Used Dan - List - Denmark Morso for sale (5,569)

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Tedpfoxarl Nex Abtob - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low loader / low-bed trailer in full specification First registration 05/2025, brand new vehicle Overall length: 13,065 to 17,565 mm (simple telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Rear axle assembly length: 2,765 mm Loading height on rear axle assembly: only 845 mm LOADING HEIGHT LOW-BED: only approx. 300 mm (loaded) Technical gross weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis with 3-coat paintwork Detachable gooseneck with external main frame Tsdpfx Ajw A Ekmjbtsb Central lubrication system for front carriage and an additional unit for rear carriage All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric-hydraulic system, 24 volt Oversize package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 FT or 20 FT containers Drop-side body on saddle platform Ramps for accessing the low-bed platform 5 pairs of swivelling lashing rings, each rated at 10,000 daN lashing capacity in the low-bed section 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear carriage 1 pair of lashing rings in the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for rent or full-service leasing.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 30,917 h, load capacity: 6,000 kg, lifting height: 4,650 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, gearing type: hydrostat, overall weight: 10,000 kg, empty load weight: 10,000 kg, color: red, Equipment: air conditioning, cabin, clamp, fork extension, gripper hydraulics, head guard, lighting, pallet forks, retractable fork, sideshift, For sale: Linde H60D-03 forklift truck, year 2018 A reliable, robust machine with a lifting capacity of 6,000 kg, powered by a Deutz TCD 4.1 L4 diesel engine. The forklift is in excellent technical condition, regularly serviced and maintained, directly from the first owner. Ready for immediate operation, equipped with triple forks featuring side-shift functionality (outer forks with independent side-shift, central fork fixed, as well as collective side-shift for all three forks). The forklift comes from its first and only owner. The forklift has only been serviced at the official LINDE Service Center in the Czech Republic, with a complete and detailed maintenance record available from the date of purchase to 16.05.2025. Technically, the condition of the forklift reflects approximately 10,000 operating hours rather than 30,000. Many key systems have been replaced over the last 7 years, including regularly cleaned DPF filters and annual checks for micro-leaks and similar maintenance activities. The price includes a complete set of documents required for registration. Should a UDT inspection be necessary, we can arrange it promptly for an additional fee. We offer a range of payment options: lease, credit, cash, and bank transfer. Upon payment by cash or bank transfer, you can immediately drive the vehicle out from our showroom. Additionally, we offer insurance services – we can calculate the lowest premium for any vehicle – TRY US! We also deliver paid vehicles (cars and trucks) to any address across Europe. For more details regarding our services, please contact our sales team. Technical Data: Model: Linde H60D-03 (series 396-03) Year of manufacture: 2018 Rated capacity: 6,000 kg Load center: 600 mm Engine: Deutz TCD 4.1 L4, 4-cylinder diesel, 85 kW Drive: hydrostatic Travel speed: up to 23 km/h Lift height: approx. 4,650 mm (duplex mast with free lift) Mast height (folded): approx. 2,650 mm Turning radius: approx. 3,100 mm Unladen weight: approx. 10 t Tyres: pneumatic, in good condition Equipment: Triple fork system (ideal for long or unconventional pallets) Side-shift Cabin with heater 3rd and 4th hydraulic function Work and road lighting, mirrors, reverse signals Comfort operator seat with suspension Dual pedal system (Linde ergonomic controls) Technical Condition: The forklift has been regularly serviced at an authorized Linde service center Complete service documentation available for review All scheduled maintenance performed on time, unit in continuous operation No play, leaks or damage — fully ready for work Tjdpfxjxu Ii Te Abteb First owner, used in a single production facility The listed price is NET and applies to export and businesses. Significant discounts are available for individual customers – Feel free to contact us directly by phone to get your best price!

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Tjdpoyhdvkofx Abtsb Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. Tsdpfx Abozlry Rstjb The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, shelf length: 2,700 mm, load capacity: 600 kg, frame height: 9,000 mm, Jungheinrich MPB pallet racking – over 1,000 frames and several thousand beams We offer for sale a very large quantity of used Jungheinrich MPB pallet racking. Available components: Tjdpfx Abozrnnkjtob Frames: heights from 3000 mm to 10,000 mm, over 1,000 units, various height and load-bearing capacity options. Beams, 2700 mm long: load capacity 3 x 500 kg, load capacity 3 x 600 kg, load capacity 3 x 800 kg. Beams, 3600 mm long: load capacity 4 x 500 kg, load capacity 4 x 600 kg. A total of several thousand beams are available, allowing for the preparation of both individual racking rows and complete warehouse installations. It is possible to purchase entire batches or selected quantities. Upon request, we will prepare a configuration tailored to the warehouse height, the type of pallets, and the required number of pallet spaces. We also offer: dismantling and assembly of racking, transport, preparation of a layout plan, selection of additional components and safety features. Please contact us to obtain a detailed offer, an up-to-date list of available components, and photographs.

