Used Dilo Needle Loom for sale (317)

Condition: used, Year of construction: 1999, Two Juki button sewing machines and one Herbert Meyer fusing machine are available. 1) 2x Juki MB-373 button sewing machines, stitch type: single-thread chainstitch, max. sewing speed: 1500stitches/min, number of stitches: 8/16/32, crosswise feed: 2.5mm-6.5mm, lengthwise feed: 0mm/2.5mm-6.5mm, button size range: 10mm-28mm, needle bar stroke: 48.6mm. 2) Herbert Meyer RPS-L 600 fusing machine, year of manufacture: 1999, fusing width: 600mm, max. belt speed range: 9m/min, max. pressing pressure: 3.5bar. Oil level and needles should be checked. On-site inspection is possible. Iijdozuzzcspfx Agysh

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site. Iijdpfxovvlyio Agysh

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Iiedpfxsyz An Te Agysh

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Isdpfx Agsvpalajysih ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Mono Filling Machine - Brand new - For filling doughnuts, croissants, etc. - Electronic control - 2 tanks - 4 needles - Warranty Iiedpfxjz R S Hnj Agysh - Collection from warehouse / shipping option available - Price on request

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, clearing needle, push clearing needle -Quantity: 2 pieces still available -Keyway width: 10 mm Isdpfxjzlgb Nj Agysih -Type: see photos -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 4.5 kg

Condition: good (used), Year of construction: 2004, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine by Krauss-Maffei, type 80-220C2 The machine comes from a clean operation that places great importance on maintenance and is fully operational immediately after installation Year of manufacture: 2004 Machine number: 61004709 Clamping force 80 tons Equipment: -Cylinder D35 -1 hydraulic core pull -Pneumatic needle shut-off -Tie bar withdrawal device on the operator’s opposite side Ijdpfxewqmvgo Agysih Transport and loading can be organized throughout Europe for an additional charge if desired. Prices plus VAT Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machines buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further info or means of contact, visit our website

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings Iiedpfx Agsgaby Dsysh -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 320 mm Iiedsgabyyjpfx Agyoh -Outer: Ø 359 mm -Width: 175 mm -Weight: 19 kg

Condition: new, Year of construction: 2025, Dürkopp Adler 867-290142-M NEW – Double Needle Direct Drive – Direct from Stock – €6,500 excl. VAT For sale: brand new Dürkopp Adler 867-290142-M, available immediately from stock. ✔ New / unused ✔ Double-needle version – ideal for parallel stitching and finishing on leather, textiles, and technical fabrics ✔ Available in 6 mm, 8 mm, and 10 mm stitch width ✔ Equipped with M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Professional German quality from Dürkopp Adler ✔ Ready for immediate use in workshops or production Limited-time offer – only valid until the end of April 2026! Special price for quick sale: €6,500 excl. VAT First come, first served – available immediately Iiodpfxez Abyue Agyoh For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine used industrial sewing machine sewing machines for businesses

Condition: good (used), functionality: fully functional, Brother S-7300A-403P Full Sewing machine station. Single Needle Direct Drive Lock Stitcher with Electronic Feeding System and Thread Trimmer. With Work Table and Spindles. World’s first Electronic Feed Control DigiFlex Feed digitalizes the feeding system and resolves various sewing troubles without adjustment work. Improvement in the reduction of needle breakage and productivity. Simple select and smooth sewing without material slippage. Excellent sewing quality that's easy to get proper thread tension in accordance with several materials. The Electronic Feed Control is directly connected to the stepping motor The horizontal feeding system is one of the first systems computerized for a single lock stitch sewing machine. The feed motion can be changed with one touch of a button to provide the best sewing quality for various materials. The sewing stitch length can also be digitalized, stabling the stitches. Compared to conventional mechanical control, the stepping motor control makes the response of reverse sewing quicker and reduces needle breakage. Ijdpjv U Ehqsfx Agyjih LED Light Equipped as Standard Both sides of the LED handy light are equipped for better operation, preventing shadows on the garment. The brightness can be adjusted on the panel. Good working condition. Please check out our other listings as well.

