Used Canon Imagerunner Advance for sale (2,653)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Hochdorf
6,820 km
Temperature Cooling Unit (TCU)
SingleWater Advanced WP7
Call
Condition: new, *TECHNICAL SPECIFICATION:
Heating capacity: up to 54 kW
Cooling capacity: up to 300 kW
medium: water up to 200°C
Max. external volume: 43 ltr at 200°C
max. Flow rate: max. 230 l/min
max. delivery pressure: up to 8.3 bar
Motor power: up to 3 kW
Dimensions LxWxH: 1,460 x 525 x 1,200 mm
Weight approx. 330kg
Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1
*HIGHLIGHTS EQUIPMENT:
-Control and regulation Smart Controller (7" touch display)
-Heating control via solid-state relay
-Control box IP54, externally ventilated
-Expansion tank, heater and piping stainless steel
-Heating via stainless steel tubular heating elements made of Incolloy
-Dirt trap (circulation)
-Unit ready for connection and mounted on castors, 2 of them steerable and with brake
-Cooling and filling controlled by solenoid valve
-configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow)
-flow measurement by differential pressure principle
-Level monitoring by magnetic float switch
-automatic temperature-dependent system closure (not with WP7-90)
-flow monitoring by recording the flow rate
-Bypass between flow and return with reduced cross-section
-dirty filter in the cooling water inflow, filling and return of the circulation system
-Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200)
-System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200)
-Pressure booster pump for system filling (WP7-180/200, otherwise optional)
-Safety temperature limiter (STB) in the heater and flow (WP7-200)
-Pressure gauge in the supply line on the back of the unit
-heat-insulated circulation circuit (WP7-150/180/200)
Visit our website for more details or for other performance classes.
Rjdjg Ey T Espfx Akwju
*This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.
Listing
Hochdorf
6,820 km
Temperatre Cooling Unit (TCU)
SingleOil Advanced D2
Call
Condition: new, *TECHNICAL SPECIFICATION:
Heating capacity: up to 36 kW
Cooling capacity: up to 116 kW
medium: oil up to 350°C
Maximum external volume: 66 ltr at 350°C
max. flow rate: up to 150 l/min
max. delivery pressure: up to 8,0 bar
Motor power: 2.8 or 4 kW
Dimensions LxWxH: 1,414 x 503 x 1,350 mm
(without connections for continuous bypass)
Weight approx. 225-320 kg
Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1
*HIGHLIGHTS EQUIPMENT:
-Regulation and control unit Smart Controller (7" Touch-Displ)
-Heating control via solid-state relay
-Control box IP54
-Cooling controlled via solenoid valve
-Flow measurement using the differential pressure principle
-Bypass between flow and return with reduced cross-section
-Level monitoring by means of magnetic float switch
-flow monitoring by recording the heating rod surface temperature and the flow rate
-dirt filter in the cooling water supply and in the return of the circulation system
-monitoring of the flow temperature by electronic safety temperature limiter
-external oil filler neck
Redpfxeg Ey Rfe Akwsu
-Dilo fittings on internal piping connections (except pump connections)
-at 350°C: continuous bypass, including bellows valves
-Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option)
Visit our website for more details or for other performance classes.
*Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.
Listing
Hochdorf
6,820 km
Temperature Control Unit/ Chiller
Single Temperiertechnik GmbHChill Advanced C-25-L
Call
Condition: new, *Technical specification:
-air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C.
-temperature range flow: +5°C to +30°C
(optionally lower temperatures down to -5°C possible)
-air flow rate: 8,000 m³/h
-max. air inlet temperature: +30°C
-Optionally with heating capacity up to 24kW
*Pumps:
-Delivery capacity up to 150 ltr/ min.
-Delivery pressure up to max. 4 or 7 bar
-Motor output 1.1 or 2.2 kW
*Dimensions:
-L/W/H: 1,450 mm x 750 mm x 1,680 mm
-empty weight: approx. 480 kg
-Circulation medium connection: DN 32 IG
*Details & Highlights:
-Internal refrigerant: R 123 a
-Power supply: 380-425V/ 50Hz
-Regulation and control unit SBC-T
-Setpoint and actual value display, alarm display
-Fully hermetic reciprocating compressor
-Refrigerant receiver with safety valve according to DIN EN 378
-capacity control
-frost protection monitoring
-Flow monitoring
-grid cover over condenser
-oil sump heater
Rodpfx Aeg Ewwrskweu
-drainage device
-Level monitoring by magnetic float switch
-installed dirt trap in the return line in the circulating medium
-overflow valve between flow and return as pump protection, fixed setting
-high and low pressure limiter according to DIN EN 378
-stainless steel tank, capacity: 80 litres, open system completely insulated
Self-supporting housing with castors, mobile
-system for indoor installation
-control box IP 54
Other performance classes are available on request. Visit our homepage for further details.
