Used Elkon Induction Furnace for sale (1,237)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Gedpfewtfiqsx Af Ajbl Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included Gbodovkhl Dspfx Af Ael 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included Gbodpfx Afsxtf Dfe Asl 160 kW compressor for 3 mm glass included In good condition.

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading. Gjdpsxguqnsfx Af Asbl

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Gjdpjyfv N Rofx Af Asbl

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Godpfx Afexp Rbho Ajbl

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Godpfx Afjwkiips Ajbl

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Gbedpfx Aevxvgrof Asl

Year of construction: 2006, condition: ready for operation (used), An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible. Godpfx Ajw Exrvjf Ajbl

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Gsdpfxew Igvte Af Ajbl

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Godsw Emyzopfx Af Ajbl

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Gjdpfx Afsygw S Ae Aebl

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Gbedpfx Aext Rmlef Aol

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Gbjdpfx Afotxb Avj Ael

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Gbjdpfx Astxb Apef Asl

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Gbodpfx Afstndwue Aol

Condition: new, Year of construction: 2010, Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich. Gbsdjxxl Ihopfx Af Asl

Year of construction: 2008, condition: ready for operation (used), A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible. Gbedewmdvvopfx Af Aol

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Gedpfx Ajfz U Tqjf Aobl In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Gjdpfjfy Txysx Af Aebl Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Gbodpfx Aefzkqmjf Ael You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: Gbodpfx Afsg Ib Epj Ajl • Top transport, • Touch control panel, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Gbsdepkwhqepfx Af Ael Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: new, Year of construction: 2025, Firing chamber output: 49 kW Working power: 45 kW New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W Gedpfek Utrdex Af Aobl designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Oven length without flue gas fan: 1150 Weight: 305 kg

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Gedpfsd Srlrjx Af Aobl Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!