Thermo ladle
Bt0hwe2n3g
Manufacturer: Hindenlang Type: KG-600 Year 2005.
Completely new Hindenlang SLVE-900 aluminium melting furnace that can melt 900 kg at 900 degr. Celsius temperature. Melting is done using GAS.
485.0 kW power capacity
Bgri27pywe
50 Hz frequency
Oxygen and temperature measurement in molten metals
Btwhwnmicx
Portable vibrating cube for shaking out sand from big casting boxes.
Bttogniwon
Using such device you can avoid hand work and hammering the boxes with other tools.
Also parts of vibratory sieves IFE available.
faceplate diameter 900 mm
swing diameter 1030 mm
turning height 940 mm
Control Siemens
type 810
Tool changer 12
slide adjustment 600 mm
cross travel mm
total power requirement kW
P73w0f
weight of the machine ca. t
dimensions of the machine ca. m
capacity in moulds/h -
workpiece length - max. 1000 mm
diameter 1500 mm
Control Getecma
max. workpiece weight 6500 kg
turning speed range 8 - 450 U/min
Bokqajj8
Accessories/ Equipment:
- incl. clamping devices
- documentation
Max. workpiece dimensions: 1300x1000x400mm, max. workpiece weight: 120kg, nominal power: 26kVA, length: 4000mm, width: 550mm, operational hours counter: 2488h.
O8wev
Cutting hunter for 600mm cutting disc
hydraulics and electrics have been completely overhauled (incl. new winding of the electric motor)
Machine functions can be tested.
Machine documents available.
Cxyxvsrq
FOR SALE METAL BEAM MIXER OR OTHER 2 L
NEW MACHINE AT 10O HOURS
END OF ACTIVITIES
Vl7qeuk2
Vibration station 4,9x4,2 meters with 2 pallets. Vibration station is used in handmolding shops to vibrate and compact model and backing sand mixture to achieve superb surface properties of resin bonded sand molds. After filling fresh sand mixture, the vibratory table is shaking correct way for approx 10-20 seconds to achieve extremely compact and homogenious surface of mold. Own weight of vibration station 19 tons, own weight of pallets 8,8 tons, can be splitted in two halves. Weight capacity o...
Capacity 3000 kg
Production capacity 1500 kg/h
degree 1200 °c
heating capacity 1700 kcal/KW
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
G0s3mmn
Rays room - RF35
Gilardoni machine mod. CST2GGA160 serial no. 27226001 year 2008
kV 160, Voltage/voltage: 220 Vac-50 Hz, Weight: 2.200 kg
Ionisation chamber: Victoreen 451P-SI
Pvjruq
No. 1 granite top
No. 6 metal cabinets with various materials
No. 1 work bench
Notes: The Gilardoni machine needs the certificate of conformity to be marketed.
Certificate not available at present state.
Therefore the present lot is not eligible for direct purchase by end users.
Visibility: Prevalle (BS)
- OFFER 21068 -
Grinding positioning system with high frequency system 300 HZ
Technical data:
- Load capacity positioning table approx. 750 kg
- Face plate diameter 500 mm
- Height of turntable in horizontal position 680 mm
- Turntable with right + left rotation
- swivel left + right
- 2 x double foot switch for turntable + swivel arm
- hydr. clamping bolt for clamping the workpiece in the centre of the turntable
- 300 HZ high frequency system with sockets
- various pneumatic connections
- li...
REM Foundry is built on a 10.000 sqm surface and a further 7.000 sqm added in 2010.
The Foundry was designed to manufacture castings made to customer specifications. Here were casted parts ranging from 1 tone up to 50+ tones, for industries like: wind mills, heavy machine tools, mining, energetic etc. At full capacity, the foundry is able to produce over 1200 tones of castings per month.
All the machines in the Foundry come from top suppliers such as Inductotherm Europe and IMF Italy, are en...
1998 Cometal Engineering 6,045 tonne/year aluminium foundry
Scrap loader
17.2 tonne melting/holding furnace
3ijapgui
Filter & degassing system
AlTiB wire feeder system
Vertical casting machine
Casting tables for 152mm (6”), 178mm (7”) & 203mm (8”) dia. x 6.3m billets
Water treatment plant
Billet end saw
Automatic homogenizing line bi-front loader machine
6m billet homogenizing furnace
Cooling chamber
Exhaust plant
Production capacity (178mm dia. x 6m long aluminium billets)
3 castings of 20 bi...
IMR Model F.A. 2.5 S Sand Core Shooter, 2.5 litres San Capacity, 10 Sec Dry Cycle Time, 25 kg Sand Hopper Capacity, 100kg Core Box Weight
Vt2c8m
width 3000 mm
depth 3000 mm
height 1900 mm
Bkn99m3p8c
temperature 1100 °C
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. 3600x4000x3600 m
Here you can see the cheapest 3D sand printer for foundries, producing prototypes core and mold without model tools.