*This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Wald
6,842 km
Digital printing machine
Wolke VideojetM 600 advanced
Call
Condition: ready for operation (used), Wolke M 600 advanced labeling system controller
Device is in very good condition ( like new )
230 V
50/60Hz
Accessories:
Rotary encoder for Wolke printer
Splitter box for Wolke printers
Print head for Wolke printer
You are welcome to come by for a viewing.
You will receive a proper invoice.
A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number.
Rjdpfx Aop T Uiqjkweu
Subject to prior sale.
Visit our store and have a look at our other offers.
Company names and trademarks are the property of their owners and are used only to identify and describe the products.
Deviations from technical data and errors in the description of the article may occur and are reserved.
Listing
Hilden
7,007 km
Semitrailer
SCHMITZThermo King Advancer A400 DS Strom Blumen LBW
Call
Condition: used, empty load weight: 8,910 kg, maximum load weight: 30,090 kg, overall weight: 39,000 kg, first registration: 03/2025, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, electronic stability program (ESP), tail-lift, NEW!! Schmitz refrigerated trailer with Thermo King refrigeration
- Refrigeration unit: Thermo King Advancer a400
- 13.40 x 2.50 x 2.65 m
- Double-decker
- Wide platform
- Tail lift
- Power connection
- Disc brakes
- Temperature recorder
- Schmitz axles
- Lift axle
- Pallet box
- Aluminum floor
- FRC 2030
- Tires: 385/65/22.5
NEW! Net export price!
NEW!!! Schmitz deep-freeze trailers with Thermo King refrigeration
- Refrigeration unit: Thermo King Advancer a400
- 13.40 x 2.50 x 2.65 m
- Double deck
- Flower width
- Lift gate
- Power connection
- Disc brakes
- Temperature recorder
- Schmitz axles
- Lift axle
- pallet box
- Aluminum floor
- FRC 2030
- Tires: 385/65/22.5
Rodov Tzliopfx Akwsu
NEW! Net export price!
NEW!! Schmitz semi-remorque refrigerator with Thermo King refrigeration
- Groupe frigorifique: Thermo King Advancer a400
- 13.40 x 2.50 x 2.65 m
- double floor
- Largeur de la fleur
- Electric raccording
- Freins à disques
- Temperature recorder
-Essieux Schmitz
- Essieu relevable
- caisses palettes
- Plancher in aluminum
- FRC 2030
- Tires: 385/65/22.5
NEW! Prix net export!
Yourtrucks Group
The Yourtrucks Group maintains business relationships around the globe. Both purchases and sales extend across national borders, so you will generally find the export price in our advertisements, as this is independent of the place of use.
Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be viewed as non-binding general information and does not replace detailed, individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos, and advance sales.
Our general terms and conditions apply exclusively.
Languages
- We speak English
- On parle francais
- ?? ????? ?? ?????
- Mówimy po polsku
- Hablamos español
- Falamos português
- Parliamo italiano
Listing
Barneveld
7,096 km
Throughfeed CNC machining centre
Format4creator 950 advanced
Call
Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 175 h, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, overall weight: 2,500 kg, table width: 950 mm, working width: 950 mm, air pressure: 6 bar, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, rotational speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately!
4-sided formatting
12kW main motor HSK 63F
Automatic 4-position tool changer
Pickup station for additional tools
Drilling head DH17
2 alignment stops in X-direction for short/long panels
Foldable tables at front and rear
Software on the machine AND in the office with dedicated license
Redsxmbm Aopfx Akwou
DXF import
Modern, fully-featured CNC machine with low operating hours – immediately available!
Listing
Delhi
915 km
Offset printing press
Man Roland500
Call
Condition: excellent (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 31765 B, color channels: 5, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 744 mm, paper height (max.): 592 mm, counter reading (color): 2,50,00,000, Key Technical Features & Benefits
Maximum Production Speed: Runs up to 18,000 sheets per hour, ensuring you hit even the tightest deadlines.
