Used Crown Tc3000-12-Tl for sale (23,778)

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Gedpfocbnigjx Albeuc Machine number: A 21

Condition: used, machine/vehicle number: 518A, overall weight: 1,700 kg, axle configuration: 1 axle, first registration: 03/1996, The floodlight trailer is in a dreamlike good condition directly from the military Well maintained and maintained, the body is in a super good condition, the Nencki is equipped with: 400 volt emergency generator 15.6 KVA with 4-stroke engine (gasoline) with electric starter, light mast with 6 steps that can be cranked up to 7465mm by hand, 6 headlights with 1000 watts each, these can be rotated 240 degrees vertically and 360 degrees horizontally from the control panel, Extendable 4-point support with which the floodlight trailer stands securely up to a wind speed of 80Km/h for higher wind speeds the mast must be braced, - Instructions in 3 languages (German, French, Italian). - The trailer has the dimensions L/W/H 4005/ 1740 / 2300 in folded driving mode, - The lighting system is overrun braked with Swiss 50mm drawbar (can also be converted to a ball head coupling, is not included in the price, - Tire size 205 R 16, other extras: support wheel for cranking and folding, tarpaulin, - 3 pieces in stock ! ! - Operating hours from 129 to 343 H - All my vehicles can be seen on my homepage. - Now you are rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to settle for less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Gjdpfsqx S Dfex Albeuc

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. Gusdpfjfv Aw Nex Albsc • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: used, mileage: 95,862 km, power: 96 kW (130.52 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, airbag, central locking, cruise control, immobilizer system, onboard computer, Special features Godpfxjwz Ik Hj Albjuc - ABS - Radio - Airbag - On-board computer - Power steering - Cruise control - Driver’s seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - Ladder rack - The vehicle is equipped with a new genuine particulate filter valued at €2,300. Superstructure Aerial Work Platform Time Versalift ETL-32-125 - Working height: 12.5 m - Lateral outreach: 7.3 m - Basket capacity up to 120 kg - Rotation: 360° - Remote control - Engine start/stop function - Electric emergency pump - Hour meter - Flashing beacons - 220V socket in the basket The vehicle is fitted with an aerial work platform (model Time Versalift ETL-32-125), mounted on a Renault Master. This telescopic platform is ideally suited for maintenance, installation, and inspection work at heights of up to approximately 12.5 m. An ideal vehicle for municipalities, utility companies, telecommunications, or trades businesses. All platform functions are operational and have been checked by our workshop. The vehicle is ready for registration. German papers, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations are made exclusively with original photos taken in-house – guaranteeing full transparency regarding the actual condition of the vehicle. Our vehicles undergo extensive reconditioning in our own specialist workshop prior to sale – including mechanical, bodywork, and paintwork. Therefore, they are optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – including remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of special equipment on request Looking for something specific? If you currently can’t find a suitable vehicle for your company in our inventory, contact us – we will be happy to assist you. For technical details, additional photos, or a personal consultation, we are always at your disposal. All stated prices are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information only and do not replace individual advice. Only the information in the purchase contract is legally binding. Subject to changes, errors, typographical mistakes, and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,177 h, machine/vehicle number: 10067745, empty load weight: 205 kg, construction height: 1,400 mm, fuel type: electric, drive type: Elektro, working height: 2,997 mm, Vertical lift Chassis number: 10067745 Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Battery Ah: 219Ah Guodpfx Alouhwm Hobec Description: Crown WAV 60-118 No.: C Year of construction: 2018 Operating hours: 2,177 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Gjdpfx Asya Da Hslbeuc Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: used, Year of construction: 1979, weight max. in kg 2000 kg tool adaptor Kugelkopf stroke height 200 mm battery 24 V / 240 Ah weight Batterie: 204 kg Gusdpfx Alotwbrusbjc weight of the machine ca. 320 + 204 Kg dimensions of the machine ca. 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, Manufacturer HAKER, type Perfect plus, YOC: 2009 • Charger, last UVV inspection: 01/2009,

Condition: used, Year of construction: 2011, operating hours: 13,507 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, power: 46 kW (62.54 HP), motor manufacturer: Mazda 4cil, fork length: 1,200 mm, color: other, Weights Empty weight: 4.490 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 303 cm Number of valves: 3 Condition Godpfxjv D Ec Hs Albjuc General condition: average Technical condition: average Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Condition: used, CUT-TO-LENGTH LINE IPM 1250x1.5x15 Technical data Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Gusdpoymb Arefx Albec Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm Scope of supply 1. Uncoiling cantilevered mandrel with hold down roll 2. Guiding table 3. Levelling machine 4. Loop pit with tiltable covers 5. Start-stop shear 6. Band conveyor 7. Stacker for 400 – 5000 length bundles 8. Switch cabinets & control desks 9. Hydraulics 10. Existing documentation 11. Hydraulics Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 1,580 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, KARDEX SHUTTLE 250 - 1250X825-NT GREY IN COLOUR Gusdpfswtqz Eex Albsc 45 TRAYS TRAY DIMENSIONS 1250MM X 825MM AUTOMATIC HEIGHT ADJUSTMENT FOR TRAYS WHEN ENTERING MACHINE 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT INTO ANY HEIGHT RESTRICTIONS

