Used Euromac Slitter Rewinder for sale (345)

Condition: used, Year of construction: 2015, functionality: fully functional, Heidelberg SBD | 64x90cm ・Fully Refurbished 2015 ・Very Good Used CMI Cylinder ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Touchpad Operation System Isdpfx Acsyzgl Aeajtk ・Excellent Used Machine *Very clean, well maintained and serviced* LOCATED IN THE UK | AVAILABLE IMMEDIATELY

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Iodpfx Acjxz Ewneajtk

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Itjdeyiurrspfx Acask

Condition: used, Year of construction: 2007, The machine has undergone extensive modernization, including: • Regi-Star 20 register control upgrade • IPQ Check Pro 100% print inspection system HELIOSTAR S DRIVE RETROFIT The original gravure cylinder drive system has been upgraded to the latest Heliostar S configuration, including: • New gravure cylinder drive motors • Upgraded inking roller drive system • New cylinder chucks with adapters • Chuck drive supports • Chuck sensor system • New gravure cylinder bearings • Upgraded sidelay register components • New sidelay register drive units • New sidelay register safety guards • Mechanical retrofit and mounting components • Electrical accessories and complete technical documentation FEATURES • Excellent mechanical condition • Outstanding cosmetic condition • Fully operational and production ready Itjdozrugtepfx Acajk • Extensive modernization program • High-performance automatic turret unwind and rewind • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • BST 100% web inspection • Suitable for high-quality flexible packaging production TECHNICAL SPECIFICATIONS Specification Details Printing Process Rotogravure Number of Colours 8 Web Width 1,020 mm Maximum Print Width 1,000 mm Print Repeat Range 450 – 1,050 mm Unwind Diameter 1,000 mm Unwind System Turret flying splice with reel lift Drying System Gas heated Corona Treater Yes Ink Viscosity Control Yes Edge Guide System Yes Inspection System BST Rewind Diameter 1,000 mm Rewind System Turret flying splice with reel lift (76 mm & 152 mm cores) Machine Features • 8-colour high-performance rotogravure printing press • Automatic turret unwind and rewind with flying splice • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • Web edge guiding system • BST web inspection system • Suitable for high-quality flexible packaging and converting applications • Robust W&H engineering for reliable, high-speed production Applications Ideal for printing: • Flexible packaging • Food packaging • Industrial packaging • Laminating films • Printed plastic films • High-quality packaging materials

Condition: good (used), Year of construction: 2019, functionality: fully functional, Manufacturer: Grafisk Maskinfabrik A/S, Denmark Model: GM DC330 V8-BX Designation: Converting Line Year of manufacture: 2019 Material width: 333 mm Max. speed: approx. 50 m/min Voltage: 3 x 400 V + N + PE Max. load: 32 A Frequency: 50/60 Hz CE conformity: Yes Location: Germany Availability: End of September 2026 Main configuration: • Unwinding unit, 3" core / 76 mm • Web guiding system • Flexo printing / varnishing unit • Lamination unit Itedpfezkarrex Acajk • Cold foil application • GEW UV curing unit • Pre-heating unit for toner / reduction of toner cracking • Semi-rotary die-cutting unit with Kocher & Beck GAP function • Approx. 25" magnetic cylinder system, usable format approx. 22" • Matrix rewinding • Back scoring • Slitting unit with shear knives • Two rewinding shafts, 3" • Touchscreen control • Suitable for offline roll-to-roll production Additional equipment: GM Buffer • Condition: Visual condition: 8/10 Technical condition: 8/10 The machine is currently still in operation and can be inspected while running. Based on the available photos and information, the machine appears to be in good, clean, and well-maintained condition. A final technical inspection and test run are recommended before purchase.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Manufacturer: Marga Fischer & Krecke Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Itodpfxszafipo Acask Maximum material width: 1200 mm Maximum printing width: 1150 mm Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: ready for operation (used), Year of construction: 2017, A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible. Iedpfx Acjzmymhoastk

Condition: reconditioned (used), Year of construction: 2021, Jumbo roll diameter max. 900 mm Material width max. 380 mm Printing width max. 370 mm Rewind diameter max. 900 mm Machine speed 250 m/min Year of manufacture 2021 Low operating hours Consists of: Isdjzn H Riepfx Acaetk - All machine components are servo-driven - 2 servo-driven Bobst flexo printing units min/max printing repeat 305-610 mm, UV drying, - Machine design complies with CE standards - 1 die-cutting unit, servo-driven - 1 matrix rewinder, diameter max. 600 mm - 1 turning bar - 1 inline slitting unit - 1 set of documentation Accessories: - 4 Anilox cylinders - 10 printing cylinders - 5 die-cutting cylinders

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Itjdowufzcopfx Acaek

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Itsdpfew Dd Igex Acask Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Itjdsziatgjpfx Acajk Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Itjdpfxezkru Ej Acaok Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Itsdpoxw Uqvofx Acaok Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Itodpfszpbazox Acaok Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Itodpfjy Shztjx Acaek Max. speed: 200 m/min Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Isdszka T Aopfx Acastk Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 linear meters from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing, and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution, and a digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine, and rewind system, making the machine suitable for efficient short-run and medium-run label production. Itedpfx Asy Ul I Aecaek

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) Iodpszp R Dpofx Acastk * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films

Year of construction: 2004, condition: ready for operation (used), Max. web width: 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Iedpfx Acey Shz Hsastk Core diameter: Unwind: 76 mm / Rewind: 76 mm Max. speed: 230 m/min Description: Unwind unit, splicing table with clamping device, web guiding and web tension control (including automatic web fixing during stop operation), single punching station (no tools included) with rewind for the punching grid, up to 12 slitting knives in a cutting unit with separators for slitting and/or longitudinal cutting of the rolls, extended operator panel for settings, counter (labels or meters) as well as inspection control (missing label detection) with visual check, 2 driven rewind shafts for fast and efficient production. All safety devices are installed on the machine.