Substrate Flexibility: Effortlessly handles different gsm materials
It’s a true "all-rounder" for paper and thick cardboard.
Large Transferters: Double-diameter transfer cylinders and impression cylinders ensure "mark-free" printing and a smoother sheet travel path.
Quick Start-Up: Features advanced automation for plate loading and wash-ups, significantly reducing make-ready times and substrate waste.
Pecom Control System: Integrated console for precise remote ink and register control, ensuring color consistency across long runs.
Ergonomic Design: Low-profile construction for easier access and maintenance compared to taller competitors.
Automation: PPL (Power Plate Loading) / Automatic Wash-upInking
Units: 16-roller high-performance inking system
All units are UV Prepared
1 UNIT UV INTERDECK
PLUS END OF PRESS UV
Also has an IR DRYER
Rsdpfjy Ipmvex Akwou
Listing
United Arab Emirates
2,608 km
Chassis cab
Farizon H9E
Call
Condition: new, power: 130 kW (176.75 HP), fuel type: electric, tire size: 215/75 R17.5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: electricity, total length: 7,990 mm, total width: 2,250 mm, total height: 2,360 mm, Year of construction: 2024, Equipment: cruise control, tire pressure monitoring, = Additional options and accessories =
- 360 camera
- Airbag
- Forward collision avoidance system
- Lane Departure Warning System
- Parking sensor
= Remarks =
Cabin type: Day Cab
Country of origin: China
Displacement: 162.28kWh
Torque: 1,500 Nm
Range economy: 352 km
Dimension: 7,995 × 2,245 × 2,355
Cab to end: 6,230 mm
Steering: LH
Construction: Chassis
Gearbox type: Electronic single speed transmission
Seat belt: 3 point
Seat Material: Fabric
Driver Seat: 4 directions adjustment (slide back and forth
fold flat)
Headlight: LED
Infotainment: 12 inch LCD + 360o camera
PTO: ePTO Available
Parking Sensors
360 camera
Tire Pressure Monitoring System
Lane Departure Warning
Front Collision Warning
Advanced Emergency Braking
Door Open Warning
Auto locking
Follow me home
Rodpfsy Tzitox Akwju
= More information =
Tyre size: 215/75 R17.5
Empty weight: 3.910 kg
Carrying capacity: 4.000 kg
GVW: 7.910 kg
Listing
Almaty
2,527 km
Gear hobbing machine
WMW ROMANIAGHM 2500
Call
Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS
GEAR HOBBING MACHINE GHM 2500 CNC
Description of the main components of the GHM 2500 machine
The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns.
The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head.
The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip.
The milling/gearing unit is provided with three translation axes and two rotation axes, as follows:
-X axis: longitudinal/radial movement towards the workpiece axis
-Y axis: vertical movement of the gearing head
-Aza Z: tangential movement of the gearing head
-Axis: inclination +/-45 degrees of the gearing head
-Axis C: rotation of the main axis of the gearing head
The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part.
Redpfx Aoy A Nglskweu
1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head.
The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse.
2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head.
The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse.
3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke.
4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3.
5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3.
6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate.
7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission.
8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3.
9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.
Listing
Zheng Zhou Shi
3,684 km
Crushing equipment
Construction waste recycling plant100-200 t/h sand gravel production plant
Call
Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment
A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output.
General Introduction
The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects.
Capacity range: 30–1000 tons per hour (customizable)
Feed size: ≤800 mm depending on crusher type
Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel)
Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system
Power configuration: Electric or diesel-driven options available
Automation: PLC control with real-time monitoring and adjustable output ratio
MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries.
Rsdpfxeq Nia Ij Akweu
2. Crushing and Screening:
- The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades.
- Crushers break down large rocks into smaller pieces, and screens sort the particles based on size.
3. Washing:
- Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction.
4. Grading and Sorting:
- After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities.
5. Storage and Stockpiling:
- Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials.
6. Conveying and Transportation:
- Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points.
Keywords
Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.
Listing
Doha
2,861 km
Sheet metal processing center
SalvagniniP4x-2516
Call
Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle.