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Guedpfx Alevtpdgsbec Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21901N93343, Year of construction: 2024, operating hours: 137 h, load capacity: 1,200 kg, lifting height: 5,300 mm, fork length: 1,200 mm, Equipment: UVV, sideshift, TECHNICAL DETAILS Lifting capacity: 1,200 kg Fork length: 1,200 mm Maximum lifting height: 5,300 mm Gjdpfx Aezaqggslbouc MACHINE DETAILS Mast: Triple Overhead guard height: 2,200 mm Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,300 mm Dead weight: 3,200 kg Operating hours (according to display): 137 h EQUIPMENT Free lift Side shifter Blue Sport tires, front and rear Additional camera system on the forks Lithium-ion battery technology with charger UVV 08/26

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,501 h, load capacity: 230 kg, fuel type: electric, battery voltage: 24 V, working height: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 12,000 mm Godpeza Ubnsfx Albeuc MACHINE DETAILS Fuel type: electric Battery voltage: 24 V External reference: SL16691SLO

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 64 h, machine/vehicle number: A600003888, load capacity: 227 kg, empty load weight: 863 kg, working height: 3,660 mm, No minimum price – guaranteed sale to the highest bidder! Machine in very good condition with only 64 operating hours! TECHNICAL DETAILS Load capacity: 227 kg Working height: 3,660 mm Internal application, maximum manual force: 400 N External application, maximum manual force: 200 N Gedeza T Iyepfx Albeuc MACHINE DETAILS Fuel type: electric System pressure: 207 bar Battery voltage: 24 V Tilt: max. 3° / 1.5° Machine weight: 863 kg External reference: SL17313SP

Condition: used, Sawing Machine, Industrial Circular Metal Saw, KALTENBACH Professional Industrial Circular Metal Saw with Complete Infeed and Outfeed Roller Conveyors, Used Machine Manufacturer Hans Kaltenbach Maschinenfabrik KG (Lörrach, Germany) Model TL 400 Serial Number 30973 Item Number 7081 Technical Specifications Applicable Saw Blade Size: 9.5 × 1050 mm Suitable for: HSS (High-Speed Steel) saw blades Carbide-tipped saw blades Integrated Cooling and Lubrication System: Equipped with a coolant pump and spray nozzle unit for blade lubrication and cooling during cutting operations. Overall Dimensions Width: 6420 mm Gusdpfx Ajzcxiuolboc Depth: 1000 mm Height: 1720 mm Roller Conveyor Dimensions Infeed Roller Conveyor Width: 3000 mm Depth: 300 mm Height: 1010 mm Outfeed Roller Conveyor Width: 2410 mm Depth: 300 mm Height: 1010 mm

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 113720 € 2149.31 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 MK 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm Gsdpfx Alowiq E Aebeuc 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Gusdeh In Thopfx Alboc Speed -80' m/min. Reconstruction- 2022

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Table 3050 x 1550 mm Pressing force 220 kN Max. workpiece weight 280 kg Sinumerik 840 D Machine weight 17 t Gsdpfx Ajzcd Hrolbouc Axes: X ... 6500 mm Y ... 310 mm Z ... 170 mm A1 ... n x 360 A2 ... n x 360

Condition: excellent (used), power: 97 kW (131.88 HP), fuel type: diesel, lifting power: 3,800 kg/m, lifting height: 7,000 mm, Year of construction: 2018, operating hours: 3,131 h, Equipment: additional headlights, air conditioning, cabin, onboard computer, pallet forks, trailer coupling, Telescopic loader BOBCAT TL 38.70 HF AGRI Year of manufacture: 2018 According to the meter reading: 3,131 hours 3.8 tons lifting capacity 7 meters lifting height 97 kW 40 km/h - incl. new forks Gujdpfjzb Eiljx Albsc - hydraulic quick coupler - additional circuits up to the fork carriage - additional circuit and trailer socket at the rear - trailer hitch - A/C - all-wheel drive - 3 steering modes - cabin with heater - joystick - AGRI series! - original paint! - ready for immediate use! Selling price: EUR 35,900.00 net Affordable delivery also possible! For an additional charge, also available with a new bucket or a new work platform!

Condition: used, mileage: 2,74,000 km, power: 360 kW (489.46 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 15,940 kg, maximum load weight: 9,985 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, all wheel drive, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, Scania G490 6x6 timber transporter | Penz crane 12Z 8.70 | 2 pairs of bolster stakes | Automatic transmission, EURO 6, air conditioning | Cruise control, heated seats, auxiliary heater | Radio | Unladen weight 15,940 kg | Loading length 5.5 m, up to the crane 5.95 m | 50 mm trailer coupling | Wheelbase 3,900/1,355 mm | Subject to errors and prior sale Gsdjy Ifk Repfx Albeuc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available. Guedpfxsxdr Swj Alboc

Condition: used, mileage: 1,58,032 km, power: 130 kW (176.75 HP), first registration: 04/1987, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 2 axles, color: brown, gearing type: mechanical, Equipment: all wheel drive, Subject to errors and prior sale! Internal number: 0633. 2MY2407 --- EQUIPMENT Gujdjh Udydjpfx Alboc Frame for tarpaulin Flatbed All-wheel drive ... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Guedpfx Aezaq Dlelbec Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: good (used), Year of construction: 2016, operating hours: 751 h, machine/vehicle number: 189180, load capacity: 230 kg, overall weight: 7,040 kg, construction height: 2,000 mm, product width (max.): 1,200 mm, working height: 12,000 mm, enginetype: Electric, manufacturer: Haulotte Gsdpjzcbhyofx Albjuc

Condition: good (used), Year of construction: 2016, operating hours: 822 h, machine/vehicle number: 189972, load capacity: 230 kg, overall weight: 7,040 kg, construction height: 2,000 mm, product width (max.): 1,200 mm, working height: 12,000 mm, enginetype: Electric, manufacturer: Haulotte Gsdpszcba Aefx Albeuc