Used Camam 2 Table Mortiser for sale (85,431)

Condition: excellent (used), Year of construction: 2003, total length: 7,750 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT tank container / swap body, Guodpoycwhpefx Alboc 28,095L / single compartment bottom discharge UN PORTABLE, T11 steam heating (10 bar) insulated design temperature: -40° to +220°C, Payload: 31,230 kg ADR and CSC inspection valid until 05-2028 = Further Information = General Information Year of manufacture: Jan. 2003 Model year: 2003 Weights Tare weight: 4,770 kg Payload: 31,230 kg Gross vehicle weight: 36,000 kg Functional Loading capacity: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good For more information, please contact Arne Honingh.

Condition: excellent (used), Year of construction: 2010, total length: 7,850 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container SWAP BODY 30,000L / 1-compartment Bottom discharge UN PORTABLE, T11 Steam-heating Insulated Payload: 31,440 kg, 5-year approval + CSC inspection valid until 06/2028 = Further Information = General Information Year of manufacture: Dec. 2010 Model year: 2010 Weights Unladen weight: 4,580 kg Payload: 31,420 kg Gross vehicle weight: 36,000 kg Functionality Cargo space capacity: 30,850 l Body brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Godpoycwbiofx Albeuc Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 2016, operating hours: 2,400 h, load capacity: 6,000 kg, fuel type: electric, color: red, 2016 MAFI heavy-duty trailers with double steering and coupling capability (floor: 250x130 cm), load capacity 6,000 kg, 9 units available = Further Information = General Information Year of manufacture: Sept. 2016 Model year: 2016 Axle Configuration Front axle: Steered Rear axle: Steered Weights Unladen weight: 525 kg Gujdpfx Alexztadjbjc Gross weight: 6,525 kg Functionality Body brand: MAFI 1060/6t Condition Technical condition: Very good Optical condition: Very good Further information Please contact Arne Honingh for more details.

Condition: good (used), Year of construction: 2003, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Van Hool 20FT Tank Container / Swap Body 31,800L / 1-compartment Bottom Discharge UN Portable, T7 Steam Heating Insulated Payload: 31,860 kg Design Temperature: -40/+130°C 5-Year Valid ADR Inspection: 03/2028 = Further Information = General Information Year of manufacture: Sept. 2003 Model year: 2003 Weights Unladen weight: 4,140 kg Payload: 31,860 kg Guodpfx Alox U A U Tjbec Gross vehicle weight: 36,000 kg Functional Cargo compartment volume: 30,850 l Body manufacturer: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: Good Visual condition: Good Further information Please contact Arne Honingh for more information.

Condition: used, This listing is for the Sigma 2-15 Centrifuge Gsdpfx Alsxhffrobeuc +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. Guodjv Aalyopfx Albec - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Gusdpfx Aljv Sut Rjbsc

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Gsdpon Nv Tijfx Albeuc Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! With digital display of travel distances! TECHNICAL DETAILS X-axis: 1,250 mm Godpfx Aszaqxcelbeuc Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18-1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT Accessories shown in the pictures, including tools, tool cabinets, and clamping devices.

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: 12156, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,490 mm, spindle speed (max.): 1,250 rpm, workpiece weight (max.): 6,300 kg, TECHNICAL DETAILS Spindle diameter: 110 mm Drilling spindle speed range: 6.3 - 1,250 rpm (in 4 steps) Facing head speed range: 6.3 - 315 rpm (in 2 steps) Gedpfx Ajzb Dqbjlbsuc Travel in X-axis: 1,985 mm Travel in Y-axis: 1,270 mm Travel in Z-axis: 1,260 mm (with tailstock 1,490 mm) Travel in W-axis (spindle longitudinal): 710 mm Travel in U-axis (facing slide radial): 250 mm Table size: 1,600 x 1,400 mm Table load capacity: 6.3 t Table rotation range: 360° Tool holder: ISO 50 Feed rate steps for table and spindle head vertical: 5 - 2,500 mm/min Turning diameter for drilling max.: 630 mm Turning diameter for facing max.: 1,250 mm MACHINE DETAILS Control system: NC Control for program: Heidenhain 320 Total power requirement: approx. 90 kW Machine weight: approx. 30 t EQUIPMENT Tailstock Facing slide 700 Electronic handwheel Note: Currently, the machine has an electrical fault and requires repair!

