Stamping and Punching Machine

LVD DELTA 1500 LB-TK

Condition: new, The generator is new, complete with control panel, diesel tank, exhaust, and batteries. Description: Model: NWR150 Ricardo Motor Newpower Generator Power Generator Continuous Power: 135 kVA / 108 kW Maximum Power: 150 kVA / 120 kW Engine: Kofo Ricardo R6105AZLDS, 6-cylinder water-cooled Connection: Power circuit breaker, 5-wire direct connection Frequency: 50 Hz Voltage: 400/230 V Dwedpsnkap Sofx Ap Dec Including mechanical speed control, AVR, battery charger, soundproofing, coolant heater, Controller: Comap AMF8, grid feed-in Dimensions: 3030x1130x1810 mm Weight: approx. 1650 kg Diesel tank: approx. 245 L At 100% load: approx. 27.8 L/h At 75% load: approx. 18.1 L/h At 50% load: approx. 14.0 L/h Grid monitoring, grid feed-in, soundproof Ready for immediate use. Additional costs: 250A automatic switch: €1080 plus VAT. Socket outlets - Upon request Shipping: Worldwide transport including unloading is possible at an additional cost. To provide an exact freight price, please send us an inquiry with your data and full address.

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Dodorx Sydepfx Ap Dswc Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR125 Ricardo Motor Newpower generator generator set Continuous power: 110 kVA / 88 kW Maximum power: 120 kVA / 96 kW Engine : Kofo RIcardo R6105ZLDS, 6 cylinder water-cooled Connection: circuit breaker Dsdpfx Apsmga Svo Dowc Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3030x1130x1510 mm Weight: approx. 1619kg Diesel tank: 125 L At 100% load: approx. 23.2 L/h At 75% load: approx. 17.5 L/h At 50% load: approx. 11.8 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 250A automatic switch : € 1080 Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The generator is new, complete with control panel, diesel tank, exhaust, and batteries. Description: Model: NWR150 Ricardo Motor Newpower Generator Power Generator Continuous Power: 135 kVA / 108 kW Maximum Power: 150 kVA / 120 kW Engine: Kofo Ricardo R6105AZLDS, 6-cylinder water-cooled Dwjdpfxjmdn Sme Ap Dsc Connection: Power circuit breaker, 5-wire direct connection Frequency: 50 Hz Voltage: 400/230 V Including mechanical speed control, AVR, battery charger, soundproofing, coolant heater, Controller: Comap AMF8, grid feed-in Dimensions: 3030x1130x1810 mm Weight: approx. 1650 kg Diesel tank: approx. 245 L At 100% load: approx. 27.8 L/h At 75% load: approx. 18.1 L/h At 50% load: approx. 14.0 L/h Grid monitoring, grid feed-in, soundproof Ready for immediate use. Additional costs: 250A automatic switch: €1080 plus VAT. Socket outlets - Upon request Shipping: Worldwide transport including unloading is possible at an additional cost. To provide an exact freight price, please send us an inquiry with your data and full address.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Dwjdpfjy Iplfjx Ap Dec Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm Dwedpoxvch Tjfx Ap Dsc MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm Dedpomk T Rbefx Ap Dewc diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Dwsdpotzy R Njfx Ap Dsc Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Side passage in the shoulder 1,400 mm. Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium Dwsdpevq N Ndsfx Ap Doc

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. Dwjdsp Am T Uopfx Ap Doc The stand is ready for launch.