Condition: used, maximum load weight: 36,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Loading platform: Loading platform with hardwood floor and rear slope of approx. 1,000 mm x 8° 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings that can be folded outward (LC 5,000 daN) 2 pairs of lashing rings that can be folded outward (LC 10,000 daN) Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Kingpin supports: JOST kingpin supports (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: BPW axles, air-suspended, with disc brakes (approx. 377 mm), with lifting/lowering function (ET 120) Axle tool Tires: Tires 435/50 R 19.5 Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Tjdszn Ec Djpfx Abteb Paint finish: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red Rear section metallized and painted in RAL 9010 (pure white) Rims in silver Includes the following additional equipment: Yellow-red air couplings on the galvanized connection strip at the front 4 chocks with holder 2-inch kingpin Yellow reflector strip in accordance with EU regulations on the side and rear of the semi-trailer European reflector plates (red-yellow) at the rear of the semi-trailer Loading platform with robust hardwood floor 1 spare wheel holder under the loading platform on the right side in the direction of travel Galvanized folding supports under the slope of the loading platform 9 pairs of pocket rails for plug-in rails, approx. 100 x 50 mm, in the outer frame of the loading platform One mudflap at the rear of the semi-trailer Manual and description on a USB stick One holder for a rotating beacon at the rear of the semi-trailer One holder for warning signs including socket on the gooseneck and on the rear panel on the left and right Speed stickers 80 km/h at the rear and on both sides Load gauge for determining axle loads incl. load diagram One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle 2 INOX toolboxes under the loading platform on the left and right, approx. 600 x 350 x 600 mm 6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container 3 pairs of pocket rail strips mounted transversely in the loading platform, for plug-in rails approx. 100 x 50 mm 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading status An acoustic warning signal when reversing 2 LED reversing lights mounted on the rear panel HRM metallization (High Resistance Metallisation)

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, fork length: 1,200 mm, empty load weight: 8,970 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are overhauled in accordance with FEM-4.004 and current safety standards to ensure maximum quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics—each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after your purchase Test and consult on site now—we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPCD50 Drive type: Diesel Load capacity: 5,000 kg Tjdjy Rn N Iepfx Abtjb Year of manufacture: 2025 Operating hours: 0 Lift height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,600 mm Fork length: 1,200 mm Unladen weight: 8,970 kg Model designation: CPCD50 Cabin equipment: Adjustable cabin heater Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Rotating beacon Lighting: StVZO – Road traffic equipment for potential (limited) public road use: indicator lights, tail lights, reverse lights, reflectors etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to carriage

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, fork length: 1,200 mm, empty load weight: 8,970 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are overhauled in accordance with FEM-4.004 and current safety standards to ensure maximum quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics—each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after your purchase Tsdpfxey Rn N Uj Abtjb Test and consult on site now—we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPCD50 Drive type: Diesel Load capacity: 5,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,600 mm Fork length: 1,200 mm Unladen weight: 8,970 kg Model designation: CPCD50 Cabin equipment: Adjustable cabin heater Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Rotating beacon Lighting: StVZO – Road traffic equipment for potential (limited) public road use: indicator lights, tail lights, reverse lights, reflectors etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to carriage

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Tedpfx Aoy Ndz Rsbtob Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: used, machine/vehicle number: 32, mileage: 1,33,521 km, first registration: 01/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, emission class: euro6, number of seats: 2, Year of construction: 2022, MAN Tractor TGX 18470 4x2 Year of manufacture: 2022 Tedoyxr Auspfx Abtsb Euro 6 133,521 km Sleeper cab Automatic gearbox ID 32 Gas tank semi-trailer Van Hool Type: 1D0003 Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Tjdpfxoy I Ua Ie Abtsb Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Tsdpfxjzc D Ebe Abtob Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Condition: new, mileage: 50 km, fuel type: diesel, empty load weight: 2,540 kg, overall weight: 4,200 kg, tire size: 205/75 R17,5, axle configuration: 2 axles, wheelbase: 4,100 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, | Iveco Daily chassis, NEW VEHICLE!! | Automatic transmission installed, EURO 6 | Twin tires | Air suspension on the rear axle | Air conditioning, power windows, power mirrors with heating | Radio/CD, sunroof, spare wheel holder | Frame length: 4.20 m | Wheelbase: 4100 mm, also available with 3750 mm | Digital tachograph, rearview camera | Equipment list available upon request | Subject to errors, typos, and prior sale. Tjdpfx Aboy Niylstob