Condition: good (used), Renz DTP 340M Perforator The machine is in very good condition, ready for production. Includes a Renz PBS 340 for mounting fixtures in plastic, and a waste container. Electric perforation device for closed spirals, screw-in spirals, or plastic spines from the German company RENZ: • Device for perforating paper, cardboard, or PVC with a working width of 340 mm, operated by a foot pedal • Perforates up to 35 sheets in a single cycle (depending on the module) • Quick and easy strip replacement • Can be equipped with strips with square, round, and oval holes in various sizes • Can be used with strips with a recess for hanging • All perforation strips for closed spirals are equipped with an individual needle shut-off option as standard, without having to remove the strip from the device • Can be connected to the WBS 360 manual clamping module Technical parameters: Isdpfx Ajzyz E Esgyeih Maximum perforated material length: 340 mm Maximum perforated material thickness: 3.5 mm (up to 35 sheets) Dimensions: 36 x 49 x 25 cm Power supply: 230 V / 50 Hz Net weight: 40 kg Pitch: 2:1, 3:1 (depending on the type of strip installed) The set includes a tool 5.5 x 3.5 mm 2:1.

Condition: ready for operation (used), Year of construction: 2010, Various sewing machines are available: 1) 1-needle flatbed sewing machine Adler, year of manufacture: 2010. 2) Fitted sheet overlock machine Pfaff with elastic and 2-needle flatbed, year of manufacture: 2010. 3) 1-needle flatbed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 4) 2-needle flatbed sewing machine Pfaff 1446 for gathering, year of manufacture: 2010. 5) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 6) 2-needle flatbed sewing machine Sewmaq SW898h-7 with conversion option for double stitch or normal stitch, year of manufacture: 2010. 7) Welting machine Adler 204-4102 S, year of manufacture: 2010. 8) 2-needle flatbed sewing machine Pfaff 1422 for zippers, year of manufacture: 2010. 9) 2-needle post-bed sewing machine Global LP 9226 LH-5NB with double stitch, year of manufacture: 2010. 10) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 11) 5-needle overlock machine Textima 8510 for fitted sheets, year of manufacture: 2010. 12) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 13) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 14) 1-needle flatbed sewing machine Pfaff 1425, year of manufacture: 2010. 15) 1-needle flatbed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 16) 1-needle post-bed sewing machine Global WF 1515 AUT, year of manufacture: 2010. 17) 2-needle post-bed sewing machine Fomax KDD 8420 H-3 with double stitch, year of manufacture: 2010. 18) 1-needle zigzag sewing machine Minerva 335-111, year of manufacture: 2010. Iiedpfx Agjtzdfqjyoh

