Used Ksm 2600 for sale (1,469)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Iaodpfovz Hnrjx Adwjl Weight 230 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Weight 250 kg Total power requirement 3,5 kw Iasdsvz Hkgepfx Adwel

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Iodpfsiuld Dex Adwjal Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM Iedow Ty Dujpfx Adwoal year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: excellent (used), Year of construction: 2015, For sale is a fully functional and very well-maintained gas burner from the brand WEISHAUPT WM-G20 (2600 kW), complete with DUNGS DN65 gas train. WEISHAUPT WM-G20 (2600 kW) - Output: 350–2600 kW - Version: ZM - Year of manufacture: 2015 - Delivery available upon request - All technical data can be seen in the pictures Preferred sale to dealers, commercial traders, or for export. Ijdpeign Izsfx Adwoal All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: good (used), Year of construction: 2017, BCS Autobox 2600 + Multicut 3 Year 2017, Ijdpfx Adsr Nx Unjwoal Max. sheet width: 2600 mm Auto set slotting tools Auto set creasing tools Auto set. Tool less size change Feeder with capacity 300 mm height of blanks Typical set-time of 1 minute High speed up to 100m/min Over 50 Fefco box styles possible Handles singe to double wall corrugated board (max. 10 mm) Touch Screen Control panel for easy programming of new or stored box size and styles

Condition: new, Year of construction: 2025, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. Iasdpfom Tv D Uex Adwsl - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Iodpox Nrmbsfx Adwjal • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: good (used), functionality: fully functional, total width: 520 mm, total height: 1,135 mm, total length: 700 mm, working width: 5 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 49 kg, power: 1 kW (1.36 HP), Knoedel cutting machine Sama Mobile base frame with container Connection 400V, 16A-CEE plug Iaodpfxjt Ezi Uj Adwjl Used machine Delivery service Many more bakery machines in stock!

Condition: used, Year of construction: 2006, functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Iajdpjumlinjfx Adwel Weight 3.800 kg CE marking Total connection 10 kW

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with support ribs and table extension on both sides -Clamping area: total 6000 x 2600 mm -Height: 295 mm -Table extension: 300 mm on both sides -Groove width: 30 mm Iaodpfx Adendzx Uewel -Groove spacing: 500 mm -Transport dimensions: widening dismantled on one side 6000/2300/H590 mm -Weight: 10000 kg

Condition: good (used), functionality: fully functional, total length: 2,000 mm, total width: 850 mm, total height: 1,400 mm, Stripper/Casing remover is used to remove casings without damaging sausages Brand Townsend Iajdpfx Asv Aadvedwel Model 2600 Dimensions 2000x850x1400mm

Condition: new, Year of construction: 2025, CIDAN FS folding machines are phenomenal combinations of raw strength and flexibility. With powerful motors that fold with fantastic precision and to exact measurements this machine can do a lot more than just bend. Together with the ProLink W or nuLINK control system and frequency control of the machine’s movements you have everything you need for contract manufacturing with high quality and productivity. CIDAN FS folding machines are true workhorsees with a whole lot of benefits. - Crowning adjustment as standard always gives the perfect folding result - Two folding beam rails with width 7/10 mm (0.275″/0.394″) and 20 mm (0.787″) as standard - Fast, reliable, and user-friendly - Choose between three control systems, EasyLink, nuLINK or ProLink W, all with plenty of features Iaedpfx Adjm Tv Hzswjl - Multiple backgauge stops for both small and large parts across the bending length of the machine (Click here to read more about our back gauges.)

Year of construction: 2004, condition: good (used), Built in: 2004 Cutting width: max 2.600 mm Iaedpjpfb Rtsfx Adwel Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm machine depth: 4.180 mm Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40 hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Equipment • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives

Condition: ready for operation (used), Year of construction: 2007, The Marel Townsend 2600 peeler removes casings without damaging the sausages and is ideal for small and medium-sized meat processing operations. Iajdewg H Hdepfx Adwel The device is suitable for both standard and cocktail sausages. Dimensions: 13 mm to 36 mm diameter Steam operated – you will need steam for the machine to work.

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Iaedpfot A Nr Sox Adwjl Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: good (used), functionality: fully functional, 1 fixed upper front blade 1 movable lower rear blade Iaodpfxow D Nqge Adwel opening: 4500 mm rear stop, lasers

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal The GoTx® fixation modules are Iodpsv Dcc Rjfx Adwjal designed for uninterrupted production and media is NOT touched during transfer fixation process.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Isdpfx Adox Updnowoal Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Isdpfx Adjnh Nu Uowjal

Condition: used, Year of construction: 2015, operating hours: 2,600 h, CE mark: yes Serial number: HCMDCK50J0030xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21350 Specifications: 2015 model 2600 hours Weight: 22300 kg 122 kW Certified until 09/26 Belt width: 60 cm Machine width: 300 cm App-controlled webasto Camera Central lubrication Tooth tray Sanding bucket Rotor tilt Chassis (see pictures) Iedpfx Asxdhxmodwoal Air conditioning/ac Ready for delivery   Description: 2015 Hitachi ZX210LC with 2 buckets for sale. The excavator has run for 2600 hours. Certified until 09/2026. Ready for delivery. Hours: 2600 Own weight: 22300 Year controlled: Yes Year controlled until: 09/26 Width: 250 Length: 1272 Kw: 122 CE: Yes Model: ZX210LC

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00550, load capacity: 12 kg, arm reach: 1,850 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 2600-12/1.85 manufactured in 2017.03. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Iodpfx Adsx Tiamsweal Model: 2600-12/1.85 Model Number: IRB Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 12 Reach (mm): 1850 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 284   Controller: IRC5 Year of Manufacture Cabinet: 2017.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Control type: Beckhoff - Control: CNC - Travel X: 3000mm - Travel Y: 1500mm - Resonator type: Hypertherm Powermax 105 Iaedpfxexrz Hme Adwjl - Max. sheet thickness: 32mm - Power: 16.8kW - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), machine/vehicle number: 9212071, Sanding width: 1300 mm Working height: 880 mm (fixed) Maximum workpiece thickness: 3–140 mm Transport bed: With individual conveyor belts Drive: 3.0 kW three-phase motor, incl. extraction unit Feed speed: 4.5–22 m/min, adjustable Units: Cross/longitudinal/longitudinal/brush Brush roller unit: Centrally height-adjustable Diameter: 150 mm Motor power: 1.5 kW Brush bristles: Fibre Cross sanding unit: Wear-free braking system, pneumatic belt tensioning, belt run monitoring, pressure lamella belt system, intermittent belt cleaning device Sanding belt dimensions: 4900 x 150 mm Belt speed: 12 + 24 m/s Motor power: 13 / 17 kW Longitudinal sanding unit: Continuous, electronic control of sanding belt speed via frequency converter, wear-free braking system, pneumatic belt tensioning, intermittent belt cleaning device, infrared belt tracking, counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt speed: 0.3–12 m/s Motor power: 11 kW Iaedpfsyakl Njx Adwol Graphical control terminal: For entering machine settings, incl. numeric thickness adjustment, display for faults, workpiece passage, and feed speed Electronically controlled pressure beam Distance between control rollers: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adjust to the shape of the passing workpieces Weight approx.: 5500 kg Required space: approx. 2550 x 2675 x 2400 mm

Year of construction: 2026, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable. Iodpfx Adebcngiowsal