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 12018, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, TECHNICAL DETAILS Spindle diameter: 130 mm Drilling spindle speed: 3 – 1,000 rpm Travel range X-axis: 2,750 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 1,250 mm Travel range B-axis (table): 360° Travel range W-axis (spindle, longitudinal): 900 mm Table dimensions: 1,600 mm x 1,400 mm Maximum table load: 6.3 t Tool holder: SK50 Gedpszb Davofx Albouc MACHINE DETAILS Control system type: CNC Control model: TNC 155 path control Total power requirement: 100 kW Dimensions & Weight Dimensions of control cabinet (L x W x H): 650 mm x 2,800 mm x 2,100 mm Machine weight: approx. 15 t EQUIPMENT Planoslide feed 210 mm (U-axis) Hydraulic unit Outrigger with control panel Measuring system (manufacturer: Heidenhain)

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: OB 21307, feed length X-axis: 5,000 mm, feed length Y-axis: 3,200 mm, feed length Z-axis: 1,250 mm, overall weight: 1,00,000 kg, power: 83 kW (112.85 HP), the machine has just been imported from europe and is in dismantle condition. It was running in a factory in Europe previously. Gusdpfx Alsy Ukileboc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Digicon series 2 2010 model specifications: • Web Width: 330 mm • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm Gedpfxjyl Alfo Albeuc • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 - Rotary and flat blade spitting

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. Gedsv Sa I Tspfx Albouc While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg Gusdjrwx U Ispfx Albec AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. Godpfx Alehh Dnxsbeuc TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) • Machining Height: 2,100 mm / 3,500 mm • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.

Condition: new, Year of construction: 2026, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, NEW 2026 – REM SC 44 CNC 2SF | Heavy-Duty CNC Vertical Turning Center Top-of-the-range CNC Vertical Turning Center from REM Bacau, featuring dual milling heads, dual automatic tool changers and Siemens Sinumerik 840D SL control. Built for the most demanding heavy machining applications. TURNING ENVELOPE: • Faceplate Diameter: 4,000 mm • Machining Diameter: 4,400 mm • Machining Height: 2,000 mm • Max. Workpiece Weight: 16,000 kg AXIS TRAVELS: • X-Axis (Ram Carriage): 2,500 mm • W-Axis (Elevating Cross Rail): 1,200 mm • Z-Axis (Ram Vertical Travel): 1,250 mm • Indexing Step: 300 mm WORK TABLE: • Diameter: 4,000 mm | Speed: 1–60 (90) rpm Gedpfog Uwmqox Albjuc • Power (S1): 100 kW | Torque: 110,000 Nm • C-Axis: 0.02–1.5 rpm | C-Axis Torque: 55,000 Nm MILLING RAM (250×250 mm | KM 63 / ISO 50): • Ram Speed: 0–2,500 rpm | Power: 40 kW | Torque: 1,400 Nm TOOLING: • 2× ATC Magazine (12 turning + 12 milling tools each) • Control: Siemens Sinumerik 840D SL Manufactured by REM Bacau – Romania | 60+ years of expertise. Fully inspected and tested. Export worldwide. Contact us for pricing, videos, and full specs.

