Temperature Control Unit/ Chiller
Single Temperiertechnik GmbH Chill Advanced C-25-L

Name: Single Temperiertechnik GmbH Chill Advanced C-25-L
Brand: Single Temperiertechnik GmbH
Availability: InStock

Condition

New

Location

Hochdorf

Temperature Control Unit/ Chiller Single Temperiertechnik GmbH Chill Advanced C-25-L

Single Temperiertechnik GmbH Chill Advanced C-25-L

Show map

Machine data

Machine type:: Temperature Control Unit/ Chiller

Manufacturer:: Single Temperiertechnik GmbH

Model:: Chill Advanced C-25-L

Condition:: new

Price & Location

Location:: Ostring 17-19, 73269 Hochdorf, Deutschland

Rental:: is possible

Call

Details about the offer

Listing ID:: A6048334

Reference number:: Chill Advanced C-25-L

Update:: 21.11.2024

Description

*Technical specification:
-air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C.
-temperature range flow: +5°C to +30°C
(optionally lower temperatures down to -5°C possible)
-air flow rate: 8,000 m³/h
-max. air inlet temperature: +30°C
-Optionally with heating capacity up to 24kW

*Pumps:
-Delivery capacity up to 150 ltr/ min.
-Delivery pressure up to max. 4 or 7 bar
-Motor output 1.1 or 2.2 kW

*Dimensions:
-L/W/H: 1,450 mm x 750 mm x 1,680 mm
-empty weight: approx. 480 kg
-Circulation medium connection: DN 32 IG

*Details & Highlights:
-Internal refrigerant: R 123 a
-Power supply: 380-425V/ 50Hz

-Regulation and control unit SBC-T
-Setpoint and actual value display, alarm display
-Fully hermetic reciprocating compressor
-Refrigerant receiver with safety valve according to DIN EN 378
-capacity control
-frost protection monitoring
-Flow monitoring
-grid cover over condenser
-oil sump heater
-drainage device
-Level monitoring by magnetic float switch
-installed dirt trap in the return line in the circulating medium
-overflow valve between flow and return as pump protection, fixed setting
-high and low pressure limiter according to DIN EN 378
Gtjdpfog Ewwrox Ah Het
-stainless steel tank, capacity: 80 litres, open system completely insulated
Self-supporting housing with castors, mobile
-system for indoor installation
-control box IP 54

Other performance classes are available on request. Visit our homepage for further details.

*This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Seller

Registered since: 2020

8 listings online

Call

Send inquiry

Telephone & Fax

+49 170 6... show

These listings may also fit your interest.

Listing

Vibratory finishing system ERBA Turbo 60 Fliehkraftanlage

Wesel

7,030 km

Vibratory finishing system
ERBATurbo 60 Fliehkraftanlage

Call

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box Gsdpfx Ahsn Ut Ilo Hjtt All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

See details

Listing

Güglingen

6,856 km

5 KW chiller, cooler IKG
HitemaENR 005

€4,370

fixed price plus VAT

Call

Year of construction: 2022, condition: as good as new (ex-display), 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Technical data on request . The machine is available from stock in Güglingen. We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . In addition, we partly take refrigeration systems in payment or buy them. Gtsdpfjfqlllox Ah Hot

See details

Listing

Multisensor CMM with guarantee Mahr MS2VT Refurbished mit Garantie

Saarbrücken

7,008 km

Multisensor CMM with guarantee
MahrMS2VT Refurbished mit Garantie

Call

Condition: reconditioned (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, 3D coordinate measuring machine Mahr MS2VT used multi-sensor CMM with motor zoom and active vibration damping Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2022. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs • Measuring range single sensor: 200x200x200mm • Dimensions: 900x750x950mm Bcym337udm • Weight: about 170kg Gtedpfjdz Er Rox Ah Hot • Accuracy: E2 = 2.4 + L/150 [?m] • Refurbished 2024 • incl. USB camera with fixed focal length • incl. LED ring light • including calibration standard • incl. 2-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 evaluation software (12 months free SW update) Manufacturer's icon image (sister device)

See details

Listing

Vacuum pump 1000m / h Busch R5 RC 1000 B

Borken

7,016 km

Vacuum pump 1000m / h
BuschR5 RC 1000 B

Call

Listing

Bacău

5,499 km

Production line for wafers and biscuits

€4,30,000

ONO plus VAT

Call

Year of construction: 2006, condition: like new (used), The wafer and biscuit factory that benefits from a continuous, fully automated production process and has two main lines: wafers and biscuits. The wafer line has a capacity of 35-40 kg/h with a wafer weight of 45-55g and obtaining three quality types: 1. wafer weight = 45g/pc, cream layer = 1.25:1 – capacity –2.77 t/24h 2. wafer weight = 45g/pc, cream layer = 1.35:1 – capacity –2.89 t/24h 3. wafer weight = 45g/pc, cream layer = 1.50:1 – capacity –3.05 t/24h The line is equipped with a packaging machine and the collection and reuse of the scraps resulting from the cutting process is done automatically. The biscuit line has a capacity of 300 - 500 kg/h and three qualitative types can be obtained: 1. simple 2. sandwich 3. caramel Gjdpfx Aol Siv Seh Hott 4. cocoa 5. glaze Simple biscuits can be: Strength = 300-400kg/h Soft = 400-500kg/h Crisps = 350-500kg/h The production is continuous, automatic, the line being equipped with a caramelizing device, sandwich, with 30 sets of shapes, chocolate coating device, including packaging and 5 temperature zones with independent, automatic temperature control.

See details

Listing

Used Mono Progressing Cavity Pump Seepex BN10 / 1,5 -12 m3h

Sinsheim

6,863 km

Used Mono Progressing Cavity Pump
SeepexBN10 / 1,5 -12 m3h

Call

Year of construction: 1999, condition: used, Name: Eccentric Screw Pump Manufacturer: Seepex Type: BN10 Year built: 1999 Material: mild steel Driving force: 9,2 kW Gtjdpoh Tkafofx Ah Hjt Max. operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg Speed: 75 -430 rpm Flow rate: 1,5 -12 m3H Operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Type of protection: 55 Flanges: DN 80 / 100 Condition: Used Technical documentation: no Price: on request

See details

Listing

Sevenum

7,067 km

Tray loader
Breda PackagingUnipack T

Call

Listing

Weilerswist

7,013 km

Warehouse lift
KardexXP 250 C3000

Call

Listing

Noris- Extruder MINI 20/25 D noris plastic GmbH & Co. KG MINI 20/25 D

Altdorf bei Nürnberg

6,687 km

Noris- Extruder MINI 20/25 D
noris plastic GmbH & Co. KGMINI 20/25 D

€30,900

fixed price plus VAT

Call

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Gtedpfshx Elfox Ah Hot Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

See details

Listing

10,000 PCs Einlegegitter gratings 10.000 Stück Einlegegitter Gitterroste für Palettenregale verzinkt

Aumühle

6,485 km

10,000 PCs Einlegegitter gratings
10.000 Stück Einlegegitter Gitterrostefür Palettenregale verzinkt

€15

ONO plus VAT

Call

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas Gtjdpfx Asdhhukoh Het clean-swept premises Liquidations Quick

See details

Advertise here