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles Todszk S Dmopfx Abtob * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: excellent (used), Stäubli Tsdpfxozix Uco Abteb Type: TX90L Robot / CS8C Controller Six-axis robot with control unit For sale is a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing, and training applications. Programming via VAL3. Technical Data – Robot Model: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg short-term Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical Data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Condition: used Scope of delivery: (see photo) - Stäubli TX90L robot arm - CS8C controller - Original teach pendant - Connection cables (Subject to changes and errors in the technical specifications and information!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Stäubli Type: TX90XL Robot / CS8C Controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including CS8C controller and original teach pendant. The TX90XL is suitable for pick & place, assembly, machine tending, parts handling, as well as automation, testing, and training applications. The XL version offers an extended reach for flexible deployment. Programming via VAL3. Technical Data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical Data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Tjdezix Uiopfx Abteb Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) • Stäubli TX90XL robot arm • CS8C controller • Original teach pendant • Connection cables (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 010325, COMPLETE TYRE RECYCLING LINE – SATURN / ELDAN A complete industrial tyre and rubber recycling line from reputable manufacturers Granutech Saturn and Eldan Recycling is for sale. The installation is sold as a complete, ready-to-dismantle and re-commission technological line. The line includes: SATURN 52-32 HT – industrial primary shredder (Heavy Duty Shredder) SATURN / ELDAN GRIZZLY 80 – secondary shredder ELDAN Granulator 160 – year of manufacture 1999 complete set of belt conveyors inter-stage conveyors 2 magnetic separators for steel recovery vibrating tables and material separation system discharge conveyors complete set of original control and electrical cabinets complete line control automation system Applications: recycling of car and truck tyres rubber shredding steel recovery production of rubber granulate Advantages: complete technological line machines from reputable manufacturers, Granutech Saturn and Eldan robust industrial design suitable for continuous operation transportation and re-assembly possible The machine can be viewed by prior arrangement. We provide assistance with dismantling and loading. Tedpfx Abszmucqetjb Additional photos are available upon request. INDIVIDUAL MACHINES CAN BE PURCHASED SEPARATELY

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm Tsdpoyzfxhefx Abtsb -Dimensions: 240/75/H75 mm -Weight: 2.2 kg

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Epson SureColor SC-F2100” production system. Item for sale: 1x Epson SureColor SC-F2100 Tedjzh Dcvjpfx Abteb We can easily configure the machine to your specifications. Feel free to contact us! Counter readings: Total: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). Tjdpezqiitofx Abtob ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: used, functionality: fully functional, mileage: 10,62,178 km, power: 456 kW (619.99 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 11,290 kg, maximum load weight: 18,710 kg, overall weight: 30,000 kg, tire size: 385/65 R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of beds: 2, total length: 7,500 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2008, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, navigation system, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, spoiler, Model: SCANIA R620LB6X4HHA V8 Manual PTO Leaf/Air First registration: 31.10.2008 Mileage: 1,062,178 km (original) Engine power: 456 kW Hydraulics for low-loader and tipper body Radio/cassette/CD/MP3 Air conditioning Electric windows Electrically adjustable exterior mirrors Multi-function steering wheel Tedpfsztfczjx Abtsb Sun visor Work lights Fog lights High beam Hazard lights Tool box Aluminum fuel tank Transmission: MANUAL, gear shift Access aid ABS Digital tachograph, front Sleeper cab Reversing camera Auxiliary heating Refrigerator Microwave Coffee machine Hydraulic connection Multi-function steering wheel Power steering Cruise control Sliding fifth wheel Gooseneck lifter Trailer coupling Emission class: EURO 5 Ad-Blue Number of axles: 3 Axle configuration: 6x4 Differential lock Wheelbase axle 1 to axle 2: 3900 mm Wheelbase axle 2 to axle 3: 1330 mm Tire size axle 1 (front): 385/65 R22.5 Tire size axle 2 (rear): 315/80 R22.5 Tire size axle 3 (rear): 315/80 R22.5 Leaf/Air/Air suspension Wheel cover Retarder/Intarder/Engine brake Curb weight: 11,290 kg Payload: 18,710 kg Gross vehicle weight: 30,000 kg Max. permissible trailer load, semitrailer: 60,000 kg Tank capacity: 400 liters Overall vehicle dimensions (length x height x width): 750 cm x 390 cm x 253 cm Fifth wheel height: 1350 mm All vehicles listed are advertised with valid roadworthiness inspection (TÜV) and emissions inspection (AU). Generally, these are foreign inspection certificates, which are sufficient for the issue of export license plates. For a valid TÜV and AU according to German standards, please contact us in individual cases. You are welcome to contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send a message via WhatsApp! German: We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Spanish: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Portuguese: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! French: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue! Italian: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Trade-in possible! Price is net! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping of your vehicle! Export plates available on request! We support you with export formalities, original data confirmation for country homologation, supplier‘s declaration, preparation of export documents, and customs plates production if needed. Inspection and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The purchaser is obliged to personally verify the condition, dimensions, and features of the goods/vehicles. All information provided without guarantee. Subject to changes, prior sale, and errors.

