Used Roda for sale (96)

Condition: new, Year of construction: 2021, functionality: fully functional, Maf Roda Agrobotic CEP. 18B1500-TDDI Brusher 18-Brush Brusher Brand: Maf Roda Agrobotic Model: CEP. 18B1500-TDDI Serial Number: 20R5200/2 Year of Manufacture: 19-02-2021 Lajdpfxowqxbbj Aanok Brush Width: 1500 mm Overall Dimensions: 2500 x 1900 x 2200 mm Never Used!!!

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Lasdpfjuqd Tmex Aanjk Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm Lsdevzxrpjpfx Aanoak table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. Lodpou Nad Tofx Aaneak The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Lajdpex H Ivtofx Aanok Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm Laedpfx Aaov Srfdsnek - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: Z293-068, total height: 3,800 mm, total width: 4,000 mm, total length: 5,000 mm, table width: 1,500 mm, table length: 2,500 mm, RASTER ZEULENRODA GHP 400 H/K-08 Testing Press, Year of Manufacture 2004 TECHNICAL DATA & EQUIPMENT: Lodpjw Rggwofx Aaneak Serial Number: Z293-068 Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 230 V Connection: 240 kW Rated Current: 100 A Hydraulic Pressure: 320 bar Rated Force: 2 x 2000 kN Table Dimensions: 2500 x 1500 mm Reach of Manufacturer Hilma’s Consoles: 1600 mm Including CNC control, cooling unit, and filtration/extraction system REFERENCE NUMBER 138 DIMENSIONS & WEIGHT: 5000 x 4000 x 3800 mm 32,000 kg COLLECTION NOTES: The item will be available from October 2025. The pick-up date must be coordinated for a specific day between 20.10.2025 and 31.10.2025. FCA: 59759 Arnsberg (DE), loaded onto truck

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Lasdovai R Topfx Aansk Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Laodpfxevzxq Se Aansk with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1982, pressure 63 t throat 315 mm stroke 8 - 120 mm table surface area 630 x 800 mm dayligth 560 mm ram adjustment 70 mm no. of strokes 56/90 Hub/min ram surface 400 x 500 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: Lajdot Ev Tnjpfx Aanjk - Machine is completely disassembled, checked - Machine is repainted - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Ledpfx Aajx H Iu Nenjak Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: excellent (used), Year of construction: 1984, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, type of input current: three-phase, stroke length: 500 mm, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Ledpfxjqy E I Rj Aanjak

Condition: excellent (used), functionality: fully functional, total height: 3,200 mm, total width: 1,200 mm, total length: 1,560 mm, pressing force: 100 t, table width: 750 mm, table length: 560 mm, operating speed: 200 mm/s, overall weight: 5,040 kg, reverse speed: 200 mm/s, distance table to ram: 800 mm, stroke length: 500 mm, The press is in nice condition. It is fully complete and under power. Laedpsxwuz Usfx Aansk

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Laodpfx Aoxr Azfoanjk Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: used, Cutting force of 10 tons Ledpfxexxz Hao Aaneak Sheet thickness up to 3.15 mm Maximum material strength: 50 kp/mm²

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm press is to be dismantled and partially overhauled: - dismantling and checking - new colors - new control cabinet with ABB safety control and touch screen - current UVV test with brake time measurement and press test book Laedsch Umcopfx Aansk - COnversion to safe operation

Condition: used, Technical details: Laodpfju Nfuqsx Aansk pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, total height: 3,700 mm, total width: 1,250 mm, total length: 2,200 mm, throat depth: 800 mm, pressing force: 250 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 8,000 kg, reverse speed: 110 mm/s, ram plate width: 750 mm, ram plate length: 450 mm, stroke length: 500 mm, oil tank capacity: 500 l, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Laodpfx Aovcb Tljansk

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm feed down 100 mm/sec Ljdewbizyopfx Aanoak feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm Laodpfx Aaou Nfvbonok ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Year of construction: 1969, condition: used, pressure 63 t throat - mm Ledpfjh Dfctox Aansak stroke 16 - 125 mm table surface area 800 x 630 mm ram adjustment 70 mm no. of strokes im Dauerlauf 80 Hub/min max. distance table - ram 417 mm ram surface 500 x 400 mm clamping plate thickness 70 mm total power requirement 6 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW Lasdpfx Ajtqm Dhsanok weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Condition: used, pressure 63 t Lsdpfx Ajtqm Dqjansak throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec Ledpfx Aed R Szueanoak max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t Ljdpfx Aev Rgwxsanjak dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m