Used Corisma Omega Cm43 Edm Wire for sale (3,399)

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Nodpfx Ajy Ed E Iob Uodb Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8461, Offer Number: D12L/8461 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Ndsdpfx Abszd U Rcj Usb Location: In our warehouse

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Ndedpfx Abjzcap Ao Ujb Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, GF AgieCharmilles FORM 2000 Year of manufacture: 2008 C-frame design, fixed table with lowerable container Travel ranges (X/Y/Z): 400 x 300 x 350 mm Table-to-spindle distance: 170-520 mm Max. workpiece size: L x W x H = 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U = 0-100 RPM) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control panel 15” LCD color screen, mouse or touchscreen, jog shuttle and hand control Includes CAPA electrode changer - 40 electrode positions - 4 pallet positions Net weight of the machine: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us after the order is received. Njdpfx Aszgt H Isb Uodb Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Nodpfx Abszgt Ixs Uodb U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total width: 2,710 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, product length (max.): 2,420 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details. - Max. Workpiece Dimensions: 1050 mm x 800 mm x 295 mm- Max. Workpiece Weight: 1500 kg- Certification: CE Marked Ndodpfxozhbyrj Ab Ueb

Condition: good (used), Olympus CKX53SF inverted microscope, suitable for cell culture, live cell observation, and general laboratory use. This configuration is equipped with integrated phase contrast (iPC) and comes with multiple objectives and various accessories. Configuration: UPLFLN4xIPC/0.13 objective CACHN10x IPC/0.25 objective LCACHN20xIPC/0.40 objective LCACHN40xIPC/0.55 objective 10X/22 eyepiece CKX3-SLP pre-centered phase contrast slider Various accessories, including coverslip platforms, sliders, and additional accessories. Nedpfszhidfsx Ab Uodb Features: Inverted microscope, ideal for cell culture applications. iPC phase contrast for fast and high-contrast observation. Professional Olympus platform, compact and well-suited for laboratory environments.

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Ndodpfx Aozgf Spjb Uob Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2010, Overview This wirehooder was manufactured in 2010 by Robino & Galandrino. The RECORD 14000 is designed for the application of wire hoods on bottles. The machine was in production until the end of March 2026 and is in working condition. The machine has been inspected, cleaned, and lubricated. Technical data  Ndjdpfxozdb Ens Ab Ujb - Capacity: up to 14,000 bottles/hour - Application: Wire hood application - Configuration: RECORD 14000 - Utilities: 400 V / 3F / 50 Hz / ICC 20 A / IN 4.15 A

Year of construction: 2012, condition: ready for operation (used), Production facility including built-in hob and oven molds. After-sales support and knowledge transfer will be provided. CNC Vertical Machining Center (AWEA-2003-BM850-0344); Wire EDM Machine Equipment (MICRON-SP-7-42-741); 30 KVA UPS (Wire EDM); ESC 15 Screw Type Air Compressor (ZTG2100123) and Equipment; 2K522 Radial Drilling Machine; 1K625 x 1000 Lathe; Russian-Made Planer; 3MR Milling Machine for Moldmakers; EP 190*200*50 DT Distribution Compressor Panel; DK-8 Drilling Machine; Stanko Grinding Machine (Serial No. 367/185/97); Durmazlar HAP 1235 Hydraulic Press Brake (Serial No. 7010024369); 7-ton Octo-Brand Monorail Crane; 3-ton Octo-Brand Monorail Crane; 1/2-ton Monorail Crane; Angle Rebar Cutting Saw Machine; AGM 4000 INV Decoiler and AGM DSS 503 Servo Drive; CMC 2000M Decoiler and CMS S 302 Servo Drive; OMERA Hem Cutting Machine 0350i R100; 300-Ton Hydraulic Press; 200-Ton Hydraulic Press; C-Type 150-Ton Air-Clutch Eccentric Press; C-Type 120-Ton Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 80-Ton Air-Clutch Eccentric Press; C-Type 60-Ton Air-Clutch Eccentric Press; 30-Ton Eccentric Press; Njdszi U U Eopfx Ab Ujdb 25-Ton Eccentric Press; 25-Ton Eccentric Press; 1/2-ton Electric Forklift; Sheet Metal Shear; Pallet Sander; Wall-Mounted Grinder; 2 Hydraulic Mold Lifting Carts; 2 Pallet Trucks; 2 Welding Machines; Mobile Welding Machines; Argon Oxygen Welding Set; PM 78 Hydraulic Pump;