Max. sheet length: 3,048 mm
Max. sheet width: 1,524 mm
Max. bending length: 2,500 mm
Sheet thickness (steel ~410 MPa): 2.5 mm (90°)
Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°)
Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°)
Max. bending angle: +135° / -135°
Max. flange height: 165 mm
Max. diagonal (rotatable sheet): 2,800 mm
Min. sheet thickness: 0.5 mm
Max. pack height (incl. pallet): 350 mm
Max. load capacity: 5,000 kg
Vertical stroke (loading table): 550 mm
Rotation capability: 0°, 90°, 180°, 270°
Automatic loading system with scissor lift table ()
Conveyor–destacker (PCD3015) for automatic feeding
Automatic panel bending center P4X-2516
Upper bending blade (LS1)
Rjdjyr Ackopfx Akwsu
Lower bending blade (LI)
SiX CNC control system
SOLE.P4 production management software
OFFICE.P4 offline programming software
ABA automatic blankholder (automatic length adjustment)
CLA-A asymmetric auxiliary bending system
UC1000-G13 gooseneck tool set
Eroded clamp (for coated / special materials)
PSE automatic cleaning & lubrication system
SAP panel unloader / accumulator
Spare parts kit (approx. €7,000 value)
Listing
南京市
4,160 km
Hydraulic press
Nanjing Asia Machine Mfg. Co., Ltd.YQ32-315 Four-column Hydraulic Press
Call
Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press
This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials.
The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting.
Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop
Redsy Uiyvjpfx Akwou
Mainframe
The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses.
Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts.
The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.
Listing
Zheng Zhou Shi
3,684 km
Crushing equipment
Henan Mingyuan HSI Impact crusherStone crushing plant for sand aggregate
Call
Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing
Introduction
An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials.
Features of HSI Impact Crusher
High Crushing Efficiency
The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results.
Versatile Applications
Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal.
Adjustable Output Size
Hydraulic or mechanical adjustment systems allow easy control of product size.
Durable Components
Wear-resistant blow bars and liners extend service life and reduce maintenance costs.
Easy Maintenance
Quick access doors and modular design simplify inspection and part replacement.
Energy Efficiency
Optimized rotor design and balanced operation minimize energy consumption.
Rsdpfeq Ny Sasx Akwou
Technical Specifications (Typical Range)
Model:1214 Max input size: 300 mm, Capacity: 100-140 t/h
Model:1315 Max input size: 350mm Capacity: 150-200 t/h
Specifications may vary depending on material hardness and feed size.
Applications
Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials.
Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production.
Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete.
Recycling: Effective for crushing concrete, asphalt, and demolition waste.
Why Choose a Reliable Impact Crusher Manufacturer
Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability.
Impact Crusher for Sale
Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups.
Conclusion
An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.
Listing
Fevziçakmak
4,844 km
Sheet metal deburring machine
TFONSurfacer® TF-RBC 3013 PLUS
Call
Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System:
Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications.
-Material Compatibility:
-Mild Steel, Aluminum, Stainless Steel.
Rsdpfx Akji E Tkaeweu
-Working Thickness Range:
-0 – 120 mm
Edge Rounding:
Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality
Precision Control:
Integrated Siemens automation system delivers accurate, consistent control throughout processing.
Independent Processing Stations:
Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations.
Table Size Options:
Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements
Table Types:
Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes.
Plasma & Oxygen Technology:
Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces.
Surface Purification:
Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating
Edge Rounding for Coating:
Produces uniform, defect-free edges ideal for painting and coating applications.
Industry Applications:
Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use.
Uniform Edge Results:
8 flap wheels work together to deliver consistent radius edges on every part.
Pneumatic Oscillation System:
Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation.
Engineered for industrial precision. Built for durability. Designed for versatile applications.
TFON – Excellence in Edge Processing and Surface Preparation.
Listing
Fevziçakmak
4,844 km
Sheet Metal Straightener / Leveler
TFON MACHINE CO.Leveling Machine - TF-S 3513
Call
Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine.
-The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results.
-Key Specifications:
Material Thickness: 0 – 0.3 mm.
-Maximum Material Width: 1.300 mm
Minimum Material Length: 70 mm
Quick Change System for Straightening Rollers: Standard.
Rjdpfx Aokyrzlokwou
Flattening Gap Adjustment: Electromechanical / PC Controlled.
Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm.
Total Weight: 5.000 kg.
