pressure 32 t
stroke 250 mm
table-size 500 x 760 mm
work height max. 925 mm
bending speed max. 25 mm/sec
tank capacity 80 l
Pressure power 320 bar
total power requirement 5,5 kW
weight of the machine ca. 0,8 t
dimensions of the machine ca. 1,3 x 0,5 x 1,3 m
Digital readout positioning ram
Foot switch ram adjustment
Hydrosystem 40 L
Table Length: 1.250mm
Table Width: 660mm
Max. pressing force: 30.000Kg
max. work piece height:250mm
max. die height: 300mm
Stroke adjustable: 235mm
Working speed: 10 / 20 mm/min.
Capacity flatt: 200 x 18 mm x mm
Length: 1.250 mm
Width: 660 mm
Height: 1.200 mm
Weight: 1.050 kg
Please Note: The information on this page has been obtained to the best of ...
Salvagnini P2Lean panel bender system, Austria (serial number: P4M_142_1968), year of construction: 2015.
Machine operating time: 200 hours.
The P2lean is the ultimate Salvagnini panel bender, natively combining productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools. Equipped with an automatic ABA blankholder, the P2lean doesn't require re-tooling and completes an average of 17 bends per minute.
It uses unive...
KARMET SERVALO 1530-40TN ELECTRICAL PRESS BRAKE.
With 2 Lenze Servo Motors.
ESA Touch Screen 19’’ 2D Controller.
Mitsubishi Drivers and Motors for Back Gauge.
X - R type back gauge.
European type V die.
European type Punch.
Electrical cabinet cooling system.
Front Support Arms - linear guided 2 nos.
Front and Back protection according to the CE (Akas, Sick)
Quick release top tool holders.
Standard sectioned full length tooling.
(Punches: 85° R=0,8 H=120+30 & 4V DIES V16-22-35-50(85°)...
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m/sec
work speed max. 9,8 m/sec
return speed 20 mm/sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
Bending capacity of massively around 32 mm
Bending capacity of massively square 28 mm
Bending capacity Strip max 50 x 20 / 140 x 12 mm
Bending angle (clockwise) 10800 °
Bending angle (counter-clockwise) 10800 °
Setting accuracy 1/10 °
Bending moment Max 2000 NM
Bending speed up 48.5 ° / sec
Connection voltage 400 V
Frequency 50 Hz
Power supply 2.5 kVA
Power 10 A
Temperature range 10 – 40 ° C
Relative humidity 8-80%
Machine weight, kg: 565
Number Max programs (to expand to 500) 20
- Pressure capacity 320 KN / 32 t
- pressure regulation stepless 0 - 32 t
- stroke length 0 - 200 mm
- max. installation depth 300 mm
- lifting speed 0 - 0,6 m/min
- tool height approx. 240 mm
- Bending capacity approx.
- with prism MW 125 flat approx. 200 x 16 mm
- with prism MW 240 flat approx. 200 x 24 mm
- tube bending up to approx. 2 inch
- Drive 400 V / 5,5 kW
- space requirement approx. W 1200 x H 1400 x D 1250 mm
- Weight approx. 1400 kg
Make: Profilbiegetechnik AG/Indumasch
Type: PBT 25
Control: BC 100
Printing capacity: 27 to
shaft diameter: 105 mm
max. profile height: 300 mm
max. torque: 300 -
Speed: 12-24 min.
tool holder: Ø 105
stroke: 265 mm
Drive power: 6.5 kW all 3 shafts driven
Dimensions: approx. 1680 x 1250x1390 mm
Weight: approx. 1.1 to
- different roller sets possible
- infinitely adjustable front roller distance 200 - 1000 mm
- 3 Roller drive
All information without guarantee.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.