Condition: excellent (used), functionality: fully functional, mileage: 600 km, power: 120 kW (163.15 HP), first registration: 12/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,640 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 3, loading space length: 3,570 mm, loading space width: 2,090 mm, loading space height: 2,250 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, seat heater, soot filter, start-stop system, tire pressure monitoring, traction control, truck registration, Body equipment: Iiodpoyya T Refx Agyjh Lightweight furniture body by Junge, internal dimensions LxWxH: 3,570mm x 2,090mm x 2,250mm; 3D roof spoiler painted in vehicle color, interior lining made of needle felt, side door 950mm x 2,000mm, aluminum base plinth 180mm, pull-out furniture step under the body, 2 rows of slat lashing rails, LED interior lighting, reversing camera, rear rubber bumpers, extendable step, front wall impact protection. Special equipment: Electrically adjustable and heated exterior mirrors, manual diesel particulate filter regeneration, chassis: reinforced damping and stabilizers front and rear, cruise control including speed limiter, fuel filter with water separator and sensor, roof marker lights, smoker's package, spare wheel with road tires including on-board tools and jack, reversing camera preparation, LED headlights, seat upholstery: artificial leather, cabin seats: front passenger double seat with storage/compartment, cabin seats: Comfort Plus driver's seat, rear underrun protection, preparation for third brake light, seatbelt warning system for driver and passenger. Additional features: Storage package 2, driver/passenger airbags, passenger airbag switch-off, Composition Colour audio system (radio / SD card interface / USB), automatic headlight activation, convex exterior mirrors left and right, LED side indicators integrated into exterior mirrors, rubber flooring in the cab, dual headlights, twin-tone horn, driving assistance system: hill start assist, brake assist system (HBA), driver fatigue detection sensor, lane keeping assist, area surveillance system (Front Assist) with city emergency braking function, front electric windows, laminated windscreen, two foldable remote keys, speed limiter system 130 km/h, automatic 8-speed transmission, A-pillar grab handles, lockable glove compartment, cab interior LED lighting, chassis/body: platform, fuel tank: 75 liters, upper grille strip in chrome, multifunction steering wheel, adjustable steering column, headlight range adjustment, light assistant (Coming Home, Leaving Home), truck registration, side marker lights, Bluetooth mobile phone interface, engine 2.0 L - 120 kW TDI, multifunction display Plus, multimedia interface 2 x USB (Type C) front, rear fog light, emergency call system, digital radio (DAB+), wheelbase 3,640 mm, tire repair kit, tire pressure monitoring system, Euro VI emission standard, SCR system (AdBlue technology), electro-mechanical power steering, engine start/stop system, front bumper in gray, heat-insulating glazing, central locking with remote control and interior operation, permitted gross vehicle weight 3.50 t.

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Iiodpfjz Ac Rnox Agyeh

Condition: ready for operation (used), Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible. Ijdsw U Ubkepfx Agyeih

Condition: new, PFAFF 335-G-6 Free-arm sewing machine for industrial and craft applications SINGLE-NEEDLE, DOUBLE-CHAINSTITCH FREE-ARM MACHINE FOR LIGHT TO MEDIUM-WEIGHT MATERIALS The PFAFF 335-G-6 /01 is a versatile free-arm machine suitable for use with small leather goods, leather clothing, upholstery, shoes, etc. It is ideal for working on tubular or pre-assembled items, as well as for standard sewing operations on leather goods, bags, and wallet-type items. • Needle system: 134-35 LR Ijdjz I Ta Ijpfx Agyjih • Maximum stitch length: 6 mm • 220 Volt electronic motor • Needle positioning • Sewing light, 5 bobbins, 10 needles • Mounted on a table: 55 x 105 cm – U-shaped table or standard table top • Warranty: 2 years

Condition: like new (used), Juki PLC 2710-7 Industrial column sewing machine. 3-way (needle, foot, feed) transmission Head-mounted, direct-drive, energy-saving servo motor 230V 50 HZ Consumes 37% less electricity. compared to conventional motors. For medium and thick materials Isdpfxjwarcke Agyeih Double capacity, large rotary, automatic thread cutting, foot lifting, reinforcement. Semi-dry oiling, only the rotary is oiled, so the machine uses much less oil. CP-180C program panel

