Used Demag / Eldro Typ - Th806/60 - Ed 1250/60 for sale (28,446)

Condition: excellent (used), 2 identical DEMAG hoists / electric wire rope hoists P625 H8 2/1, load capacity 5t, and P35 H8 2/1, load capacity 5t. Both equipped with fine lifting FG24 and 5t lower block. Both units underwent a complete general overhaul at the same time in 08/2003! Stored since then, without documentation, though the gear type plate contains the relevant information. Laedpfx Ajv T Twkspdsg

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Ledpezxbk Eefx Apdoag

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Laodpezamf Sofx Apdog

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Ledpfxezt Ih Ts Apdsag Control: NC4

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm Laodpfomb U Slox Apdjg - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Condition: as good as new (ex-display), Year of construction: 2020, Kannegiesser belt conveyor belt conveyor GF 1250-680-600 RA1816 Kannegiesser conveyor belt is from 2020 and is in mint (used) condition. The belt conveyor has a motor drive from Bauer with frequency converter to regulate the conveyor speed. The pictured supports are included in the delivery. Technical data: Conveyor length (NL): 1250 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height(BH): 800 - 1130 mm ascending Number of support feet: 2 pieces Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,37 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 07/2020 Special feature / accessories: 1x Bauer gear emtor with frequency converter 2x return pulley cover Optionally available: Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Lodpfx Apjwblk Dsdsag We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: repair required (used), functionality: fully functional, Demag T12 / KBA125 / FG08 / KBA80 New! Ljdpfeywk Erox Apdoag T12 i = 24.8 KBA125 B-4 FG08 i = 9.87 KBA80 A-4 Price on request

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Machine Benefits Technical Machine Benefits • Connected load: 84 kw • Nominal voltage: 3 x 400 v • Control voltage: 24 v Lasdsx U Tihjpfx Apdog • Safety distance: 310 mm • Overrun time: 128 ms • Overtravel: 62. 3 mm • Max platform height: 750 mm • Platform dimensions: 1850 x 1300 mm • The systems are fully functional and were used in 2/3-shift operation between 2017 and 2022. • The spray cylinders were resealed and the insulation panels replaced in 2023. Extra Information Machine still under power

Condition: used, RADIAL CSEPEL Ledpfx Aperiu Eyodsag TYPE: RF50/1600 TYPE: RF50/1250 20 AVAILABLE PIECES

Year of construction: 1985, condition: excellent (used), machine/vehicle number: 20020298 EG, DEMAG KBK crane canopy crane runway with dimensions approx. 10.5x9m (9m bridge - double girder crane) Payload / lifting capacity 500 KG - 0.5 tons Technical data of the system: Crane runway made of Demag KBK2 rails with internal power supply System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable carrier, brackets/hangers etc. incl. Demag PK2 500KG chain hoist - lifting height approx. 5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Lasdpfx Ajty S T Uopdsg Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 2014, operating hours: 28,110 h, functionality: fully functional, machine/vehicle number: Robot: 4600-101310 & 4600-101311 / Controller: 4600-101312, overall weight: 1,130 kg, load capacity: 60 kg, arm reach: 2,050 mm, ABB industrial robot dual system featuring 2x IRB 4600-60/2.05 Type C robots and an IRC5 M2004 dual controller for industrial automation processes. The system is used and has been tested. Typical applications include handling, assembly, machining, and synchronized automation tasks. The payload capacity is 60 kg with a reach of 2050 mm. It was manufactured in 2014 and has 28,110 operating hours, running RobotWare software version 5.15.9100.10. The system is equipped with an ABB FlexPendant teach pendant, cable sets for motor and data connections, and the following software options: MultiMove Independent 604-2, Multitasking 623-1, PROFINET IO m/s, DeviceNet Master/Slave, PC Interface, and HOMEPOSRUNNING V6.03. Lodozamk Ijpfx Apdeag

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Lsdsyguk Aspfx Apdjag Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Lajdpfjy N Amxjx Apdog Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel

Condition: used, Year of construction: 2013, operating hours: 12,310 h, functionality: fully functional, overall weight: 575 kg, load capacity: 45 kg, arm reach: 2,050 mm, ABB industrial robot featuring an IRB 4600-45/2.05 Type C manipulator and an IRC5 M2004 controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 45 kg and a reach of 2050 mm. Manufactured in 2013, it has accumulated 12,310 operating hours and is running RobotWare software version 5.15.0266.00. It is equipped with a FlexPendant teach pendant, two connection cable sets, and a power cable. Laedpfxozamidj Apdsg

Year of construction: 1990, condition: used, machine/vehicle number: 001435U, For Sale Ljdpfonk Uyasx Apdoag 1x Used single-girder overhead crane 20.245mm x 2x 3.200 kg.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Ljdpjzy Imisfx Apdjag Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Ljdpfx Aemmbn Topdjag Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Laedpfezy Inaex Apdjg Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Ledsw Hg Nlspfx Apdsag Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Year of construction: 1972, condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG incl. cable towing, undercarriage etc Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Item location is 75053 Gondelsheim Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Lasdpfx Aorwkbuopdog Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. Laodpfx Apjzcunaodjg A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. The machine is immediately available and ready for sale. Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Laedpfx Aszy Imcspdsg Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc. Lodpfxozxblpo Apdoag

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. Laedpfx Apozlb Abodjg A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Versatile applications The machine is suitable, among other things, for processing: ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA400077, Technical data: 1 Zasche / Demag ZHD 500-8/4.5 pillar jib crane, rated load 500 kg Load capacity at full outreach: 500 kg / 0.5 tons Height: approx. 4.9 m, bottom edge of jib: approx. 4.5 m Jib outreach: approx. 8 m, hook height: approx. 4 m Overall weight: approx. 1200 kg Equipped with Demag PK chain hoist 500 kg Lodpsxvmn Defx Apdsag Connection: 400V 16A, slewing range 360° Crane is dismantled and immediately available Location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition, see pictures Shipping by freight carrier or collection by appointment