Used Erema Strand Pelletising Systems for sale (37,743)

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Condition: used Scope of delivery: (See picture) Hfodszdr Edspfx Af Eoh (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Here we offer a Bosch Sigpack Systems unit with a Manz Aico pendant hand programming device. Hodpszdrzrefx Af Eofh Bosch Sigpack Systems with Manz Aico pendant hand programming device Bosch Sigpack Systems XR31-3 with Manz Aico pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz hand programming device Type: 80017134 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Hodpfx Afsy Rlbhs Ejfh Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and a CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V895-440 HBT SP Air-Cooled Vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial design Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Controller IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Sliding table / mounting table available Vibration-isolated installation Program operation possible Sliding table 760 mm x 850 mm Threaded insert spacing 100 mm Enabled licenses: Excitation types Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Random, Sine-on-Random PSD Limit Control, Shock Extensions Hjdpfx Afjy Iwp Sj Esfh Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / controller active Inspection under power possible Scope of delivery LDS V895-440 HBT SP Shaker LDS SPA56K Amplifier IMV K2+ System PC system complete CTS climate chamber Accessories as shown in the pictures Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Here, we offer you a 3DMICROMAC laser marking system. microCUT Enclosure Laser source IPG Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60 Hz Power consumption 51.3 kW Control voltage 24/5 VDC Main fuse NH 100A gG Module: Laser source: Mains voltage 400 VAC Frequency 50/60 Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Hfodpfszdqp Iex Af Esh Machine: Consumable media Operating pressure 6-10 bar Temperature 10-50 °C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Set point tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Set point tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG, Type: YLS-5000, Mode: Continuous wave, Quasi-continuous wave Wavelength 1070nm Power 5kW, Frequency 5 kHz Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60 Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V, Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v, Type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration, Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Operating pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: Laser marking system microCUT Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. Hedpfxszdqkre Af Eefh The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper Hfodpfx Ajzdp Icjf Ejh 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone. Hjdpfxozdn T Ro Af Ejfh

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone. Hfjdpfxszdn S To Af Eoh Written orders can be placed by email or fax.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Hfjdpfjzdn H Rsx Af Ejh Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Hodezdnxgopfx Af Esfh Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. Hjdpfx Afeq Nw Uqs Esfh 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Hjdpeq Nfuzefx Af Eefh 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2003, condition: good (used), Conveyor system (outlet) behind e.g. Weinig planing machine Max. wood length 3200 mm, with cross transport Hsdjzdplnopfx Af Ejfh With return belt 6000 mm

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Description Professional hydrogen leak detection system consisting of the INFICON Sensistor ISH2000, INFICON TGF10 tracer gas filler, and AP57 search probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical data Power supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Printer port Probe control port TGF10 Tracer Gas Filler Hfedpjzdggwsfx Af Esh Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Weight: approx. 4.7 kg Equipment Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application areas Leak testing of pipelines Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing systems Condition Used Optical condition as shown in the pictures Display active Normal storage and usage marks present Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: excellent (used), 1 used, very well-maintained universal milling head, System "HURON", with hydraulic tool clamping and a blow-out function for cleaning the taper socket. Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 SK - ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Hjdpfszdbxbex Af Ejfh Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel table system "HURON" • Hydraulic tool clamping • Blow-out function for cleaning the spindle socket • For retrofitting to conventional, NC or CNC milling machines and panel saws or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) This high-quality milling head was used as a loaner milling head and was only used for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Load capacity: 150 kg Hfjdszb Iyaepfx Af Esh Fresh water connection: 1/2″ Drain valve: 1 1/4″ Weight: 330 kg

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials Hfjdpfeq Igyvox Af Eeh - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: not inspected (used), Year of construction: 1999, Dimensions (L/W/H) 3500 x 3500 x 6000 mm Filter capacity 216 m² Number of filters 121 (11x11) St. From the closure of the window construction company ----- Nestro filter system with various fans Automatic shaking-extinguishing line including Heizomat feed for wood chips with transport to the silo ----- Info: Outside: Intermediate filter, Heizomat, fans and pipes must be dismantled by yourself. Switch cabinets (fans, control, Heizomat feed) already disconnected by electrician and ready for shipping. Hfedpjy Hl Itjfx Af Ejh Dimensions approx.: ----- Filter system: upper part: length 3.4 m x depth 3.4 m x height 3.0 m lower part: length 3.0 m x depth 3.0 m x height 1.9 m adjustable feet: height approx. 0.9 m filter hose length probably 2,500 mm filter area probably 216 m2 heating system feed length 3.8 m x depth 1.4 m (technical information according to manufacturer - no guarantee!

Condition: ready for operation (used), working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Hedpfexpn Tnsx Af Eefh Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. Hjdpjylyhdofx Af Ejfh 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: used, engine 0,37 width 650 mm height 1.800 mm length 650 mm Compact and lightweight portable vacuum for removing wood chips and sawdust. Hfsdpfx Afszcq A Ho Ejh

Condition: used, engine 1,5 kW Hsdpezcq Ayefx Af Eofh 2.150 m³/min width 500 mm length 1.100 mm height 2.150 mm Powerful mobile vacuum cleaner, Schuko model 61 36 00. Professional-grade unit for collecting wood chips and sawdust.

Condition: ready for operation (used), functionality: fully functional, Extraction unit 5.5 kW Hodpfx Aeyr Nhmjf Eofh Power: 5.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Option for air recirculation back into the workshop

Condition: excellent (used), Extraction installation Termoaspira 70M Power 7.5 kW Hfodpsyh T Sxefx Af Eoh Pneumatic filter bag cleaning system Air return to the hall Auger for chip removal Rotary airlock valve