Used Ceric Bulk Feeder for sale (3,281)

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Isdpfx Aewyf N Dohnetl Diameter 270mm Length 2400mm Motor power 2.2kW Entirely stainless steel See our other advertisements.

Condition: new, Wheel diameter 120 mm Wheel width 60 mm Iodpfxjfdl Evj Ahnotl Wheel diametre hole 35 mm

Condition: used, Magnetic conveyor belt, magnetic sliding conveyor, DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Iedpfxoi Huzxs Ahnetl Type No.: MBF 326P31.75 Item No.: 44489-10 Year of manufacture: 2017 Belt width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to the modular frame) Insertion length approx. 3900 mm (without the modular frame) Insertion height 210 mm Insertion width housing 370 mm Insertion width threaded inserts for adjustable feet 410 mm Insertion width at the modular frame 470 mm Conveying height – discharge height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Continuous chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: new, Year of construction: 2024, Conveyor belt: hydraulically foldable in and out Scrapers: front and rear scrapers Conveyor belt length: 25,000 mm Engine: Caterpillar 4.4 fixed-speed engine, 133 hp Itsdpfxsikqxtj Ahnjl Track chassis: ground plates 400 mm Discharge height 22.5° / 27.5°: 8,820 / 11,000 mm Conveyor belt width: 1,200 mm Feed hopper: capacity 8 m³

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Itsdpfehlnzkox Ahnel Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, Name: Spiral conveyor with spiral Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year built: 2008 Speed: 28 rpm Trough diameter: 280 mm Conveying length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: Sewage sludge or similar sludge Iedpforpmgfox Ahnstl Driving force: 3 kW Flow rate: 3 kW Dimensions: L 6.600 x W 400 x H 1.600 mm Empty weight: 800 kg Technical doc.: Yes Message: Trough made of stainless steel and spiral made of normal steel, Pitch angle 22°, Throughput of sewage sludge 1.5 - 2.0 m3 /h Accessories: Slewing ring (swivelling) Condition: Second hand Price: On demand

Condition: good (used), Offer 24083 Technical data: - Capacity 300 L - Load capacity up to 750 kg - Entry pockets for forklift trucks Itodpfer Hn Daex Ahnol - Tipping function - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Condition: good (used), Bar feeder LNS Itedpfx Aher Iygijnjl

Condition: excellent (used), Length 630 cm Width 200 cm Itodpfxjttl Ave Ahnel Roll width 32 cm 0.63 kW motor Infinitely variable speed regulation

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: Ijdpfx Ahodd Hi Esnstl • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Itsdpfxonl Sns Ahnel Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: new, Technische Daten: fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg Iedpfx Aoby U Dpjhnstl machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote. Ijdpfx Ahsq Ec Rgonetl

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | Itodjq I Nviopfx Ahnol | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. Itedeq Nfuzspfx Ahnjl 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Iedpfx Ahoq Ngafenotl Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: ready for operation (used), To suit a MM 227/6 insert line- Price £5,000   IN STOCK Itodpfx Ahsq U Trdonsl

Year of construction: 2013, condition: ready for operation (used), Muller Martini Streamfeeder, year of construction 2013 Ijdpfx Aot Iyhzehnstl

Year of construction: 2024, condition: new, Hello. I have a semi-automatic packaging machine for bulk goods such as spices, flour, sugar, semolina, etc. for sale. The machine packs weights from 5g to 5kg with 1% accuracy. The packaging speed is 500 to 1000 bags or sachets per hour. The machine consists of: 1. a screw feeder that feeds the product into the packaging machine. Using a sensor, the feeder automatically fills the packaging machine's hopper. The hopper has a capacity of 45L. 2. a packaging machine 3. a plastic bag sealer that seals the already packed bags. The machine's power requirement is 900W, 3-phase, 50Hz. The entire system weighs 150kg. Dimensions: 1000 x 650 x 2000 mm POSSIBILITY TO PACK PRODUCTS IN CANS OR JARS!!! Ijdpfx Aett Ip Ishnotl PayPal payment available!!!

Condition: good (used), Year of construction: 2011, operating hours: 15,100 h, functionality: fully functional, CNC turning machine Manufacturer: DOOSAN Type: LYNX 220 G-S Year of manufacture: 2011 Isdozybi Repfx Ahnstl Equipped with: FANUC i control system X-axis Y-axis Chip conveyor Bar feeder magazine LNS Quick Load Servo 65

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg Itjdpfx Ajw E I Ruohnjl

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: SP1151 ES, URGENT SALE: Iodpozzdktsfx Ahnstl Loom details: Vamatex SP1151 ES 2000 model. 14 frames. Stäubli Type 2600 dobby. 20 levers. Two 100mm warp beams. One 80mm warp beam. Two electronic weft feeders. Two Selmini fabric take-up units. EXW delivery from Denizli, Turkey Ready to use Currently avalaible

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Preparation for heating the boards with hot water - without a boiler Itjdpfx Asvva Syshnel Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, overall weight: 4,850 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine. • Y-Axis: Included • CNC Total Operating Hours: 8836 hours (THP LAV) • Electrical Power Supply: AC 380/400V, 3-Phase, 50/60 Hz • Nominal Capacity: 50.71 kVA / 11.0 kW • Maximum/Full Load Current: 73.20 A • Interruption Current: 9000 A Additional equipment • TOP Automazioni bar feeder • Chip conveyor • Parts catcher / conveyor output belt Itjdpfxszzn U Ao Ahnjl • Hydraulic unit • USAG tool trolley • Driven tool holders: 10 motorized modules / driven tools Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Industrial vibratory classifying screen, vibrating screen, two-deck screening machine, Binder+Co WS 1300, Used Machine Manufacturer / Brand: Binder+Co AG (Gleisdorf, Austria) Type: WS 1300 Serial No.: S 2035 Order No.: 20 235/20 Year of Manufacture: 1992 Design: Robust two-deck steel construction with upper dust protection cover featuring a dust extraction connection. Drive: Cardan shaft drive / power transmission between the drive motor and the eccentric shaft. Accessories: 4 heavy-duty vibration-damping rubber mounts for the spring/suspension mounting points. SCREEN DECKS: Upper deck: Bar screen with approx. 12 mm bar spacing, suitable for coarse screening. Lower deck: Square-mesh screen with approx. 12 × 12 mm aperture size, suitable for fine screening. APPLICATION: Ideally suited for the accurate separation and classification of gravel, sand, stone, coal, recycled materials, scrap metal, and other bulk industrial materials according to particle size. OVERALL DIMENSIONS: Width: 3300 mm Depth: 2130 mm Iedszxd Tcopfx Ahnstl Height: 1440 mm Weight: 2300 kg