Build space 1,800 x 900 x 900mm with robot.
Furan resin as a binder is added layer by layer.
Reinforcing bars can be worked into the core.
The machine is built to your order!
Bogdicamn8
- OFFER 21071 -
Grinding positioning system with high frequency system 300 HZ
Technical data:
- Load capacity positioning table approx. 750 kg
- Face plate diameter 500 mm
- Height of turntable in horizontal position 680 mm
- Turntable with right + left rotation
- swivel left + right
- 2 x double foot switch for turntable + swivel arm
- hydr. clamping bolt for clamping the workpiece in the centre of the turntable
- 300 HZ high frequency system with sockets
- various pneumatic connections
- li...
- various foundry ladles for forklift pick-up
- ladle support frame can be purchased separately
B8ie0vlm
- Foundry stacker 8to. can be purchased separately
There are two identical Tapping Cabins KAMINSKI available, were used for removing casting moulds, machine two serves as a source of spare parts, stroke: 85mm, working height: 970mm.
Bspq8uswsg
Die cast machine for counter weights - steel rims
Zinc
SeSerial no: 02887
SPS-Type: Siemens S7
incl. conveyor RNA
Type SR8-B-250-2L
Voltage: 3x400V, 50Hz,
contoller voltage: 24V,
Lyzi0m8jq
pneumatic: connector 3/8,
Bpressure: 5bar,
Dimensions: LxBxH: 2900x2380x2410mm,
Weight: ca.1800kg, air volume: ca. 100l/min,
electro cabinet with siemens equipment
Tiltable roll container for foundry
Size: 800 x 1700
Capacity: 850 liters
Material: Steel
wall thickness 10 mm
Fullk7sf
heat resistant painting
mobile braked wheels
Molded box 930 mm x 850 mm x 350 mm
Bjobyl2myc
6 pieces
With: turning pin, bushing Ø 25 mm pitch: 1040 mm
With conical clamp strips, with trusses Weight: 224.4 kg
With oval holes on the ventilation sides
Induction heated precision fine castingmachine for aerospace, automotive, medical, mechanical parts and jewellery industry: Supercast for casting up to 4,0 kg.
Casting capacity Supercast (appr.):
Titan 2000 g, TiAl 1800 g, Platinum 2000 g, Palladium 3000 g, Gold 4000 g, Silver 3500 g,
Copper 3000 g, Bronze 3000g, Brass 3000 g, Stainless steel 3500 g, CrNi-Steel 3500 g, Cr/Co 3500 g.
Dimensions Supercast (w x d x h):
1800 x 1840 x 2300 mm (casting machine),
600 x 600 x1900 mm (MF-Generator)
Weigh...
Diameter of processed semi-products: 40-100 mm
Max. semi-product length: 500 mm
Number of working turns per minute: 8.8
Diameter of working rollers: 1,000 mm
Width of working rollers: 1,000 mm
Grip between the rollers: 130-250 mm
Max. rotating moment: 80 kNm
Domensions:
Minimum plan dimensions:
- right-left: 4,518 mm
- front to back: 4,317 mm
Maximum floor plan dimensions (open covers and crossbar):
- right-left: 4,518 mm
- front to back: 5,314 mm
Machine height: 4,210 mm
Crt8r3bwi
Weight witho...
Tiltable roll container for foundry
Size: 800 x 1350
Bjdj0clpz9
Capacity: 650 liters
Machine for cooling foundry sand, control voltage: 220V.
7bhmisx9
Induction melting furnace ITEP 002/150 HP
Type of furnace : Tipping with an electric drive
W2knndj7
The content of the furnace : 15 to 20 kg
Power : 150kW
Frequency : 4 kHz
Cooling : water cooling system of double-circuit
Power : 3PEN 440V, 50Hz through isolation transformer
Excellent condition was in storage since the purchase. Please check out our other listings as well.
> Please feel free to request an updated list <
- Hand moulding boxes
- 1 or 2 cams
Br9trcg9i2
- with and without gate / bar
- Loading and transport possible throughout Germany
2
Insertec Melholder 1,2-2500 furnace, 1.2tn/h of solid aluminium, hold and maintain 2500 kg of molten at target temperature, with Elevator charger, charging hood, preheating tower, melting chamber, holding chamber, ladling well, extraction hoods, weighing platform on elevation charger, (2) charging baskets, one for ingots and one for returns, Morgan melt furnace transfer pot - **CURRENTLY IN USE WITH LOT 9 - UBE UB2500iV-JL DIE CASTING MACHINE**
Technical Specifications:
Elevator charger
• Nomin...