Listing
Fevziçakmak
4,844 km
Sheet Metal Straightener / Leveler
TFON MACHINE CO.Leveling Machine - TF-XS Series
Call
Condition: new, Year of construction: 2026, -TFON Leveltech® XS-3520 Leveling Machine.
Rjdpfsityvfsx Akweu
-The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety..
-Key Specifications:
Material Thickness: 0.3 mm – 5.0 mm.
Maximum Material Width: 200 mm.
Minimum Material Length: 70 mm
Flattening Gap Adjustment: Electromechanical / PLC Controlled.
Overload Protection: Standard.
Control Interface: Touchscreen HMI
Machine Weight: 2,000 kg.
Machine Dimensions: (L × W × H): 2,225 × 1,595 × 1,850 mm
Listing
Fevziçakmak
4,844 km
Sheet metal deburring machine
TFONSurfacer® TF-RBC 3013
Call
Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Purification System
-Material Compatibility.
Mild Steel, Aluminum, and Stainless Steel
-Working Thickness Range:
Accommodates material thicknesses from 0 to 120 mm.
-Edge Rounding
Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece.
-Precision Control:
Equipped with a Siemens automation system for accurate and consistent control throughout the entire process.
Independent Stations:
Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially.
Table Options:
Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements.
Table Types:
Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes.
Plasma and Oxygen Technology:
Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces.
Surface Purification:
Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing.
Edge Rounding for Coating:
Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface.
Industry Applications:
Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications.
Redpfx Akshq A T Uewou
Uniform Results:
Six flap wheels operate in unison to provide consistent, equal radius edges on every part.
Pneumatic Oscillation System:
Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.
Listing
Fevziçakmak
4,844 km
Sheet metal deburring machine
TFONSurfacer® TF-RBF 2510
Call
Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System.
Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs.
-Material Compatibility:
Suitable for aluminium, stainless steel, and mild steel applications.
-Wide Thickness Range:
Efficiently processes materials from 0 to 120 mm thick
-Finishing Excellence:
Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality.
Industrial Versatility:
Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries.
Edge Rounding Precision:
Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance
Advanced Automation:
Integrated Siemens control system ensures enhanced precision and operational reliability
Independent Processing Stations:
Enable flexible, efficient multi-stage processing tailored to complex workflows.
Multiple Table Width Options:
Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements.
Customisable Conveyor Options:
Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling.
Rodpfx Akjhq Dbmowju
Surface Cleaning:
Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing.
Improved Operator Safety:
Edge rounding station minimizes risks of cuts and injuries from sharp edges.
High-Performance Finishing:
Equipped with Scotch abrasive technology to deliver smooth, even finishes.
Extended Abrasive Life:
Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime.
Consistent Radius Output:
Six flap wheels ensure uniform edge radii on every part for consistent quality.
Engineered for performance. Designed for safety. Built for industrial versatility.
TFON – Surface perfection, every time
Listing
Fevziçakmak
4,844 km
Sheet metal deburring machine
TFONSurfacer® TF-RB 2510
Call
Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System.
-Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs.
-Material Compatibility:
Suitable for aluminium, stainless steel, and mild steel applications.
-Wide Thickness Range:
Efficiently processes materials from 0 to 120 mm thick.
-Finishing Excellence:
Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality.
Industrial Versatility:
Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries.
Edge Rounding Precision:
Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance.
Advanced Automation:
Integrated Siemens control system ensures enhanced precision and operational reliability.
Independent Processing Stations:
Enable flexible, efficient multi-stage processing tailored to complex workflows.
Multiple Table Width Options:
Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements.
Customisable Conveyor Options:
Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling.
Surface Cleaning:
Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing.
Rodpfxjhq A Txo Akweu
Improved Operator Safety:
Edge rounding station minimizes risks of cuts and injuries from sharp edges.
High-Performance Finishing:
Equipped with Scotch abrasive technology to deliver smooth, even finishes.
Extended Abrasive Life:
Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime.
Consistent Radius Output :
Six flap wheels ensure uniform edge radii on every part for consistent quality.
Engineered for performance. Designed for safety. Built for industrial versatility.
TFON – Surface perfection, every time.
Listing
Fevziçakmak
4,844 km
Sheet Metal Straightener / Leveler
TFON MACHINE CO.Leveling Machine - TF-M 5516
Call
Condition: new, Year of construction: 2026, -Tfon Leveltech® TF M-5516 Leveling Machine
Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use.
