Used Case Other for sale (22,708)

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle Gbodpfx Aaeydh Agotot transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Gsdpsztar Rjfx Aatobt Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. Gbodpfx Aozhtpfeatet The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. An inspection of the machine is possible at any time; it is currently still in production.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Gjdpfx Aaszz Ax Astobt

Year of construction: 2022, condition: used, Serial number: l2100128 Functions: Mixing, grinding, emulsification, vacuum deaeration, direct and indirect heating, cooling. Rotating knives + counter-rotating scraper arm, with specific tank geometry for optimal product processing Technical specifications: Production capacity: 80 to 1,020 liters/hour Capacity: 246 L Temperature: -10/127°C Adjustable rotation speed from 300 rpm to 3,000 rpm Discharge via valve or by electrically tilting the tank 90° With diaphragm circulation pump Gbedpfjzz Iuvex Aatet Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Gbsdpfxezz Hn Ie Aatjt Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Godpfotmup Usx Aatjbt Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Gbsdpozwt T Asfx Aatet Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Gedpfx Aasn Nv Sdjtsbt

Condition: like new (used), functionality: fully functional, mileage: 5,52,666 km, first registration: 01/2023, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air, Equipment: ABS, Bluetooth, airbag, navigation system, onboard computer, SCANIA 590 S - Registration: 01/2023 - Mileage: 552,666 km - Full air suspension - Retarder - Stationary air conditioning - Navigation system Gbjdpfx Asy Ey E Deatot - LED headlights POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING SOLUTIONS ON SITE. AVAILABLE FROM 24 UP TO A MAXIMUM OF 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM–7:00 PM | SATURDAY 8:30 AM–2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 – S 500 – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Tipper Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Body – Crane – Tipper – 4 Axles – Rear 4 Axles – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Tail Lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility regarding discrepancies in technical specifications, options, and features, which in some cases may differ from those indicated in this description. We kindly invite you to verify the characteristics of the specific vehicle.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display Gbodpfjzdtflox Aatot The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2017, overall weight: 140 kg, terms of delivery: FCA Pegnitz delivery time: on request Gbjdpfezz Axcex Aatot terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 9,115 h, lifting height: 4,260 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, fork width: 980 mm, total height: 2,710 mm, total length: 2,260 mm, total width: 1,200 mm, color: grey, Empty weight: 4.683 kg Lifting capacity: 2.500 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516043010729 - Operating hours: 9115 - Lifting capacity: 2500kg - Lifting height: 4260mm - Overhead clearance: 2700mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 980mm - Minimum fork width: 290mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Half cabin - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 4 PzsH620 - └ Capacity: 620Ah - └ Battery voltage: 80V - └ Battery test result: 59% Gsdpfozrmi Hex Aatebt - Transport dimensions: 2262mm x 1200mm x 2710mm (l x w x h) - Transport weight [kg]: 4683kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, - Range: 1100 Series - Dimensions: 1422 x 991 x 1067 mm - Temperature: 121 to 302°C - Belt width: 45.7 cm - Belt length: 1.422 m - Cooking time: 1–30 minutes - 4.3'' color display with 8 preset recipes - Stackable up to 3 ovens Loy Tew El Dxodxugsrr - On wheeled stand - Voltage: 230V - Power: 12 kW - Stand for oven: €1,744 excl. VAT Conveyor Oven Installation Conveyor oven delivered pre-assembled The following are not included in the installation costs: - Chimney connection. - Electrical and gas connections over one meter, as well as connection accessories (power cable and gas hose) - Rental of handling equipment, if necessary (in case of heavy load or other specific requirements). ATTENTION: The flat rate is valid for 1 day. In case of complications related to the client’s premises, access, or other factors, additional fees of €900 per day will apply (€900 excl. VAT). Gjdpfx Aow El Dxeatobt - Stainless steel version: top, front, and sides - Digital service - With front door for adding products - Fully removable front panel for quick and easy cleaning - Conveyor belt direction is reversible

Year of construction: 2004, condition: good (used), Golf car CLUBCAR PRECEDENT, 2-seater golf cart, 2004, with charger, blue. A video can be sent via WhatsApp. We have a continuous supply; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Gbedozz Sbgjpfx Aatst Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, machine/vehicle number: 1383A, mileage: 152 km, power: 127 kW (172.67 HP), first registration: 07/1993, fuel type: diesel, overall weight: 9,716 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, trailer coupling, TUV is NEW!!! truck registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M109A4 is equipped with: Tire pressure regulation system, with which the tire pressure can be changed while driving (ideal for soft terrain, sand, mud.....), four-wheel drive, 6 cylinder Caterpillar diesel engine with turbo and 6598cm? displacement (Pump-Duse without electronics), 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering, air-assisted brakes, 3 front seats, cab has a soft-top and can be driven open, the body has the dimensions L/W/He L/W/H 3660 / 2290 / 1950mm inside, airing, electrical installation with sockets, interior lighting, trunk door at the rear, 3 windows on each side, the km indication are miles, there are several M109 in stock with a speedometer reading of 79 miles to 2155 miles, year of construction 1989 to 1993, driving license class 2 (truck) Perhaps with a little slimming down to 7.49T, tire size 14.5R20 (very good).e 14.5R20(very good condition) Tubeless , Highest speed 90 km / h , 24Volt power supply , The M109A4 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Gedpfjqx Sxdjx Aatsbt

