Used Darex Darex M5 for sale (615)

Condition: used, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,980 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm Pjdpfx Aloy E Uhgewsrb · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. Prodpfxoy Sbc Re Alwsb The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: used, TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy Podpfxey Tp Dxe Alwsrb

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Prjdpfxjy U Urds Alwjb Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Prjdpfsy Nfz Esx Alwsb Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 5850 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2026, color: grey, overall weight: 15,000 kg, loading space width: 2,500 mm, loading space length: 5,500 mm, loading space height: 1 mm, mileage: 1,001 km, first registration: 01/2026, gearing type: other, driver cabin: other, Vehicle location: Bovenden, lashing points Predpfx Alozbm Icjwsb Body: Roll-off platform with lashing points, with stakes, ARCHIVE IMAGES! Mounting brackets for hook lift systems according to DIN 30722-1, Floor pan made of 5mm steel, front panel made of 3mm, checkered steel floor, INP 180, sloped ramp, warning markings, 4 lashing points per side and 2 lashing points on the front panel RAL 7016! With removable stakes, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Machine type: Two-rail portal crane / crane system Load capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. This system is suitable for assembly work, production, mechanical engineering, maintenance, workshop operations, logistics, and general lifting tasks in an industrial environment. Technical data Span: 5,890 mm Column spacing L: 5,590 mm Column spacing B: 5,890 mm Girder length: 6,390 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal girder: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Classification according to EN 15011: HC2 / S2 Steel construction group: 18/30/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection rating: IP55 Weight with 5 m lift: 65 kg Manual trolley Type: SiCO-HF 2000 A Year of manufacture: 2020 Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Floor control Main disconnect switch Steel column and girder structure Crane test book available Hoisting equipment test book available EC Declaration of Conformity available Assembly and operating manual available Predozgv U Uopfx Alwjb Shipping data Longest component: approx. 6.4 m Heaviest component: approx. 300 kg Condition Used System was installed and in operation. Documentation and test records available. Scope of supply VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Column and girder structure Control / operating elements Test books and documentation Accessories according to existing documents and images The machines, tools, and other items visible in the pictures, which are not explicitly described, are not included in the scope of supply. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to “see”, allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans and shares the same tasks, without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a genuine plug & play solution. Prodpfjzg Eyasx Alweb Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2006, CNC Swiss turn Machine type: Citizen K 12 VII 1F7P Control: Fanuc Year: 2006 SPECIFICATIONS Main Spindle Max. turning length: 200 mm Turningdiameter: 12 mm Bar capacity: 12 mm Spindle speeds: 15.000 rpm Max. front thread diameter: M8 Spindle diameter: 16 mm Max. Machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Max. Drilling diameter for back machining: 6 mm Max. Thread diameter for rear machining: M5 Spindle speed, counter spindle: 10,000 1/min Tool set, number of tools: 8 Speed of the driven tools: 6000 rpm Psdpfszim Hasx Alwjrb Powered tools for the rear side not available

Condition: good (used), Year of construction: 2007, Horizontal machining center OKK Rotopalette Type HM500 Year 2007 CNC Fanuc Series 310 IS-model Tool magazine with 60 tools Chip conveyor Approximately 26 tool holders with ISO 50 connection Tilting and forklift-compatible chip bin, GOUBARD Inspection points with shelves and lighting, fan Tool displays, double-sided (60) Psdpezr Ik Sjfx Alwerb Buffer tank