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Iiedpevdu N Ajfx Agysh

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor Isdpfxox Ituqe Agyjih

Condition: new, Year of construction: 2026, input voltage: 220 V, Dürkopp Adler 867-290142-M Industrial Sewing Machine – XXL Hook – Single- and Double-Needle 10 MM NEEDLE DISTANCE For sale: Dürkopp Adler 867-290142-M industrial sewing machine with an asymmetric needle system and XXL hook. Thanks to the asymmetric needle system, this machine can be used as both a double-needle and single-needle sewing machine. The XXL hook provides a larger bobbin capacity, allowing you to work longer without changing the bobbin thread. The machine is suitable for sewing leather, artificial leather, canvas, upholstery fabrics and other heavy materials. Features: Iedpfx Agoz Abx Rjysih Brand: Dürkopp Adler Model: 867-290142-M Asymmetric needle system Can be used as both a double-needle and single-needle machine Equipped with an XXL hook Larger bobbin capacity 10 MM NEEDLE DISTANCE Suitable for leather, artificial leather, canvas, upholstery fabrics and heavy materials Professional quality Suitable for intensive use Condition: BRAND NEW Price: €6,500 (excluding VAT) The cheapest in all of Europe – nowhere else available at a lower price! For more information or questions, please feel free to send us a message. Dürkopp Adler 867-290142-M Dürkopp Adler 867 Dürkopp Adler 867 double needle Dürkopp Adler 867 single needle Dürkopp Adler asymmetric needle system Dürkopp Adler XXL hook Industrial sewing machine Heavy duty industrial sewing machine Heavy material sewing machine Leather sewing machine Leather industrial sewing machine Upholstery sewing machine Canvas sewing machine Artificial leather sewing machine Double needle sewing machine Single needle sewing machine Double needle industrial sewing machine Single needle industrial sewing machine Walking foot sewing machine Compound feed sewing machine Triple feed sewing machine Heavy duty walking foot machine Industrial machine for leather Industrial machine for upholstery Sewing machine for heavy fabrics Professional sewing machine Commercial sewing machine Dürkopp Adler leather machine Dürkopp Adler heavy duty sewing machine Dürkopp Adler walking foot machine Dürkopp Adler double needle machine Dürkopp Adler single needle machine Dürkopp Adler 867 Industriële naaimachine Industriële leermachine Naaimachine voor leer Naaimachine voor zware materialen Dubbelnaalds naaimachine Enkelnaalds naaimachine Industriële dubbelnaalds machine Industriële enkelnaalds machine Naaimachine voor meubelstoffen Naaimachine voor kunstleer Naaimachine voor canvas Drievoudig transport naaimachine Walking foot naaimachine Zware industriële naaimachine Dürkopp Adler leermachine Dürkopp Adler dubbelnaalds Dürkopp Adler XXL grijper Dürkopp Adler 867 Industrienähmaschine Ledernähmaschine Doppelnadelnähmaschine Einnadel-Nähmaschine Nähmaschine für schwere Materialien Nähmaschine für Leder Nähmaschine für Kunstleder Nähmaschine für Polsterstoffe Nähmaschine für Canvas Industrienähmaschine mit Dreifachtransport Doppelnadel Industrienähmaschine Einnadel Industrienähmaschine Dürkopp Adler Ledernähmaschine Dürkopp Adler Doppelnadelnähmaschine Dürkopp Adler XXL-Greifer

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Iiodpfx Agsxzh Amsyoh

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Iedpot Dwb Djfx Agyjih Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042026PA, type of input current: three-phase, total width: 2,504 mm, total length: 5,768 mm, input voltage: 400 V, feed length Y-axis: 2,500 mm, working width: 1,800 mm, total height: 1,330 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, BUFFALO Cutter – Fabric & Textile Cutting Machine Our BUFFALO Cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Highest cutting precision for patterns, prototypes, and series production • Flexibility for different materials and formats Ijdpozf Ifvefx Agyeih • Efficiency through short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model PC W16L25 • Single-layer cutting up to 50 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double cutting head, needle punch, and plotter pen holder • Tool kit: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • Vacuum pump • Air compressor • Passive roller feeder for non-elastic fabrics • Parmel Cutting Software • 12 months warranty We offer installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: ready for operation (used), Year of construction: 1997, A Raschel warp knitting machine Karl Mayer is available. Working width: 130inch, gauge: E32, yarn feed: EBA-1, guide bar element: C-32-28/P2, guide needle element: Spec-38-45 G105, latch needle element: L-32-93H-0, knock-over comb element: S-32-93H-0, speed: 1800-2000, yarn monitoring: Laser 4080. Including computer. Documentation available. An on-site inspection is possible. Isdpfx Asyz Apdjgyeih