Key Specifications:
Rsdjkyrqfopfx Akwsu
-Material Thickness: 1 – 15 mm.
-Maximum Material Width: 1,600 mm
Minimum Material Length: 110 mm
Quick Change System for Straightening Rollers: Standard
Flattening Gap Adjustment: Servo Hydraulic / PC Controlled.
Overload Protection: Standard
Control Screen: Touchscreen
Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm
Total Weight: 19.000 kg
Listing
Fevziçakmak
4,844 km
Beveling machine
GERIMALGA 1600 TYPE-1
Call
Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA
Rsdpfjtmrkrjx Akweu
- The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries.
-Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.
Trust Seal
Dealers certified through Machineseeker

Listing
Fevziçakmak
4,844 km
Sheet metal beveling machine
TFON Bevel Wizard®️ Bevelling MachineTFON Bevel Wizard®️ TF - C 8010
Call
Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear.
-Precision Beveling for Linear & Non-Linear Applications.
Rsdpfert Tpnex Akwsu
-The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts.
-Key Features
🔹 Advanced Trace Tracking System:
Intelligently detects and adapts to diverse edge shapes and contours in real time.
🔹 Wide Beveling Range:
Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications.
- Optimized for Large Workpieces:
Capable of processing materials up to 12,000 mm in length and 100 mm in thickness.
- Industrial-Grade Durability:
Built to last with a solid 10,000 kg frame for long-term reliability.
🔹 Superior Surface Finish:
Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel.
-Technical Specifications:
Beveling Angle Range: -30° to +80°
-Material Thickness: 4 – 100 mm.
-Minimum Material Width: 250 mm.
Minimum Material Length: 250 mm
Maximum Material Length: 12,000 mm
Part Feed Speed: 1.5 – 5 m/min
Part Completion Speed: 3 meters/day
Maximum Part Indentation: Ø400 mm
Emery Band Rotation Speed: 30 m/min
Contact Wheel Diameter: Ø135 mm.
Emery Band Drum Diameter: Ø400 mm.
Machine Weight: 10,000 kg
Engineered for precision. Built for performance. Designed for industrial excellence
Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...
Listing
Fevziçakmak
4,844 km
Sheet Metal Straightener / Leveler
TFON MACHINE CO.Leveling Machine - TF-S Series
Call
Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series
Models: S-3560, S-3511, S-3513, S-3516
-Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation.
-Material Thickness: 0.3 mm – 5.0 mm.
Maximum Material Width.
Rodpfehwb Utex Akweu
-S-3560: 600 mm
-S-3511: 1.100 mm.
S-3513: 1,300 mm
S-3516: (width not specified)
Minimum Material Length: 70 mm.
Flattening Gap Adjustment: Electromechanical / PLC Controlled
Overload Protection: Standard.
Control Screen: Touchscreen
Machine Weight:
S-3560: 5.000 kg
S-3511: 10.000 kg
S-3513: 14.000 kg
Machine Dimensions (L × W × H):
S-3560: 1,985 × 1,585 × 1,820 mm
S-3511: 2,485 × 1,585 × 1,820 mm
S-3513: 2,695 × 1,585 × 1,820 mm.
Listing
Zheng Zhou Shi
3,684 km
Crushing equipment
Symons cone crusher/mobile crusherSpring cone crusher PYB900, PYD900
Call
Condition: new, Year of construction: 2026, Cone Crusher: Types, Features, and Applications
Cone crushers are essential equipment in the mining, construction, and aggregate industries. They are designed to crush hard and medium-hard materials such as granite, basalt, iron ore, and limestone into smaller, uniform sizes. This article explores the different types of cone crushers, including spring cone crushers, compound cone crushers, and Symons cone crushers, and provides insights into choosing the right cone crusher for sale.
Redsq Nd Ndopfx Akwju
What Is a Cone Crusher?
A cone crusher is a compression-type machine that reduces material size by squeezing it between a moving piece of steel (the mantle) and a stationary piece (the concave). The material is crushed as it moves downward through the chamber, achieving fine and uniform output. Cone crushers are widely used in secondary, tertiary, and fine crushing stages.