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery Pjdpozvqi Sofx Alwerb - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: new, pneumatic linear drive or slide cylinder from Festo. Festo DGPL-18-750-PPV-A-KF-B Part number: 161977 Max. operating pressure: 8 bar The DGPL is a pneumatic cylinder without a piston rod and with integrated guidance. Compressed air drives the slide back and forth along the long guide rail. The 750 indicates a stroke of 750 mm, and the 18 indicates the size/piston diameter class. Typical applications include positioning, moving, or feeding workpieces in machines and automation systems. Festo data sheet for part number 161977 Type DGPL-18-750-PPV-A-KF-B. • DGPL = pneumatic linear drive without a piston rod with integrated guidance. In this version, it is a ball bearing guide. • 18 = piston diameter 18 mm. • 750 = in your specifically labeled unit, 750 mm stroke. According to Festo, the series can generally be configured with strokes from 10 to 1800 mm. • PPV = pneumatic end-of-stroke cushioning, adjustable on both sides. The slide is thus pneumatically braked shortly before its end positions; Festo specifies a damping length of 16 mm here. • A = version with position detection/proximity switches; in this series, sensors can detect the position or end positions of the piston. • KF = ball bearing guide (in contrast, for example, to GF, which is a slide guide). It ensures precise and robust guidance of the slide. • B = variant/series identifier of the DGPL version. Important data for your drive Prodpezyltyjfx Alwsb It is double-acting, meaning it is actively moved in both directions with compressed air. The permissible operating pressure is 2–8 bar. At 6 bar, Festo specifies a theoretical force of 153 N in both directions – approximately equivalent to the weight of 15.6 kg, although the actually usable force is lower. The pneumatic connections are M5. Permissible ambient temperature: -10 to +60 °C. The two compressed air connections drive the internal piston. The piston is mechanically connected to the slide, which runs on the outside, via the longitudinal slot. This provides 750 mm of linear movement without a 750 mm long piston rod, which would have to extend an additional distance out of the cylinder.

Condition: new, weight max. 0,25 t stroke 4000 mm Podpfsh Un Hdsx Alwsrb Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table Prjdpfxoy Umdle Alweb - Tapping head can be fixed with magnetic quick-action insert

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). Prsdpfx Aeyy Rn Sjlwsb * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system Psdpfx Alsvvl Ugoworb -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: used, Year of construction: 2020, MAJA ESM 5550 Deboning Machine / Scaling Machine (Year of Manufacture 2020) Description: For sale: a professional MAJA deboning machine in top condition. The machine runs perfectly, has been regularly maintained, and is ready for immediate use. Ideal for butcher shops and meat processing plants. Technical Data (according to the nameplate): Manufacturer: MAJA-Maschinenfabrik Type: ESM 5550 Year of Manufacture: 2020 Serial Number: M-55334 Prjdpfjzdf Rnox Alwob Connection: 400 V (high voltage) / 50 Hz Power: 0.75 kW Material: Made entirely of stainless steel Extras: Includes a mobile base (on wheels)

Condition: new, cutting pressure: 55weight approx.: 1.520heigth: 1880motor: 5,5width: 1500length of knive: 317throat depth: 255stroke: 60  5 working stations  one foot pedal  hydraulically driven  Pedpfx Aljttc Upowjrb table at punching and notching station with gauge  user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2025, Screen drums suitable for all common screening machines such as Doppstadt SM 314/ SM414/ SM518/ SM618/ SM620/ SM720/ SM 725, Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, 20.72, Terex, Neuenhauser, and others. - Manufactured according to your specifications: - Perforations (including variable hole patterns within the drum) - Square or round perforations - Offset or straight layout - Minimal web widths - Welded-in spiral flights - Available in various material thicknesses - Perforated sheets with sharp edges, highest quality - Perforated sheets made from special steel We deliver our drums free to your door. Pjdexn A D Sjpfx Alwjrb Many models available from stock without waiting time.

Year of construction: 2025, condition: new, Screen drums suitable for all common screening machines such as Doppstadt SM 314/ SM414/ SM518/ SM618/ SM620/ SM720/ SM 725, Terra Select T4-T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar 18.47, 20.55, 20.72, Terex, Neuenhauser, and others. - Manufactured according to your specifications: - Perforations (including variable hole patterns within the drum) - Square or round perforations - Offset or straight layout - Minimal web widths Predpfx Aexn A E Ajlwob - Welded-in spiral flights - Available in various material thicknesses - Perforated sheets with sharp edges, highest quality - Perforated sheets made from special steel We deliver our drums free to your door. Many models available from stock without waiting time.

