Used Casadei Matrix 4+1 for sale (1,01,239)

Condition: ready for operation (used), Year of construction: 1998, A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Gisdpjyfv N Dofx Anyew

Condition: new, Year of construction: 2020, A new high-pressure pump from Andritz Ritz GmbH is offered. Gsdpfx Anevu T A Nsyjiw Year of manufacture 2020. Technical details: see nameplate.

Condition: used, Used 4-in-1 bucket from a Liebherr LR634 crawler loader. Transport dimensions / weight: 255 x 165 x 190 cm - 2.30 t. Giodpfx Anjw T Rkloyjw

Condition: used, machine/vehicle number: Prüfstand Antrieb, performance 110 KW tension 400 V speed 1,500 to 5,000 rpm adjustable motor with - frequency converter Giodpfxsdfm Nrs Anyow - incremental encoder, line choke, network filter - external fan emergency stop device manual control unit *frequency converter:* type: VCD 4 S 160A AZ/NS serial number: BKQ4S160AN20A-1 output: 207 KVA motor performance up to 160 KW total weight approx. 1,000 kg

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. Gijdpfx Ansuh Rzqoyew We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! also available as Craneset Gsdpfx Aoq R N Tqonyjiw

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Gijdeq R Rf Aopfx Anyow

Year of construction: 2011, operating hours: 400 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, i=61 used, good condition, complete with top block and bottom block, without electrics, DMF, without chassis, for mounting on EZ or as foot hoist Engine ZBR132 C4 Gjdpfxsrbznnj Anysiw

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with top block, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Fine input gearbox F10 Gsdeq R N T Aepfx Anyeiw Acid protection coating Various accessories on request

Condition: reconditioned (used), Year of construction: 2003, Manufacturer: STAHL CraneSystems Type: SH6063-12 4/1 L3 Year of manufacture: 2003 Load capacity appr.: 25,000 kg Hook path appr.: 10,000 mm Track width appr.: 2,800 mm Drive unit group: FEM/ISO 1Am/M4 Working speeds: Hoist appr.: 0.5/3.1 m/min Gedpekn Snrofx Anysiw Cross travel appr.: 1.0/20.0 m/min Certification of the remaining useful life of approx. 80% by an inspection expert. Equipped with: - with hook block - two lifting speeds - trolley with drive

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Gsdskqm Aispfx Anysiw Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley

Condition: reconditioned (used), Year of construction: 2004, Brand: DEMAG Type: DH1063 H24 4/1 FG10 Year of construction: 2004 Load-capacity appr.: 25.000 kg Giodpfx Ansgiyf Aeyow Hook-Path appr.: 12.000 mm Load-classification: FEM/ISO 1Bm/M3 Working-speeds: Hoist appr. 6,3/0,6 m/min Certification of the remaining useful life of appr. 80% by an inspection expert. Equipped with: - Rope - Fine stroke FG10

Condition: new, The Instrument Reprocessing Revolution Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – compelling advantages for your practice! Why use four separate instrument reprocessing products when you can have everything in one? With Careclave, you'll save significantly more time, money, and space in your dental practice from day one compared to conventional device combinations: €6,000.00 less in service costs: Because fewer devices mean lower costs. Careclave is not only more affordable to purchase, but it also saves you the extra maintenance and validation costs for additional devices. 45% more space in the reprocessing room: Your practice team knows that workspace in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device. 33% more transfer instruments per cycle: Careclave is a real speed demon. Reprocessing eight hollow instruments in just 16–18 minutes guarantees rapid reuse and thus reduces the need for additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in a single device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to eight handpieces, prophylaxis handpieces, or ultrasonic scaler tips in just 16 minutes. 2. Maintenance Careclave gently and quickly maintains the handpieces in the Carebox. With the world's first integrated ADDcare maintenance station, the crucial chuck maintenance is also performed directly at the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-jacket technology, the Careclave offers everything you would expect from a modern autoclave – and more: Sterilize up to 11 kg of instruments on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber design, reprocessing and maintaining instruments in the Carebox, as well as simultaneously sterilizing other instruments on short trays, is possible in a single cycle. 4. Documentation and Release With ProControl, you can provide proof of flawless instrument reprocessing quickly, securely, and paperlessly. Documentation and release are performed directly on the Careclave® display without the need for additional software. For seamless traceability, the reprocessing protocols are saved to the MELAG USB stick or on the practice network. 4. Documentation and Release Model: Careclave 618 Gsdoyk Eqbjpfx Anyjiw Dimensions (D x W x H): 65.3 cm x 48 cm x 56.2 cm Fits a 60 cm tabletop Internal dimensions: Ø 25 cm x 35 cm Area of ​​application: Dental Power supply: 220–240 V, 50 Hz Power consumption: 3 kW Compressed air connection: 4–8 bar Validability: Validatable Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying system Color: White Weight: 69 kg MSRP €21,509.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Gsdpegf Sw Njfx Anyjiw Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Gsdpjcr S Ecsfx Anyeiw Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Godpfxexy Tlws Anyeiw