Spring Cone Crusher
The spring cone crusher is one of the earliest and most traditional types of cone crushers. It uses a spring system to protect the crusher from damage when uncrushable materials enter the chamber. Key features include:
Reliable structure and low maintenance
Adjustable discharge size for different crushing requirements
Overload protection through the spring safety system
Suitable for medium and fine crushing of various ores and rocks
Spring cone crushers are ideal for small to medium-scale operations that require stable performance and cost efficiency.
Compound Cone Crusher
The compound cone crusher, also known as the combination cone crusher, integrates the advantages of both spring and hydraulic cone crushers. It features a robust design and high crushing efficiency. Main characteristics include:
High crushing ratio and uniform product size
Hydraulic cleaning system for easy maintenance
Strong adaptability to different materials and production conditions
Energy-efficient operation
This type of cone crusher is widely used in mining, metallurgy, construction, and chemical industries, offering a balance between performance and affordability.
Symons Cone Crusher
The Symons cone crusher is a classic model that has been used for decades in the mining and aggregate industries. It is known for its simple structure, reliable performance, and high productivity. Key advantages include:
Stable operation and long service life
Uniform particle size distribution
Easy adjustment of the discharge opening
Low operating cost
Symons cone crushers are available in several models, including 3ft, 4ft, 4¼ft, 5½ft, and 7ft, to meet different capacity requirements.
Cone Crusher for Sale
When selecting a cone crusher for sale, several factors should be considered:
Material hardness and abrasiveness – Choose a crusher designed for the specific material type.
Production capacity – Match the crusher size and power to the required output.
Automation and control systems – Modern cone crushers offer hydraulic and PLC systems for easier operation.
After-sales service and spare parts availability – Reliable support ensures long-term performance.
Henan Mingyuan Heavy Industrial Equipment Co., LTD offers a wide range of cone crushers, including spring, compound, and Symons models. Each machine is built with high-quality materials and advanced technology to ensure efficient and durable performance.
Listing
Vilnius
5,861 km
Standard tractor unit
VOLVOFH 500 Globetrotter XL I-ParkCool ACC
Call
Condition: used, functionality: fully functional, mileage: 2,21,391 km, power: 368 kW (500.34 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features
Cabin type: Globetrotter XL
Volvo FH 500
Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save
Volvo Engine Brake - Retardation D13K-375kW/D16-500kW
I-shift Automated 12-speed - GCW 60 tonne
NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR
Battery 2 x 210 Ah - AGM Absorbent Glass-fibre Material type
Euro VI SCR, EGR and particulate filter
Rear view camera: Without
Driver comfort
Seats: regular
Beds: regular
Rjdpfx Akezap Dkoweu
I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor
Parking heater (Webasto): 1.8kW Air to air
33 litre under bunk mounted fridge / freezer with dividers
Electrically controlled air conditioning with sun sensor
Driver attention support: NO
Side Collision Avoidance Support, passenger and driver side
Interior sun visor - Driver-side
Technical specifications
Wheelbase: 3800 mm
Fifth wheel height: 160mm leg-height
Front axle load: 7.5 tonne
Retarder: NO
ACC - Adaptive cruise control: YES
I-See Predictive Cruise Control with lower operating settings - Map based topography information
ADR: Without
Full air cab: Without
Drive Axle ratio: 2.31:1
Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023
Forward collision warning with AEBS advanced emergency brake system
Fuel tanks capacity (left, right): 450L fuel tank - right hand side, 650 LITRE, LEFT SIDE FUEL TANK
Ad blue tank capacity: 90 litre for 710mm diameter fuel tanks
Additional roof lights: Without
Tyres Front tyre 385/65R22.5, Drive axle tyre 315/70R22.5
Technology
Infotainment System
GSM/GPRS/4G modem, LTE & WLAN
Exterior
Mirror cameras: NO
Headlights: Halogen H7
Roof lights: without
Side Skirts: Without
Deflectors: Roof air deflector
Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor
We make it easier for you to find: "canon imagerunner advance"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
























































































































































