Condition: excellent (used), functionality: fully functional, mileage: 6,42,989 km, power: 206 kW (280.08 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,590 kg, maximum load weight: 7,410 kg, overall weight: 16,000 kg, tire size: 285/70R19.5, axle configuration: 2 axles, wheelbase: 4,700 mm, axle spacing: 4,700 mm, next inspection (TÜV): 03/2027, fuel: diesel, brakes: retarder, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,600 mm, total width: 2,600 mm, total height: 3,200 mm, loading space volume: 31 m³, loading space length: 6,450 mm, loading space width: 2,450 mm, loading space height: 1,980 mm, Year of construction: 2008, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, fog lights, full service history, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, tachograph, tail-lift, truck registration, Model: VOLVO FL-280 4x2 16Tons EURO5 with roll-up doors Tail lift: ZEPRO Z 200-136 MA Load capacity: 2,000 kg First registration: 25.11.2008 Mileage: 642,989 km Engine power: 206 kW Displacement: cm³ Auxiliary heater Antenna Radio/cassette/CD/MP3 Air conditioning Air-suspended, fully adjustable seats with seat heating Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beams Hazard lights Storage box Aluminum fuel tank Emission class: EURO 5 AdBlue Retarder/intarder/engine brake Drive configuration: 4x2 Differential lock Wheelbase between axle 1 and axle 2: 4,700 mm Tyre size front axle (1): 285/70R19.5 Tyre size rear axle (2): 285/70R19.5 Leaf/air suspension Wheel covers Unladen weight: 8,590 kg Payload: 7,410 kg Gross vehicle weight: 16,000 kg Overall vehicle dimensions (L x H x W): 860 cm x 320 cm x 260 cm Body dimensions, external or internal (L x H x W): 645 cm x 198 cm x 245 cm Cargo space volume: 31 m³ Tedpsztfhkofx Abtob All our vehicles listed are generally provided with valid technical inspection (TÜV) and emissions test certificates. Usually these are foreign inspection documents, which are sufficient for obtaining export number plates. For a technical inspection (TÜV) and emissions test according to German standards, please clarify with us on a case-by-case basis. You can also contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send us a message via WhatsApp! German (Deutsch): We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! العربية: نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! دری: ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Net price! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for your vehicle! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, export document preparation, and customs number plate creation, if required. Viewings and test drives are possible anytime, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: repair required (used), functionality: not functional, mileage: 7,53,555 km, power: 353 kW (479.95 HP), first registration: 04/2026, fuel type: diesel, empty load weight: 14,240 kg, maximum load weight: 18,260 kg, overall weight: 32,500 kg, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 3,750 mm, axle spacing: 3,750 mm, next inspection (TÜV): 04/2027, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: air, number of seats: 2, total length: 9,000 mm, total width: 2,550 mm, total height: 3,200 mm, loading space length: 6,500 mm, Year of construction: 2007, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, retarder, seat heater, second fuel tank, spoiler, tachograph, trailer coupling, truck registration, Model: SCANIA R480LB 8X4*4HHA ENGINE DAMAGE! 3-Pedal, JOAB L24, Steering+Lift Axle ENGINE DAMAGE – Engine is defective due to mechanical failure. First registration: 30.11.2007 Mileage: 753,555 km (original) Engine power: 353kW Engine displacement: 15,928cm³ Hydraulics (PTO) Auxiliary heater Todoztfk Eepfx Abtob Antenna Radio/Cassette/CD/MP3 Air conditioning 1x air-suspended seat with heating and fully adjustable Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Hazard lights Storage box Aluminum fuel tank Tank capacity: 500L diesel Emissions standard: EURO 4 Retarder/Intarder/Engine brake Transmission: Automatic Vehicle overall dimensions (L x H x W): 900cm x 320cm x 255cm Body length: 650cm Unladen weight: 14,240kg Payload: 18,260kg Gross vehicle weight: 32,500kg Differential lock Axle configuration: 8x4 Wheelbase axle 1–2: 3,750mm Wheelbase axle 2–3: 1,360mm Wheelbase axle 3–4: 1,310mm Tire size axle 1 (front): 385/65 R 22.5 Tire size axle 2 (rear): 315/80 R 22.5 Tire size axle 3 (rear): 315/80 R 22.5 Tire size axle 4 (rear): 385/65 R 22.5 Air suspension / air suspension Wheel covers Our vehicles are generally listed with valid technical inspection (TÜV) and emissions certificate in our ads. Usually, these are foreign test certificates, which are sufficient for export license plates. For full TÜV and emissions approval to German standards, please contact us individually. Feel free to contact us for further information and additional photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send a message via WhatsApp! German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English (English): We speak German and English, but feel free to send us a message in your language! Español (Spanish): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português (Portuguese): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français (French): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue! Italiano (Italian): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский (Russian): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Trade-in possible! Price is net! We can transport your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck (Germany) or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping of the vehicle! Export license plates available upon request! We support you with export formalities, provision of original data confirmation for country homologation, supplier’s declaration, preparation of export and customs documents when required. Vehicle inspections and test drives can be arranged at any time, including weekends, by prior telephone appointment! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the item/vehicle. All information provided without guarantee. Subject to changes, prior sale, and errors.