Forklift attachment for transporting and dumping liquid aluminium
Unused inventory, built in 2009
Tipping cylinders and parts of the swing device are missing
Maximum filling weight 800 kg of melted aluminium in shamotta crucible
Empty weight with crucible 2,440 kg
Empty weight without crucibles 1,635 kg
Empty weight of crucible 805 kg
Total permissible weight 3.204 kg
Payload 800 kg
Load focus 700 mm
Hydraulic pump needed on forklifts with 100 or 200 bar pressur...
for smelting alloys lead/tin or similar metals
K 80 / 12Sn with controller 3504 - article 101660104
B9tf2rv
Technical specification:
Tmax. furnace700 c
Tmax. melting 600 c
Power: 50 kW
Power voltage: 400 v 3/N 50 Hz
Including crucible: TP 287 SF1
Capacity: about 700 kg
Energy consumption (cover open/closed): about 4/10 kW
Weight: about 1950 kg
External dimensions: about 1800 x 1700 x 1180 mm
MW50-2V - 40kW microwave system
Description:
Mulsok
- as new condition, few operating hours
- clocked continuous system with automatic lifting doors
- energy-saving vacuum operation or increased drying capacity
- 2 pcs. Electrically driven heavy duty roller tracks outside
- 1 pc. Electrically driven heavy duty roller conveyor in the chamber
- Microwave power can be retrofitted up to 100 kW
- Operation via Siemens Touch Panel 6 "
- Automatic mode
Dimensions of the system:
- Length incl. Outer r...
Fully refurbished large industrial furnace
Bmcbcmjrbg
Max temperature 1300 °C
Please check out our other listings as well.
3 units as 1 item
used melting furnace induction
Vwuhatsz
manufacturer: ABB / BBC
year: 1989
melting capacity: 3.000 kg per unit
power: 2.170 KVA
control panel for liquid cooling system
14
106 days left
Insertec FADB 1-2500 Tilting Meltower furnace, charging and preheat chamber, melting chamber incorporating and inclined hearth, holding chamber
Technical Specifications:
• Melting rate: 1000 Kg/h
• Holding capacity: 2500 Kg
• Charge material: Aluminium ingots and returns
• Tapping temperature: 750c
Combustion system
• Natural gas
• Inlet gas pressure: 100 - 150mbar
• 415 V, 3Ph, 50 Hz
Dimensions
Bqaylh2tio
• Furnace: 4500 mm
• Furnace with loader: 7100 mm
• Width: 3750 mm
• Height: 6400 mm
• ...
rotary drum dimensions:
length: 6000 mm
inside: Ø 1600 mm
outside: Ø 2280 mm
max. temperature: 1200 ° C
heating: gas
eating power 2700 kW
melting capacity: 6000 kg / h
The plant consists mainly of:
Whsrau9bh
- furnace
- hydraulic power pack and tilting mechanism
- heating system
- carousel with molds
- charge box
- measuring and control system
Rüede SC-610/D Melting crucible
Technical data:
Width overall 1318 mm
Length overall 688 mm
Height overall 535 mm
Bathroom width (medium height) 650 mm
Length bath (medium height) 400 mm
Height bath 400 mm
Operating temperature max. 450 degrees
Temperature range at controller 500 degrees
Temperature limitation 0...+700 degree
Heating capacity kw 24
Operating voltage v -3x400 50Hz
Control voltage v - 230 50 Hz
Bff90gohcv
Max. operating current approx. A 35
Weight approx. Kg 500
Year of ...
106 days left
Industriell Ugnsteknik AB continuous solution heat treatment oven, Year: 2005, with Mitsubishi PLC, LECAB conveyor and stacking system, R370149-019, S/N: 22062-6, Heller Maci 16.1 Machining Centre, S/N: 31-47047, Year: 2005, with Fanuc 160i-MB controls, Knoll AE 1110 compact coolant system, Knoll VRF250/1200 vacuum rotation filter system, Knoll 600 k-1/400 chip conveyor, S/N: 200520562, (2005), Heller Maci 16.2 Machining Centre, S/N: 31-47481, Year: 2006, with Fanuc 160i-MB controls, Knoll AE 11...
external dimensions (approx.)
width 1200 mm
height 1400 mm
99y0bvl
depth 1200 mm
temperature: 300°C - 1250°C
connection value: 41,5 kVA
10
106 days left
Industriell Ugnsteknik AB continuous solution heat treatment oven, Year: 2005, with Mitsubishi PLC, LECAB conveyor and stacking system
Technical Specifications:
Internal dimensions
• Width:2300 mm
• Height:1100 mm
• Length heat-up zone: 2600 mm
• Length soak zone: 9900 mm
• Length Total: 12500 mm
External Dimensions
• Width heat-up zone: 4350 mm
• Width soak zone:3250 mm
• Height heat-up zone: 4700 mm
• Height soak zone: 2450 mm
• Length: 13000 mm
• Range of temperature: 150-550°C
• Temperat...
This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
