Used Expert Pallet Table for sale (23,877)

Condition: used, Year of construction: 2023, dimensions 0,70 x 0,50 x 0,10 m weight 200 kg In our assessment, the zero-point clamping system is in good used condition. There are 2 units available. Price per unit Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Bedpfx Amozhpayensli Prior sale is reserved.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Bsdpfjzii A Dox Amneli Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 1999, operating hours: 356 h, BT Bjdpfx Amoziivdonoli Model PPS 1200 MX / 1 The BT PPS 1200 MX / 1 is an electric high-lift pallet truck manufactured by BT, designed for internal material transport. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities. Key technical features: Load capacity: 1,200 kg Lifting height: approx. 2,700 mm Fork length: approx. 1,150 mm Drive: 24V electric drive Battery: 24V Model year: 1999 Operating hours: approx. 356 hours The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase. Battery replaced in October 2022. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW Bederwx U Iopfx Amnjli ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: used, Year of construction: 2017, Overview  This robot palletizer system was manufactured in 2017 by Italy BEMA. The system is designed for palletizing Bag-in-Box products (5L and 19L) for water and syrup applications. It consists of a robot palletizing system with Fanuc control, pallet magazine and stretch wrapper. The machine was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The system is fully operational, is available immediately, and can be visited on request. Maintenance was carried out twice per year. Technical data  - Capacity: - 5L BIB: 650 BIB/h – 7 pallets/hour Blodpoyyl S Eefx Amnsi - 19L BIB: 420 BIB/h – 13 pallets/hour - Formats: 5L / 19L Bag-in-Box - Application: Palletizing of water and syrup products - Configuration: Robot palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of Delivery  - Robot palletizer | BEMA | FANUC R-30iB | 2017 | Palletizing robot system - Stretch wrapper | BEMA | SILKWORM LS | 2017 | Pallet stretch wrapping unit - Pallet magazine | 2017 | Pallet handling system - Tooling set | 2017 | 2 tools for 5L and 19L BIB

Condition: used, Year of construction: 2012, Overview  This pallet stretch wrapping machine with conveyors was manufactured in 2012 by Not provided Tosa Group Bande Releuse. The machine is designed to secure palletized loads with stretch film for transport and storage. The system applies controlled film tension to ensure load stability and protection during handling and logistics operations. The machine is currently stopped (idle for one year) and remains installed and operational. Technical data  - Capacity: 25 pallets/hour - Application: Pallet stretch wrapping - Configuration: Stretch wrapping machine with integrated conveyors Bjdjypgi Nopfx Amnjli

Condition: used, Year of construction: 2014, Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Technical Details - Capacity Bodoyb Rycspfx Amnsli - Depend on layer formation - Equipped for the handling of: - KEG´s - Modul crates

Condition: used, Year of construction: 2005, Overview  The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope - Worked with tray/cartons of 8 units (4x2) Bledpfsxb Ar Ajx Amnji - Pallet loader - With shutter head - Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine

Condition: good (used), mileage: 1,25,087 km, power: 100 kW (135.96 HP), first registration: 05/2022, fuel type: electric, wheelbase: 3,280 mm, fuel: electricity, color: black, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 2, total length: 5,000 mm, total width: 1,850 mm, total height: 1,960 mm, loading space length: 2,550 mm, loading space width: 1,580 mm, loading space height: 1,300 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None Bledpfxjziuwge Amnsi - Leather / Fabric - Manual - Radio/Cassette - Reversing camera - Partition = Notes = Configuration: 4x2, Payload: 1027 kg, Unladen weight: 1988 kg, Gross vehicle weight: 3015 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 1000 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, Carplay, Color: Anthracite, Metallic, Maintenance manual, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 100 kW (134 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual, L2 75kWH 330Km WLTP Snelladen Airco Camera 1st Owner, Full Service History!, Tire type: All-season tires = Further Information = General Information Number of doors: 1 License plate: VPL-33-N Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 1 mm Weights Unladen weight: 1,988 kg Payload: 1,027 kg GVW: 3,015 kg Functional Loading area height: 60 cm Maintenance APK (Technical Inspection): Valid until 03/2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €325 per month (delivery van, 72 months); Ask for further information and conditions.

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table 4200 x 1500 x 350 mm Weight approx. 5000 kg Bsdpfx Amouzaafsnoli

Condition: like new (used), functionality: fully functional, total length: 2,300 mm, total width: 800 mm, total height: 1,000 mm, working height: 900 mm, table length: 2,250 mm, table width: 750 mm, Ulmatec brand extraction table, suitable for grinding and general workshop use. The table is in new condition – it has never been used. The workstation extracts and removes harmful fumes and dust generated during grinding and welding operations. Contaminated air is drawn through the table top to the connection port, where it is filtered by a filtration and ventilation unit or exhausted to the outside using an external fan. Bjdpfxezd Rhqo Amnsli Working dimensions of the table: 2.25 m x 0.75 m.