Condition: used, mileage: 1,32,360 km, power: 240 kW (326.31 HP), first registration: 11/2008, fuel type: diesel, overall weight: 39,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, color: yellow, gearing type: automatic, Year of construction: 2008, Equipment: ABS, crane, electronic stability program (ESP), TADANO FAUN ATF 50 G3 MOBILE CRANE | 40 M TELESCOPIC BOOM | 10 T BALLAST | 6X6X6 VIN: WFN3RUKR382042164 VEHICLE: Faun Tadano ATF 50 G3 Mobile Crane * Year of Manufacture: 2008 * First Registration: 11/2008 * German Registration * Mileage: 132,360 km * Operating Hours: 14,465 h * Drive: 6 x 6 x 6 * Tires: 385/95 R25 (14.00 R25) * Remaining Tire Tread: 1. 10/60 % // 2. 80/70 % // 3. 10/20 % * Mercedes-Benz 6-cylinder OM 624 engine * 240 kW / 326 hp * ZF AS Tronic transmission * 12 Forward Gears / 2 Reverse Gears * Central lubrication system for the upper carriage CRANE STRUCTURE: 40 m Telescopic Boom * 5-section main boom * 10 t Counterweight * Load chart available * Outrigger diagram available WEIGHTS: * Total Weight: 39,000 kg * 10t Ballast ACCESSORIES: Complete Documentation * Inspection books * Operating manual * Spare parts drawings * 4 new spare tires * 1 spare wheel on rim * 1 new hoisting rope * 1 used hoisting rope Tedpezd Iixefx Abtob * Extensive spare parts package * Various electrical, mechanical, and hydraulic parts OTHER: From 1st owner * Very good overall condition * Regularly maintained * Last maintenance at 132,326 km / 14,462 operating hours * MOT: 06/2027 * Vehicle Inspection: 12/2026 * Crane Safety Inspection: 05/2027 * Tachograph Inspection: 11/2026 -- We will be happy to assist you with loading and organizing the transport. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! -- WHO ARE WE? -- Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! -- OUR SERVICE FOR YOU -- Loading of vehicles We will be happy to help you with loading your purchased vehicles. Organization of special transports We will be happy to help you organize special transports. Day registrations / Export license plates We will be happy to help you obtain export license plates / short-term license plates. Handling of customs formalities We will be happy to help you with handling customs matters.