Condition: used, functionality: fully functional, mileage: 4,64,304 km, first registration: 10/2020, fuel type: diesel, fuel: diesel, brakes: retarder, color: red, gearing type: automatic, Equipment: ABS, airbag, Mercedes-Benz ACTROS 1851 - First registered: 10/2020 - Retarder - 464,304 km - Stationary air conditioning - Dual fuel tank - Tyres at 50% FINANCING OR CUSTOMIZED LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, INCLUDING ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 Godpfx Aoyfh Ncoatebt DEALERSHIP OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 Domenico Truck srl declines any responsibility for possible discrepancies in technical specifications, optional features and characteristics which might in some cases differ from those stated in this description. We invite you to verify the features of the specific vehicle.

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Gbsdpfx Aszmqncoatot Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080?

Condition: used, functionality: fully functional, mileage: 2,70,165 km, first registration: 02/2018, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, airbag, Mercedes-Benz Sprinter 319 CDI First registration: 02/2018 Mileage: 270,165 km Dimensions: 4.30 x 1.75 x 2.00 m Gbsdpfx Aasyhhp Ustjt OPTION FOR PERSONALISED FINANCING OR LEASING AVAILABLE ON SITE. From 24 up to a maximum of 96 monthly installments, also available with zero down payment. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL - NAPLES BRANCH DOMENICO ESPOSITO S.P.A. - EBOLI (SA) BRANCH - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 Domenico Truck srl accepts no responsibility for any discrepancies regarding the technical specifications, options, or features that may, in some cases, differ from those stated in the description. Please verify the characteristics of the specific vehicle.

Condition: used, machine/vehicle number: 672, mileage: 15,455 km, power: 85 kW (115.57 HP), first registration: 07/1996, fuel type: gasoline, empty load weight: 2,680 kg, overall weight: 3,000 kg, axle configuration: 4x4, color: green, gearing type: automatic, suspension: other, operation weight: 6,000 kg, Equipment: air conditioning, all wheel drive, differential lock, parking heater, trailer coupling, TÜV and AU are made new with truck registration, the Puch in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition, it is the best Puch I have ever seen, almost like new! The Puch Spezial is equipped with: Air conditioning and auxiliary heating, all-wheel drive, rear differential lock, side flap ideal for hunters as a lockable gun cabinet, 2 front seats and 2 rear seats which are not registered because there is no window at the rear, high off-road capability for extremely difficult terrain. - Tire size 205R16, Mercedes automatic transmission 4 gears, total weight is 3000 kg, displacement 2296cm? , 24Volt power supply. Gsdpfxjqx Sz Se Aatjbt There are several Puch Spezial in stock with an original mileage of 15000 to 25000 km. All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible. Gbsdpoppddyjfx Aatjt

Condition: used, This listing is for a APC SURT1000XLI Smart-UPS. The unit is in full working condition and is ready for immediate release. The APC SURT1000XLI Smart-UPS is an advanced uninterruptible power supply (UPS) designed to safeguard your critical electronic devices from power outages and voltage fluctuations. Engineered for reliability and efficiency, this UPS ensures that your systems remain operational during unexpected power interruptions, providing peace of mind for both home and office environments. Key Features: Gjdpfoxxyddox Aatobt Reliable Battery Protection: Equipped with the RBC31 battery, the SURT1000XLI features a sealed lead acid, valve-regulated (VRLA) AGM battery that requires no maintenance. The battery boasts a lifespan of 5 to 10 years, ensuring long-lasting performance. Efficient Power Specifications: The Smart-UPS RT 1000 provides a robust 700W output power with an input voltage of 230V, making it suitable for a range of electronic devices, including servers, networking equipment, and other critical components. Physical Specifications: Compact Design: The UPS features a 2U case size and measures 432 x 85 x 483 mm, allowing it to fit into standard racks with ease. Weight: Weighing 29 kg, the robust design ensures stability and reliability in demanding environments. Socket Configuration: Includes 6x IEC 320 C13 sockets and 2x IEC Jumpers, offering ample connectivity for multiple devices.

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head Gbsdpfjpyg Saex Aatot 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Gbjdsty Tidspfx Aatst Number: 4 Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Gjdpfoppa Tgox Aatjbt Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.