Condition: new, Year of construction: 2026, Delivery every Monday, Tuesday - RELIABLE! Itodecudlaspfx Acaok The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Heavy duty manual guillotine shears for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE approved quality Declaration of conformity stable and robust construction for steel plates up to 1.2mm open design suitable for endless cuts large cast work table Working length 2050mm Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Price: 4.650 euros Delivery date: every week We are looking forward to your contact!

Condition: like new (used), Year of construction: 2014, Nilpeter Model: FA-4 – like new! Year: 2014 Printing Width: 410 mm (16") Web Width: 420 mm Colors: 6 UV Flexo Machine Speed: up to 175 m/min Delivery Terms: FCA – Loaded into Container Condition Rating (FGT): ★★★★★☆ (9/10) _____ Why this machine is interesting This Nilpeter FA-4 represents one of the most advanced generations of servo-driven label presses. In addition to its excellent basic configuration, the machine offers an impressive array of valuable accessories and upgrades, making it immediately suitable for a wide variety of production jobs. Key advantages include: • Premium servo-driven Nilpeter FA platform • 6 UV Flexo printing units • Double rotary die-cutting capability • Corona treatment installed • WINK Gap Control system installed • UV lamination capability • Cold foil preparation • Delam/Relam system • Turret unwinder/rewinder • Video inspection system • Automatic web guide • Automatic register control • Cleaninking quick-change ink chamber system • Comprehensive tooling package included Iedszmhikepfx Acajtk • Large package of anilox rollers • Extensive sleeve package • Extensive magnetic cylinder package This configuration allows for immediate production without significant investment in additional tooling. _____ Technical Specifications • Maximum web width: 420 mm • Maximum print width: 410 mm • Printing technology: UV Flexography • Printing units: 6 • Mechanical speed: 175 m/min • Servo-driven technology • Automatic register preset • Automatic impression preset • Quick-change Cleaninking cassette system • Servo-driven anilox rollers • Servo-driven plate sleeve system • Double-arm automatic unwinder • Double-arm automatic rewinder • Pneumatic splice table • Automatic web guide • Web break detection • Passive antistatic • Cooling system • UV drying • Integrated video web inspection • Rail system for future converting modules • Rotary die cutting • 360° register adjustment

Condition: used, Year of construction: 2012, Year: 2012/2013 Condition: dobrý Available: Q1 2026 (february) Configuration: Itedjx Em Avspfx Acajk - MBO RBF 520 buffer unit - MBO SVC 521C slitting + cutting unit - MBO DFT 560/6 folding unit - 6 buckles - automatic setup - folding rollers - automatic setup - slitter shaft casette - MBO ASP 66 - shingle delivery + pressing unit - MBO X - FW 50 - mobile knife unit

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Ijdpfx Acjyt N Dqsastk

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Ijdpey Uydfjfx Acajtk

Condition: used, mileage: 68,000 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,450 mm, loading space volume: 14 m³, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Reference Number: #210 MAN TGS 28.510 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with powerful Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and jetting operations, combining high suction power, effective water recycling, and robust high-pressure technology in a durable, user-oriented configuration. With a 14,000 L tank capacity, 3,000 m³/h vacuum power, large-diameter DN150 suction line, and a high-performance Uraca high-pressure system, this recycler is ideally equipped for demanding municipal and industrial applications. Extensive operating, comfort, and safety features enable efficient workflows even during long periods of use. Body: * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000-liter tank capacity * 1,000-liter fresh water * 5,000-liter jetting water * 8,000-liter sludge compartment * Discharge by tilting tank up to 45° Vacuum System: * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h * Galvanised DN150 pipework * Approx. 20 m suction hose DN150 High Pressure System: * Uraca P3-45 65 413 liters/min at 175 bar * Approx. 160 m HP hose DN32 * Hydraulic jetting hose reel with approx. 80 m DN13 Additional Fresh Water Unit: * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring rewind hose reel with 15m pressure hose DN10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Suction and HP booms * 5-liter heated hand wash * Stainless steel toolbox * Operator control cabinet with display * Engine start controllable from cabinet * NMV start controllable from cabinet * Radio remote control with display * Equipment cabinet with two doors – both sides accessible * Hose storage rack * Extended soundproofing for pump compartment * LED work lights * Central lubrication system Technical Data: Iedpfxsydhh Ne Acajtk * Unladen weight: 18,385 kg * GVW: 26,000 kg * Length: 10,100 mm * Height: 3,450 mm * Width: 2,550 mm Chassis: * MAN * TGS 28.510 * 6x2 * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning * Self-propelled working machine — sewer cleaner Conclusion: An extremely powerful MAN TGS 28.510 6x2 equipped with Wiedemann Super 2000 water recycling body, advanced vacuum and high-pressure technology, and thoughtfully designed operator and comfort features. The ideal solution for professional sewer cleaning companies who place value on efficiency, performance reserves, and rugged technology. For further details and/or pictures, please contact us directly. A wide range of additional vehicles for SALE or RENT can also be found at: Changes, prior sale and errors excepted. The purchaser is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and excludes any warranty.