Used Davi Mcb 4000 X 6/4 Mm for sale (1,19,991)

Condition: good (used), Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS The beams have 2 holes each on the top, bottom, and front, with a diameter of approximately 16 mm. These are used for the diagonal bracing. Guedpfxjlgzqcs Al Ajd Included in the scope of delivery: 01x Pallet racking beam, used Material color: orange U-profile: 150 x 50 x 3.00 mm Design: End beam Agraffe: 4 HK (hooks) Clear width: approx. 1,400 mm 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 11,945 mm Number of bays per racking row: 04 units, each 2,880 mm Number of levels plus base level: 04 units Included in the scope of supply: 05x Pallet racking uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (welded frame) 6,640 mm high 870 mm deep 32x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per beam pair: 1,600 kg with evenly distributed load 64x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out 20x Heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-bolt installation: M 12-13/95 10x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs Gusdoi D Em Aopfx Al Aod with information on bay and frame loads, manufacturer and batch number Dimensions: 80 x 220 mm

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Gusdpfsrxb R Nsx Al Asd Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: Shelf panels, used Material color: sendzimir galvanized Total width: approx. 994 mm Total depth: approx. 594 mm For frame depth: approx. 600 mm Guodpfx Asy Ex Rlol Ajd Height: approx. 30 mm Weight per unit: approx. 5.16 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipping of this item is possible at extra cost, which can be specified upon request depending on the place of delivery or delivery scope.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm Here we offer a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench stands, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 04x Workbench crossbeams, used Material color: orange Box profile: 85 x 40 mm Crossbeam type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) Gjdpfx Ajhm Stzsl Aoud 01x Chipboard, second choice, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Gsdpfxoyk T E To Al Asud Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Guedpfjwwviiox Al Asd Unit weight: approx. 2.52 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Gujdswl Ullopfx Al Aed Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 26,770 mm Number of bays per racking row: 09 units, each 2,880 mm Number of levels plus base level: 04 units Included in the scope of delivery: 10x Pallet racking uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (welded frame) Gsdsi D Engspfx Al Asud 6,640 mm high 870 mm deep 72x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per pair of beams 1,600 kg with evenly distributed load 144x Safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting 40x Heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-bolt mounting: M 12-13/95 20x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 80 x 220 mm

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm Guodewwuchjpfx Al Asd for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.600 mm Number of bays / shelf row: 07 pcs á 2.400 mm Number of levels plus floor level: 03 pcs. Included in delivery: 08x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 42x pallet rack beams, second-hand material color: green Gujdpfx Alsmxlnie Aed INP profile: 80 x 42 mm clear width: 2.400 mm max. load per truss pair 2.400 kg with evenly distributed load 84x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 32x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 16x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), The scope of delivery includes: Guedsi Euw Espfx Al Asd 1x shelf connector/flat bar, used Length: approx. 441 mm Center-to-center hole distance: approx. 400 mm Hole diameter: approx. 10 mm Cross-section: approx. 30 x 6 mm Surface: galvanized Weight: 0.62 kg | piece

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Guodpfxeyk R Rms Al Aod Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: as good as new (ex-display), The scope of delivery includes: 1x waste container, 2nd choice Manufacturer: SSI Schäfer Volume: 770 liters Depth with lid closed = 770 mm Depth with lid open = 840 mm Height 1,360 mm with lid closed Overall width: 1,380 mm Material color: black Tires: 4 tires (2 with brakes) Godpfx Alek Nl Hus Ajud Material: Polyethylene (PE) Weight: 68 kg Note: The usable width and usable depth taper towards the bottom. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: blue Weight per unit: 1.59 kg Gujdpfx Aow E D Iiel Ajd General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS Godpfx Aljt Ibk Ro Asud The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,000 mm Max. load per pair of beams 2,200 kg with evenly distributed load 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We are offering a used workbench from the manufacturer Jung Heinrich for sale. The scope of delivery includes: 02x Workbench frames, used Material color: blue Frame profile: 76.2 - 100 mm Frame height: 900 mm Frame depth: 800 mm Incl. cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x Workbench crossbars, used Material color: orange Box profile: 85 x 40 mm Crossbar type: GN85x41mm Clear width: 2,775 mm 08x Locking pins, used Design: fully galvanized 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x Chipboard, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x Drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes. The material color may vary. The chipboards may be coated or uncoated. Guodpjhm Stljfx Al Asd - The workbenches are supplied unassembled; - The workbench frames are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: S 4 Included in delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Including horizontal and diagonal braces, base plates. Gujdpfoxxq Tvox Al Ajd The uprights are pre-assembled (bolted truss construction) Height: 11,050 mm Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping of this item is associated with additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Condition: new, Welding electrode for contract welding Manufacturer: Duramit W4 Material: 1.2567 Diameter: 6 mm Gjdpfjhhyitox Al Aoud Length: 450 mm 40 pieces per package 6 packages available 95 euros per package

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Guedpfx Aeutuy Ael Aod Options / surcharges: Pressure control valve: ¤400.00 Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 Gjdjw Ty S Sepfx Al Ajud - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Gujdpox Iitisfx Al Aed Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Side bending aid Swiveling bending aid on top Condition: Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 Gusdpfx Ajy Nypkel Aed coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: new, pressure: 400bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 6855x2780x3615weight approx.: 31.4004 axes (Y1, Y2, X, R): Ja alle Achsen über die Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 45Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Guodpfod Ehh Sex Al Asd

Condition: new, plate width 4000 mm plate depth 1500 mm plate height 310 mm weight 4930 kg dimensions of the machine ca. 4000 x 1500 x 310 mm GERD WOLFF clamping plate 4000 x 1500 x 310 mm Guodpfxsymf T Us Al Aed If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 4930 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III