Square profile Square hollow profile Steel

Vierkantrohr Stahlrohr Profilabm.: 140 x 140 mm /Höhe: 5.560 mm

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, overall weight: 1,410 kg, input frequency: 50 Hz, nominal power (apparent): 500 kVA, type of output current: three-phase, Equipment: type plate available, 6 months warranty Dodpfxownfx Ue Ag Aoup

Condition: good (used), Electric transformer E.R.E 1 250 kva Year 2002 Dedpfx Aer I Sm Eog Aoup

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Dsdpfenfu Dyex Ag Ajup Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Djdpfsrdwlksx Ag Aeup Type: CMG 268 Waste compactor

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose Dodpfx Aget Nfare Aoup • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Year of construction: 2020, condition: new, Gravity heating system Thanks to the use of a gravity heating system in SPARK series gravity furnaces, we can boast of a good result of temperature homogeneity, our tests have shown that the air temperature uniformity in our gravity furnaces, with the appropriate arrangement of elements, does not exceed ± 5 ° C! We owe the result to our heating element assembly technology. Rapid heating SPARK series gravity furnaces have specially designed heaters that quickly give off heat, thanks to which our furnaces heat up quickly. We owe rapid heating to the applied seals and insulations, the specially profiled gasket does not contain asbestos and is safe for the user. Optimization of the insulation, no contact between the furnace chamber and the casing minimizes heat loss and saves power. Depending on the model, our furnaces heat up to 8 ° C per minute. Transport system The SPARK series ovens are equipped with two bottom transport carriages as standard. In response to the market demand for inexpensive solutions, we have developed a manual bottom transport system that allows you to transport large dimensions with a minimum of force. Our system allows for optimal use of the entire surface of the furnace and ensures high cleanliness of the painted elements. Thanks to the use of two trolleys, the trolley moving around the hall does not contaminate the interior of the furnace. The top trolley is used to enter the furnace itself. The use of one trolley causes the introduction of contaminants from the floor into the furnace chamber, our system eliminates this problem. Duedpfx Agsfy T R Dj Asp

Condition: good (used), Year of construction: 2005, functionality: fully functional, Circuit breaker 12kV /630A, VD4 /P manufacturer ABB, with protective relays. 9 pcs. Djdpfxev Img Us Ag Aeup

Condition: good (used), Year of construction: 2013, 14 pcs medium voltage vacuum circuit breaker to open cell ( on wheels ) 24kV, 1250A, 25kA/1s, 3 phase, 2 pcs open coil 110V DC, 1 pc close coil 110V DC, motor drive 220V AC/DC, producer ABB model VD4.24.12.25, rok výroby. Dujdpfsvv Huhsx Ag Asp

Year of construction: 1996, condition: excellent (used), Medium voltage panels metal clad air insulation - Un=6kV 1250A 40kA manufactured by ABB, r.v. 1996, type SR7 / 2, components VD4 of ABB circuit breaker, SPAJ protections, SPAU ABB, control voltage 220VDC, fully functional, very good condition. 2 x incomer with voltage measurement, 2 x panel voltage measurement , 6 x outlet panel, 1 x coupling (2 fields) total 12 fields Dujdog Ur Nfspfx Ag Aop

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Dsdpevxth Hsfx Ag Ajup Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg