Used Cencorp 1500 Of for sale (7,740)

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Redovtpdgjpfx Abpocf Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Rcodsvxz R Nspfx Abpef Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Rcjdjvh Ndpepfx Abpjf Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: new, Year of construction: 2025, Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version; filling range: 10-1500g; accuracy: +/- 0.3-1%; suitable for: metal cans, glass bottles, plastic jar, paper bags, etc.; container dimensions: diameter 40-130, height 80-220mm with different can feeding screws; max. speed of the machine in neutral: 60 fillings/min; power: 220V, 2.0kW; machine dimensions: L1850xW1366xH2100mm; 260kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Rsdpev Nk N Nsfx Abpjcf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine New machine Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 Tool magazine 24-way - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Redpsvwip Dsfx Abpjcf Machine control Heidenhain TNC 620

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Redpfx Asvz Hi Njbpecf Weight 230 kg Total power requirement 1,6 kw

Condition: excellent (used), Attachment: Used chamber filter press Rcodsg S I Smopfx Abpef Design: Top-driven Filter plate format: 1500x1500 mm Filter plates: 70 pieces / final expansion to 100 pieces Filter plates: PP Filter cloths: available as an option, matched to the medium Throughput: 20-25 m³ per batch Filter area: 242 m² Press volume: approx. 50 dm³ Filter pressure: 15 bar Closing pressure: 400 bar Plate transport: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Filling pump: available as an option

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor, inclined conveyor belt, chip conveyor, chip conveyor belt -Sale / handover: in the current condition as viewed -Webbing: see photo for damage -Conveyor belt: Conveyor belt height adjustable / tiltable -Speed: 18.3 m / min -Height horizontal: 670 to 940 mm -Belt width: 380 mm -Transport dimensions: 1570/500 / H830 mm Rcedpfx Aehgr Rkebpef -Weight: 73 kg

Year of construction: 2026, condition: new, ADL III 1500 AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS HVAC This rectangular ventilation duct machine is capable of producing flat sheets and U- and L-shaped duct elements without the need for additional programming. It can also produce one type of L-shaped Pittsburgh Bracket. Auto Duct Former is equipped with Servo Motor and Servo Reducer to avoid measurement errors. The bender and guillotine are driven by a hydraulic system. Equipped with two types of ribbing, type Z and trapezoidal. It has a selector to change sheets to 3 sets of uncoilers Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum channel size: 100x100mm Dimensions: W 2,200mm x D 5,000mm x H 1,500mm Rodpfx Ajp T Sk Hsbpocf Weight: 3.000Kg Power: 2.2Kw Servo Motor Decoilers on rails: 3 pcs Plate change selector

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, total length: 2,400 mm, total width: 1,200 mm, Perforated table 1200 x 2400 x 200mm thickness of the table top 20 mm, diameter of the holes 28 mm with wireless remote control Swivel range 360° Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment Rcodst U Rccopfx Abpjf

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, surface plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate Rcjdpfx Absub D Rlepsf -Manufacturer: Planolith, granite measuring plate hard stone measuring plate -Size: 2000 x 1500 mm -Accuracy grade: O (< 0.012 mm) -T-slot: width 14 mm -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO Redpfx Aou Nc Risbpjcf *

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height Rcsdpfouxftrox Abpof adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL Rjdpfouxfu Nsx Abpocf - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Roller conveyor drive motor: 0.18 kW 88 rpm -Drive motor conveyor belt: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roller spacing: 250 mm Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg Rjdpfx Abstlzgzspscf

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation Rcedpfx Ajuqdzdsbpsf PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 3000 mm Rcodpfxjfgyg Sj Abpof Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 1500 x 1500 mm, 75 plates, open spout, 30 mm cake thickness, pressure max. 3500 liters, filter surface 270 m², dimensions 8500 x 2200 x 2400 mm, weight 28,000 kg, plate transport, motor hydraulics, drip tray, filtrate, with or without filter cloths Rcsdpsfbbp Uofx Abpjf

Condition: new, empty load weight: 390 kg, maximum load weight: 1,110 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 1,180 mm, tire size: 145/80R13, Low loader with cover from the manufacturer ANSSEMS model GTT1500 301x126 VT2. Rcodsq Sviqepfx Abpof The standard equipment of the Anssems cover trailer with brake includes aluminum side walls, aluminum cover with gallery, overrun flap, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as toolboxes, lashing straps, lashing eyes, 100 km/h and anti-theft devices.

Condition: used, Year of construction: 1901, 1500 ltr. Capacity PTO shaft Container attachment Hydraulic pusher / Rcjdpfx Asr Hnt Usbpjf

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles Rodpfstwzhvsx Abpjcf - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1500 1 NEW VEHICLE Internal dimensions: 256 cm x 150 cm Side wall height: 30 cm Loading surface height: 66 cm Gross vehicle weight: 1500 kg Payload: 1182 kg Braked single-axle high loader Overrun brake and handbrake by KNOTT Axle with large brakes and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension latches Drop-down and removable on all sides 15 mm thick, non-slip, durable phenolic plywood floor Automatic jockey wheel rated for 400 kg support load 8 noise-reducing lashing eyes with 800 kg tensile strength Reinforced 13" C-rated tires with steel valves M+S (Mud & Snow) tires Net/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, fog light (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - Equipment for 100 km/h approval (shock absorbers) - Spare wheel with holder - Without sideboards (discount) - Side wall extension to 35 cm - Black Edition (powder-coated sideboards and rims in black) - Loading ramps - Steel plate on floor panel - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh sides in various heights, also enclosed Rodpsrk Ir Ujfx Abpjcf - 30 cm extension side walls with tension latches - Flat tarpaulin with or without bows - High tarpaulin 160 cm or 180 cm More accessories available on request! Plus shipping to Gera and vehicle registration document: €200 net Images are exemplary and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist for axle repairs, including for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh (Note: unclear reference, not translated) We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Rjdetq Ufvepfx Abpocf Mag. no: 0848/2

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Rcodpfx Absrq Ebfopjf Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Rcedpsikivmjfx Abpsf CNC or Not: Yes Cooling Mode: WATER COOLING