Condition: used, This listing is for 1 of 2 BMG Labtec FLUOstar Omega Microplate Reader The unit is in full working condition and ready for immediate use Ndsdpfx Ajzi A Hpjb Uob This microplate reader is a robust and highly versatile system designed to provide accurate and consistent performance for a wide range of analytical applications. Manufactured by the industry-leading BMG Labtec, this reliable unit is an excellent addition to any modern laboratory environment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,225 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 9, total width: 2,275 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4681.TZ25.PM74852---- Errors and prior sale are subject to change! SPECIAL EQUIPMENT * Windows: Side windows, 2nd row, fixed, left and right incl. sliding door left and right * Heated rear window, fixed - Interior mirror - Partition with window * Radio: Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation - DAB/DAB+ - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Limited slip differential, mechanical * Auxiliary heater (fuel-water heater) with remote control incl. H7 AGM dual battery * MTW conversion: Special signal bar RAUWERS PHOENIX SOLARIS - electronic siren city/country - Control panel for the special signal system on the center console - Antenna for digital radio - Third taillight at the rear - Schnierle single seats FURTHER EQUIPMENT * 2-stage release for passenger compartment and cargo area (rear door flaps or rear tailgate) * Airbag (passenger side) * Airbag driver side Njdjzkyn Hspfx Ab Uodb * Anti-lock braking system with electronic brake force distribution * Exterior mirror housing in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display * Roof console * Double-wing rear door with 180° opening angle (without window) * ESP - Hill start assist - Safety brake assist - Traction control * Power windows front, electric - with quick-up/down function for driver and passenger * Parking brake, electronic * Ford Key Free system - incl. Ford Power-Start function * FordPass Connect - incl. live traffic information and WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windshield, heated * Floor mats: Rubber floor mats front * Grab handle, driver and passenger side * Glove compartment with locking lid * Interior lighting front with delay function * Automatic climate control front - with recirculating air heating - with R-1234yf refrigerant * Headrests front * Fuel tank 55 l * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals front - Cornering lights, static - High beam assistant * Cargo area lighting (LED) - extra bright * Cargo area floor: Vinyl floor covering "Easy Clean" * Steering wheel, Sensico in leather look * Center console, small * Emergency call assistant eCall * Package: Technology Package 2 (Limited) - Exterior mirrors with integrated turn signals, electrically adjustable, heated and automatically folding - Audio system 13-inch multifunction display and Ford SYNC - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning function - Lane Keeping Assist incl. Lane Departure Warning - Park Pilot system front/rear - Cruise control - Intelligent speed limiter with speed limit display - Rearview camera * Particulate filter: Diesel particulate filter * Radio accessories: 4 loudspeakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 16, 10-spoke design - with 215/65 R 16 tires * Windshield wipers with rain sensor * Sliding door right * Mud flaps rear * Mud flaps front * Side wall paneling high * Power steering * Seat belts - Seat belt pretensioners and force limiters front - Warning system for driver seat belt not fastened * Seats: Seat package 46 - Driver seat

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Ndsdpoytfx Djfx Ab Ueb Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Control: Mitsubishi - Advance - CNC EQUIPMENT Cutting in water bath Automatic wire threading Wire chopper Cooling unit

Condition: good (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, total width: 1,900 mm, total length: 1,800 mm, table width: 650 mm, table length: 850 mm, Sinker EDM machine with a C-axis. Ndjdpfxjzqd Rrs Ab Ueb

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, total height: 1,860 mm, total width: 1,040 mm, total length: 1,000 mm, overall weight: 1,400 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Ndsdpszrfawsfx Ab Uob The machine has not been inspected but was in working order until the end.