Condition: good (used), Muro 1002 Paper Jogger Description: Gsdpezdat Dsfx Albjuc The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek Godpfxezc H T Us Albeuc High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 214 KW

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER 8020 TECHNICAL DATA - Max. diameter of the main saw blade with scoring blade: 400mm - Main blade adjustable up/down and at an angle - Spindle diameter: 30mm - Spindle locking Guodpfxjzdd A No Alboc - With a rip fence carriage - With a crosscut fence carriage - Length of rip fence carriage: 3200mm - Cutting width with fence: 1240mm - With a crosscut fence carriage - With a scoring blade - Max. diameter of scoring blade: 120mm - Scoring blade motor: 0.75kW - Main motor: 5.5kW - 2 speed settings - Table dimensions: 1060x650mm - Table extension: 1660x1550mm - Large blade guard - Diameter of dust extraction port: 100mm - Dimensions (L/W/H): 3600x3220x1300mm - Weight: 700kg ADVANTAGES - Made in Austria - With a scoring blade - DTR documentation - Used machine, very good condition Net price: 9900 PLN Net price: 2357 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Year of construction: 2024, operating hours: 30 h, condition: like new (used), functionality: fully functional, Brand: DN Solutions Model: Lynx 2100LC Type: CNC lathe Chuck Size: 10 inch Max Turning Diameter: Ø350 mm Max Turning Length: 537 mm Bar Capacity: Ø81 mm Godpfjy U Dpfjx Albeuc X/Z Axis Travel: 205 / 560 mm Rapid Traverse X/Z: 30 / 36 m/min Spindle Speed: 3,500 rpm Spindle Power: 18.5 / 15 kW Spindle Nose: A2-8 Turret: 12 station Tool Size: 25 × 25 mm Control Unit: FANUC i Series Tailstock: MT#4 Machine Weight: Approx. 3,450 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Godpfx Aleuqw E Njbjuc Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: excellent (used), Year of construction: 2007, EVG POLYBEND Type PBC 2-16, year 2007 Description: EVG Polybend stirrup machine PBE 2-16 with 2 Pay offs Technical data for EVG POLYBEND Type PBC 2-16, year 2007 • Single Stand: 6-16 mm wire diameter • Double Stand 2x6-2x12 mm wire diameter Guodpjyxpirefx Albsc • Bending angle: +/- 200 ° • Bending speed: max 1500° /sec • Advance speed: const 125 m/min • Power drive (including hydraulics + cooler) 51 + 0,5 kW • Electric servo-motor driving system for wire advance and bending part • Bending heads and mandrel diameters correspond to the standards • Right and left hand bending in two plains • Roller- type straightening unit • Hydraulically actuated sheards • Hydraulic unit for auxiliary drive with oil/air cooler adapter to local conditions including hydrau- lic oil filling • Control cabinet with industry PC-control system based on windows 7 including network connec- tion. (New PC purchased in 2022) • Automatic calculation of length taking into consideration the mandrel and wire diameters as well as the bending angles for usual wire/mandrel diameter ratio. • True-to-scale graphic representation of stirrup shapes including stirrup log dimensions on 15” TFT-display. • Circular bends possible by entry of radius and arc angle or radius and stretched length. • Pre-programing of standard stirrup shapes acc to customer’s needs. • Mandrel diameters of 32, 40,50,60 and 80 mm • 2 wire pay-off type GC 3000 M • Rod collecting bench composed of sections of 3 m length each, total of 4 sections. • The manuals available are in German and Rumanian language, including service manual, founda- tion and cable layouts in English language, spare part catalogue in English language.

Condition: excellent (used), Type: ZF 2 Manufacturer: WAFIOS Year of manufacture: - Serial No.: 2.1062.013 Capacity: 45 weft wires/min = 3.712 m Linear wire diameter: Core: 1.6 mm / Outer diameter: 2.6 mm Weft wire diameter: Core: 2.6 mm / Outer diameter: 3.6 mm Tensile strength: 600 – 700 N/mm² Number of twists of the 3 line wires: Crimp pitch: 19.14 mm Linear wire spacing: 153 mm Weft wire spacing: 82.5 mm Max. braid height: 1,250 mm Condition of the machine(s): Used, dismantled Gsdpowr Akcjfx Albouc

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 Godpfxjn Ut A Se Albouc comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997