Condition: used, machine/vehicle number: IC1410, Year of construction: 2012, operating hours: 4,306 h, load capacity: 1,400 kg, lifting height: 3,410 mm, construction height: 2,190 mm, enginetype: Electric, manufacturer: Linde Blodsziruispfx Amnoi

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Blsdpfxjzdq E Ne Amnsi Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD TwinFlex edition with 12" touchscreen, double sliding table, swiveling on both sides, parallel fence with manual adjustment, parallel fence with fine adjustment, control panel at eye level, swiveling, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric swivel adjustment, AKE tool clamping system, automatic correction of the cutting height when the saw head is swiveled, simple axis calibration, machine diagnostics, operating hour counter, USB interface, dust-protected ----- Technical data ----- Swivel range: 0 - 46 °, cutting length: 3,000 mm, cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, Bjdpfx Aezgwl Ismnjli motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as intruding hands are detected, the saw head is rapidly lowered and stopped within a quarter of a second. TWINFLEX EDITION - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Swiveling on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Additional cost for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for swiveling on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Rapid lowering and lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm - Scoring system RAPIDO 180 mm ALTENDORF for swiveling on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, swiveling out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - Version HandGuard 2025 new The machine is sold with a new warranty of 1 year. The machine can be purchased at a special price. We would be happy to make you an offer.

Condition: used, mileage: 97,000 km, power: 90 kW (122.37 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,750 mm, loading space width: 1,600 mm, loading space height: 1,330 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Audio navigation system NAC 3-D, DAB with color display, front and rear parking sensors incl. rear view camera, increased payload, tailgate, fixed window, wooden floor in cargo area with anti-slip profile and side paneling (wood) with wheel arch covers, partition wall with window in cargo area, sound and thermal insulation, front side airbags, auxiliary heater Additional equipment: Driver and passenger airbags, dual passenger seat, onboard computer, driver assistance system: hill start assist, body type: panel van, lumbar support for driver's seat, adjustable, adjustable steering column, engine 2.0 L - 90 kW Blue-HDI FAP, wheelbase 3275 mm, spare wheel with standard tire, low emissions according to Euro 6, right sliding door, SCR system (AdBlue technology), full-depth side protection strips, visibility package, height-adjustable driver's seat, seat upholstery: fabric, steel rims 7x16, Start/Stop system, 12V socket in load compartment, 12V socket in center console, seat heating The vehicle is in good condition! Internal cargo area dimensions: L 2.75 m x W 1.60 m x H 1.33 m Last inspection at 96,028 km Only 1 vehicle key Bsdpfxozicavo Amneli Financing available through Santander Bank

Condition: good (used), ErgoPack 712E Pallet Strapping Machine A device for strapping loads with PP and PET straps Manufactured in 2016 Very good condition Model 712E with a heat sealer and a „tail” that passes through the pallet and feeds the strap to the operator without bending down. Manufacturer’s description: The ErgoPack 712 E is used to strap almost any type of load using PP (polypropylene) or PET (polyester) strap. The device is fully automatic (tensioning, sealing, and cutting the strap). It is characterized by high efficiency and ease of use, ensuring excellent results with minimal physical effort. The device is controlled from a control panel. Includes documentation, a charger, and a tool kit. Bsdpszdauhsfx Amnjli

Condition: good (used), Muro 1002 Paper Jogger Description: The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Bsdpfezdat Djx Amnsli Power supply: 230 V Weight: 40 kg

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR400 & PR350 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 17,040 mm Number of bays / racking row: 06 units, each 2,700 mm Number of levels plus floor level: 02 units Included in the scope of supply: 07x Pallet racking uprights, used Type: PR400 Material color: green Profile dimensions: U 120 x 60 x 4 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (welded frame) Bodpfezhwk Tox Amneli 4,020 mm high 950 mm deep 24x Pallet racking beams, used Type: PR350 Material color: blue INP profile: 80 x 42 mm Beam type: TRN1-270-08-I Clear span: 2,700 mm Hook: 5 hooks 48x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 28x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Shims, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, functionality: fully functional, table load: 80,000 kg, table width: 4,000 mm, Table for Boring Machine Škoda 3600 x 4000 mm (80 t) Blsdeyw Rkbopfx Amnoi For sale: heavy-duty table for a boring machine from the well-known manufacturer Škoda. Designed for machining large and heavy workpieces, ensuring excellent rigidity and stability. Ideal for heavy-duty machining applications. Technical specifications: Table size: 3600 x 4000 mm Max. load: 80,000 kg (80 t) Table in very good technical condition.

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table Blodpfx Asuppikemnsi -Scissor lift table: movable, with roller conveyor 500 x 2400 mm -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Stroke travel: 900 mm -Dimension when retracted: Height 240 mm -Dimension when extended: Height 1140 mm -Rollers: Diameter 40 x 500 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts Blodpsy Akpzjfx Amnji • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 Bsdpfx Amov I Akvsnoli - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, load capacity: 2,000 kg, fuel type: electric, mileage: 2 km, EXPECTED: 3 UNITS Bjdpfx Aey Rz U Romnsli Electric pallet truck, GERMAN brand STILL, year of manufacture 2020; ONLY 2 hours on the counter; Capacity 2,000 kg; Forks 2,400 mm; Battery equipped with automatic filling system, external charger. Video to follow.

Condition: used, Year of construction: 2003, total length: 3,300 mm, total width: 2,000 mm, total height: 1,600 mm, Colour: Green Weight: 800 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: - Main motor power [kW]: 5.5 - Max. cutting length [mm]: 3200 - Parallel stop displacement [mm]: 1350 - Roller table length [mm]: 3200 - Table width [mm]: 1450 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 110 - Controlled axes: Tiltable, Scoring unit height, Cutting height - Electrically adjustable axes: Cutting height, Scoring unit height, Tiltable - Manually adjustable axes: Rip fence - Options: Digital readout, Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Incremental - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 3300mm x 2000mm x 1600mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Blodpfx Amezh Hltsnji

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm Bljdpfownr Ehsx Amnji