Condition: ready for operation (used), operating hours: 99 h, functionality: fully functional, machine/vehicle number: 620110, year of last overhaul: 2026, HEIDELBERG SM-74-2 | 2-Color Offset Printing Machine Ndodpfx Ajy Sxb Dsb Ueb Year of manufacture: 1994 Total impressions: 99 million Machine No.: 620 110 Printing specifications: - Cpc 1-04, CP Tronic - Max. sheet size: 530 mm x 740 mm (20.87" x 29.13") - Min. sheet size: 210 mm x 280 mm (8.27" x 11.02") - Max. print format: 510 mm x 740 mm (20.08" x 29.13") - Material thickness: 0.03 mm - 0.60 mm (0.0012" - 0.0236") - Gripper margin: 8 mm - 10 mm (0.32" - 0.39") Print output: - Maximum: 15,000 sheets per hour (sph) Plate cylinder: - Cylinder undercut: 0.15 mm (0.0059") - Distance from lead edge of plate to lead edge of print: 59.50 mm (2.34") Plates: - Size (L x W): 605 mm x 745 mm (23.82" x 29.33") - Thickness: 0.25 mm - 0.30 mm (0.0098" - 0.0118") Feeder: - Electronic pull lay control - Integrated preloading device - Ultrasonic and electromechanical double-sheet detector - Speed-compensated air blast - Self-cleaning pneumatic pull lay Printing Unit: - AutoPlate quick plate change system - Alcolor dampening system - Automatic wash-up devices (inking unit, blanket, impression cylinder) - TransferJacket Blue Delivery: - Non-stop delivery with rake - Super Blue delivery drum - Powder spray device Machine is in production and can be seen in operation.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. Ndjdpozbbmtjfx Ab Ueb We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Travel U-axis: 400 mm Travel V-axis: 250 mm Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Njdoyz Rvlepfx Ab Uedb Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. Ndodpfx Aoy Eyzfob Ueb The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: used, mileage: 7,81,309 km, power: 390 kW (530.25 HP), first registration: 03/2022, fuel type: diesel, number of seats: 89, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other - Front refrigerator - Sleeping cabin - Toilet - USB connections - Webasto Other Ndedpjxf A Tzefx Ab Ujb - DVD player - Air conditioning = Additional Information = Height: 400 cm Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/- 20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or city bus for you, tailored to your needs and budget. All information is provided without warranty. Errors, prior sale, and typographical errors are subject to change. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Note: Machine is still at the customer’s location – available at the beginning of 2027. Ndsdpfx Abezxrnns Ujb For sale is a mobile Hartenberger “Wirex CZ-1/1 band sawmill / mobile sawmill in a robust design. The system is designed for cutting roundwood or logs into boards, planks, and timbers. The existing hydraulic log handling system with a loading/lifting arm, log turner, and log clamp allows larger logs to be handled and positioned on the system. Technical data / equipment: Manufacturer: Hartenberger woodworking machines Model: Wirex CZ-1/1 Machine type: Band sawmill / mobile sawmill Year of manufacture: 03/2007 Motor power: 12 kW Total weight: approx. 2,500 kg Width: approx. 2,355 mm Height: approx. 2,850 mm Mobile design Tandem chassis Electric, continuously variable feed Feed speed: approx. 4–35 m/min Electric height adjustment via chain Roller diameter: approx. 500 mm Saw band length: approx. 4,800 mm Saw band width: approx. 35–45 mm 1 loading/lifting arm 1 log turner with gripper 1 hydraulic log clamp Hydraulic log handling Roller/support track for the logs Dust extraction connections Stable steel frame construction Condition and scope of delivery according to photos The system is in used condition, corresponding to its age, and shows corresponding signs of wear. Inspection and demonstration possible by appointment. Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes subject to confirmation. All information without guarantee.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 12 h, functionality: fully functional, travel distance X-axis: 360 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 500 kg, total height: 2,500 mm, total width: 1,600 mm, total length: 2,000 mm, table width: 550 mm, table length: 350 mm, warranty duration: 12 months, input voltage: 400 V, EDM 310MF30, Year 2024, Completely Retro Technical specifications: Travel paths X x Y x Z 360 x 270 x 270 mm Work table 550 x 350 mm Work container 770 x 520 mm Distance between table and spindle sleeve min./max. 160/430 mm Electrode weight 25 kg Workpiece weight 500 kg Work tank fill height 300 mm Power supply 400 V AC 50/60 Hz Power consumption 6 KVA Machine dimensions W x D x H 2040 x 1600 x 2670 mm Equipment MF30 user interface Touchscreen display 65 A EDM generator Hand control panel with enable button Integrated cooling unit C-axis 30 rpm, holding brake Flushing/vacuum system for table and head New cartridge filter system Ndedpfx Aswga H Rsb Usb Working pump Steel table with grooves CO² extinguishing system, new TÜV approval 20-station tool changer Erowa ITS automatic keyless chuck 12-month warranty Transport, on-site commissioning, training Option: 1. New APC910/2 control system (Windows 10) User interface MF30 2. Generator exopuls+60A

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Nsdpszi Sfuofx Ab Uodb Year: 2003 SPECIFICATIONS Travel

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 800 mm, workpiece height (max.): 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, tank capacity: 500 l, space requirement width: 3,000 mm, space requirement length: 3,000 mm, The machine is used daily and provides accurate and precise results. All machining operations can be programmed via the control unit, and the automatic electrode change can also be programmed. It includes an EROWA chuck and probe, along with numerous accessories and clamping devices. We can assist with loading the machine onto the transport vehicle using our own crane. Ndjdpezc E Dxsfx Ab Usb

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire -Manufacturer: Krupp, shielding gas wire electrode CrNi 19 9 Nedpfsgxgmfox Ab Uodb -Type: NOVONIT 4316 Ø 0.8 mm -Dimensions: Ø 300/100 mm -Total weight: 15.4 kg