Condition: used, mileage: 70 km, power: 9 kW (12.24 HP), empty load weight: 1,910 kg, Year of construction: 2022, First registered: July 25, 2023_____Basic equipment: - Ultra high performance lithium iron phosphate battery including battery heating- 4G vehicle diagnostics including technical support- Avas system- Windshield heating- Closed cabin with glass doors- Left-hand drive- Standard color white (RAL 9010)- All-weather tires- N1 road homologation- Charger 220V 16 A (charging time max. 6.5 hours)Special equipment:- Battery: 72V LiFePO4 (14400 Wh) Range*132 km (WLTP) Max. speed 55 km/h Gear ratio 12.5:1- Power steering- Webasto AirTop 2000 heater including 10 liter tank- Radio with Bluetooth, AUX, hands-free system and rear view camera- Rotating flashing light- Hill start assist- USB charging port- Lockable tool box- Flatbed construction in aluminum construction - Flatbed frame made of aluminum profiles, powder-coated in anthracite Aluminum side walls, 35 cm high, foldable on 3 sides - Square stanchions, firmly welded at the front and rear - Driver's cab protection made of 2nd side wall and steel mesh, with preparation for side wall attachment - Airline rail profile as outer profile of the flatbed - Airline rails on driver's cab protection - Lashing adapter for airline rail - Flatbed floor screen-printed floor plate 15 mm - Tarpaulin frame made of aluminum profiles can be inserted into stanchions, height approx. 120 cm, can be opened on 3 sides, at the back with a cap closure made of expander rope and swivel on the side walls - Robust truck tarpaulin - Color: anthracite - Tarpaulin on the side as a roller blind, tarpaulin side rolls up automatically - 2 rotating beacons, mounted on the roof of the tarpaulin structure, Storage location: Apleona Südwest GmbH Prjdpfx Asni Ia Djlweb

Condition: used, Year of construction: 2011, Duplo 5000pro Booklet maker. Year 2011 Count 3436444 1 pervious owner, who brought new direct from Duplo. Has been on a maintenance contract. I have a video in production. Machine ready to go in my warehouse, I can put on pallets for transport if needed. Machine sold ex works. The Duplo System 5000 Pro is an automated high-speed collating and bookletmaking system. Key specifications include maximum collating speeds up to 9,800–10,000 sets per hour, bookletmaking speeds up to 5,000–5,200 sets per hour, and support for up to 60 collating bins using DC-10/60 Pro suction towers Predpfxszq S N Ao Alwsb Collator Specifications (DC-10/60 Pro Towers)Number of Bins: 10 bins per tower (connects up to 6 towers for a total of 60 bins).Feeding System: Advanced air-management suction sheet feeding with adjustable airflow on each shelf.Paper Size: Min: 120 x 148 mm, Max: 350 x 500 mm.Paper Weight Range: Supports 50 gsm to 300 gsm stock.Collating Speed: Up to 9,800 – 10,000 sheets/sets per hour.Bin Capacity: 65 mm shelf/bin capacity. 5000pro Booklet Maker Maximum Sheet Size: 350 mm x 500 mm (Up to 356 mm x 508 mm with certain configurations).Minimum Sheet Size: 120 mm x 170 mm.Maximum Booklet Capacity: Up to 25 sheets of 80 gsm paper (creates a 100-page booklet).Maximum Stitching Thickness: 5 mm (approx. 50 sheets of padded stock)

Condition: new, Year of construction: 2026, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. Psdpfx Ajdt Ap Aolworb The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: used, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,980 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm Podpsy E Ucwsfx Alworb · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Year of construction: 2013, operating hours: 42,479 h, condition: good (used), functionality: fully functional, machine/vehicle number: M-iQ K-M54 V6 P6, For sale is a used, fully functional basket conveyor dishwasher from MEIKO. Technical specifications: Manufacturer: MEIKO Model: M-iQ K-M54 V6 P6 Year of manufacture: 2013 Length: approx. 5.30 m Basket dimensions: 500 x 500 mm Robust stainless steel construction Suitable for professional use in large kitchens, canteens, hotels, and catering establishments Condition: The machine is in used, well-maintained, and fully functional condition. The conveyor belt has been recently renewed, meaning that a significant wear part has already been replaced. The M-iQ series from MEIKO stands for high washing performance, efficient energy consumption, and reliable continuous operation in the professional kitchen environment. Prodpfsza A T Ejx Alwob Inspection is possible by arrangement. I will gladly send further photos and technical information upon request. Used item sold without warranty, unless legally required.