Condition: new, Year of construction: 2018, I sell the edge banding machine Casadei ALA 10. Gijdpfszkb N Esx Anyew Suitable for curved shaped edges Condition new, possible to test !

Condition: excellent (used), Professional paper drilling machine from the renowned German manufacturer Constantin Hang Maschinenfabrik Göppingen. Model 114-4 is equipped with four drilling heads designed for precise drilling of paper, documents, catalogs, calendars, and print materials. The machine is suitable for use in: • printing houses, Godpfsy Nm A Rox Anyoiw • bookbinding shops, • print production facilities, • binder and catalog manufacturing, • technical documentation preparation. Robust German engineering guarantees high working precision and long-term durability. Technical specifications: • Manufacturer: Constantin Hang Maschinenfabrik • Model: 114-4 • Number of heads: 4 • Adjustable head distance • Adjustable worktable • Foot pedal operation • Safety guard • Made in Germany

Condition: new, Professional industrial worm gearbox from the renowned manufacturer AUMA. The device is factory-new, stored, and in excellent technical and visual condition. Robust and heavy-duty construction, designed for use in industrial installations, fittings, valves, dampers, and heavy drive systems. Technical data: * Manufacturer: AUMA * Type: GF 125.3 * Version: RR Giedpfx Anoy Sitweyjw * Gear ratio: i = 208:1 * Input torque: 53 Nm * Output torque: 4000 Nm * Protection rating: IP67 * Operating temperature range: -25°C to +80°C * Lubrication: F1 * Shaft with keyway * Heavy-duty industrial housing Applications: * Actuators for valves and dampers * Industrial installations * Power industry * Water supply and wastewater treatment plants * Industrial automation * Pipeline systems Condition: new, from stock. Price applies to 1 unit.

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm Giedpsy Skm Eefx Anyew • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • Industrial automation • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.

Condition: used, Year of construction: 2003, Working width: 510 mm Cutterhead: strip knives Number of knives: 4 Planer table length: 2000 mm Gedpfx Ansxgn N Rjysiw Tiltable planer fence: yes Planer tables fold-up: manual Maximum thicknesser pass height: 230 mm Thickness table height adjustment: electric Planing thickness display: digital readout Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: yes Motor power: 5.5 kW Motor brake: yes Extraction connection: 160 mm Machine length: 2200 mm Machine width: 950 mm Weight: 800 kg

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: Gsdjy Ih Rgspfx Anyeiw X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand Gsdpfx Anox Hllxoyoiw - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Year of construction: 2017, condition: as good as new (ex-display), Technical data: - Maximum dimensions (W x H) of finished part: 180 x 105 mm - Minimum working width: 23 mm - Minimum working height: 6 mm - Minimum length of individual workpieces: 300 mm - Feed rate: 6 - 12 m/min - Spindle speed: 6,000 rpm - Spindle diameter: 35 mm - Usable length of horizontal spindle: 190 mm - Usable length of vertical spindle: 120 mm - Adjustment range for feed table and infeed guide: 10 mm - Tool diameter of horizontal spindle: 100 mm - Minimum/maximum tool diameter of vertical spindle: 100/124 mm - Profiling capability of vertical spindle: 12 mm Godpfx Asii Rxgjnyjiw - Adjustment range for the tool heads: +/- 1 mm - Motor power of horizontal spindle: 7.5 kW - Motor power of vertical spindle: 7.5 kW - Motor power of feed: 0.75 / 1.1 kW - Connection voltage: 400 V - Phase(s): 3 - Mains frequency: 50 Hz - Length of material feed table: 2300 mm - Diameter of feed rollers - Diameter of extraction hoods: 1 x 150 mm, 2 x 120 mm

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW Gjdozcu Tvopfx Anysiw - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)