Used Desktop Metal 3D Printer + Debinding Machine, Etc. for sale (71,300)

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Kdedpszhlr Eefx Ahhsr Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kdjdpfxeuxuv As Ahher

Condition: used, functionality: fully functional, machine/vehicle number: G7000046, Year of construction: 2021, operating hours: 12,000 h, Stratasys Objet500 dental printer Kdjdpfezd Ruqex Ahher Purchased in July 2021. Original price: €87,500 Regular maintenance performed by Stratasys. Maintenance reports available. Excellent condition, fully functional. All print heads are installed in the printer and are functional. Machine ready for pickup.

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Sheet metal cleaning machine Jeros 5015/828 for 2-edge sheet metal short side raised stainless steel design with oiling function DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Used machine Kdedpfx Ahsyaklcehsr Come and visit us!

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 (M) -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. --Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line. Ksdpfx Ahoiih Aashjdr

Condition: new, Year of construction: 2024, functionality: fully functional, 12 months warranty Kdodjzldr Eepfx Ahhor

Condition: good (used), Stock number: 3075 Manufacturer: Alzmetall Machine number: 11495 Type / Model: AB3 ES Quill stroke: 180 mm Spindle taper: MK3 Drilling capacity: 30 mm Kdjdpfx Aoyifmwohhsr Speed range: 160 to 1,420 rpm, stepless Throat: 280 mm Table diameter: 450 mm Clamping surface diameter: 360 mm Table height adjustment: – mm Column diameter: 110 mm Footprint: 450 x 650 mm Total connected load: 2 kW Accessories/Equipment: Condition: good Weight: 0.3 t Machine dimensions: 600 x 900 x 1,850 mm

Year of construction: 2026, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kdsdpsfzblqsfx Ahher

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Station type: Belt grinding Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Kdedpfxszrmqqs Ahhor Shipping packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2022, functionality: fully functional, power: 2.2 kW (2.99 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 190 mm, overall weight: 2,000 kg, Description CNC milling machine (wood router), Schreinerei Bessler Holzfräse Speed 3021, with control console including monitor and keyboard. Specifications: Kedjzvnazjpfx Ahhedr Designation: CNC milling machine Type: Speed 3021 Serial number: 2022398 Operating voltage: 400 V Motor power: 2.2 kW Year of manufacture: 2022 Total weight: 2,000 kg X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 190 mm Tool holder: ER20 Spindle speed: 1,000 to 24,000 rpm Working dimensions: 3,000 x 2,100 mm Overall (transport) dimensions: approx. 415 x 296 x 175 cm Machine weight: 2,000 kg Configuration: Gantry construction with work table Control console on mobile unit Extraction hose included Condition: Used Dismantled

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs Kedpsya H Nksfx Ahhjdr 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Timesavers Series 12-600-WW Passage width 600mm Station 1: Grinding belt, pre-grinding, removes laser spatter and raised burrs. Station 2: Grinding belt/scotch belt, final grinding, surface finishing. Kdsdpfx Asznltishhsr The Series 12-600-WW is ideally suited for deburring and finish grinding sheet metal up to 100mm thick. The two grinding belt stations provide a uniform, clean finish on the surface of your sheet metal.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Kedpfx Aoy Um S Njhhodr Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Kdedpfjwnyu Djx Ahhor Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm Kdjdonvdtcspfx Ahhor speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm max. 8,000 x 2,500 mm Kdjdpeyw Ht Eefx Ahhjr

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Kdsdpfx Aorklxvjhhjr Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Kdodpfshk Df Dsx Ahhjr Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Kdsdpszur Adsfx Ahhjr Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: used, functionality: not functional, Year of construction: 2007, Printer need to buy new printing heads Kodpfxsw Inmae Ahhodr

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Kedohzgtuspfx Ahhjdr Width: 1000mm Height: 1900mm Weight: about 100kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. Kdodpfxeztn Dzj Ahhjr - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Ksdpfx Asy E Schshhjdr Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg.

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine Kedpfxswnpflo Ahhedr ROLEI Type: 00645-KKE2 Year: 2011.

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: Ksdpfx Ajp H Tvxjhhjdr - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg