 planers, 1,800 x 1,600 mm, 5 units, 1,200 kg capacity • Circular saws with rail-mounted carriage for end trimming and cross-cutting wooden components, 2 units • Loading ramp for planing pallets with wooden elements – 6 rows with roller conveyors 12 metres each, 1,800 mm wide • Roller conveyor warehouse for Euro pallets, running length 170 metres, 900 mm wide B) Technical specifications Material dimensions and range • Incoming wood length: 120 mm to 600 mm • Maximum width: 115 mm • Maximum thickness: 100 mm • Number of planing heads: STG-2 (2 heads, top/bottom), STG-4 (4 heads, top/bottom/left/right) Drive and power • Total connection power: STG-2 – 14 kW, STG-4 – 22 kW • Machine weight: approx. 2,380 kg Required space and installation • Required length: approx. 18 m • Required width: approx. 12 m

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, planing width: 620 mm, planing height: 300 mm, working width: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Year of Manufacture: 2003 General Data Machine type: Planing and profiling machine with chamfering units Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty outfeed unit (AZG): 4 rollers, pneumatic roller pressure, universal joint shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Cjdpfxoymgxxe Agkegp Left working spindle: 22 kW • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable depending on chamfer width Total number of processing tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Auxiliary motors (individually): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation in the appendix) Switch cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality dimensional timber such as structural solid wood (KVH), Duo/Trio beams or glulam. Additionally, machines of the SUPERMASTER series are also used in the production of cross laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen as well as small, fine workpieces are processed effortlessly by the SUPERMASTER.

Condition: used, transversal substructure for planing machine Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained Csdpfx Aoimz Egsgkogp REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height Cedpfxox Ehfce Agkogp – Right-side guide fence – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested Cedpfxsimz D Us Agkegp >>REX New price over 20,000 €

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Cjdpfeydk Irex Agkjgp Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes Cgedpfx Agox Upt Ajkep CE

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired Cjdpfx Agjwg S Tvskegp C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: used, Empty weight: 6.000 kg Dimensions (LxBxH): 340 x 210 x 190 cm Price: On request - Documentation available: No - CE certificate present: No Cgedpfx Asxbf Iaegkep - Max. working width: 860 - Transport dimensions: 3400mm x 2100mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, Price: On request Double-sided planer REX HOMS 630 Serial No. 16831 380V, 102.6Amp 67.5HP Equipped with 3 planing shafts Cgsdpfxewng Ike Agkjp 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Cgsdpfx Agox Rrykskjp

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality Cgodpfeqlck Nsx Agkjp the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg Cgedpfxeqlckpo Agkop - immediately available -

Condition: good (used), Year of construction: 1975, functionality: fully functional, planing width: 860 mm, planing height: 310 mm, working width: 860 mm, working height: 750 mm, chip removal: 20 mm, rotational speed (max.): 4,200 rpm, number of planer blades: 4, heavy-duty thickness planer, very well suited for construction timber, etc., constant table height, sturdy roller conveyor with drive in the infeed area, sturdy roller conveyor without drive in the outfeed area Cgjdpfx Agexfl A Sskep

Condition: used, Empty weight: 1.500 kg Dimensions (LxBxH): 150 x 140 x 150 cm Double-sided planer MIC AM2 Max working width 510mm Roll up and down 2 knives per planer head Cgodpfownhhxox Agkjp - Documentation available: No - CE certificate present: No - Serial number: 1652.75 - Transport dimensions: 1500mm x 1400mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Double-sided planer Fisher HMB-85 Max working width 850mm Max working height 240mm Roll top and bottom 1st axis; below; grooved shaft 5.5kW Motor 2nd axis; below; flats 15kW 3rd axis; above; flats 15kW With groove bed! - Documentation available: No - CE certificate present: No - Motor braked: No Financial information VAT: The price shown is exclusive of VAT Cgjdpewnhhrofx Agkep VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1972, Empty weight: 3.000 kg Dimensions (LxBxH): 180 x 170 x 200 cm Four-sided planer Küpfermuhle 600 planing width 600 mm planing height 190 mm Cgjdpfx Agownhbxekjp Angled bottom cutterblock 9 kW Top inclined cutterblock 11 kW Vertical spindle right 4 kW Vertical spindle left 5.5 kW Dimensions approx. 1800 x 2000 x 1700 mm (LxWxH), Weight 3000. - Year: 1972 - Documentation available: No - CE certificate present: No - Serial number: 9552 - Transport dimensions: 1800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm Cgjdei Apuhspfx Agkjp - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min Codpfxshq Rp He Agkjgp - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Cgjdpfx Agowmm Aljksp

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Cgjdpfx Agsx Exbdokop

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Cjdel Dw Nxopfx Agkegp long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.