Used Fast Radial Drill for sale (8,144)

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Dedpfxjur H I Nj Aa Neut Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, functionality: fully functional, Manufacturer: MAS-KOVOSVIT Machine type: Radial drilling machine Condition: used, good technical condition, ready for operation Technical specifications: • Drilling capacity in steel: 80 mm • Drilling capacity in cast iron: 110 mm • Arm length: 4,000 mm Djdpfx Aasx Uqcfs Neut • Vertical arm travel: 1,600 mm • Horizontal head travel: 3,470 mm • Spindle taper: Morse 6 • Spindle diameter: 65 mm • Spindle stroke: 475 mm • Spindle speed: 9–1,400 rpm • Feed rate: 0.035–2.8 mm/rev • Distance spindle nose to table: 710–2,785 mm • Max. workpiece height: 2,785 mm • Drilling diameter range: 80–300 mm • Swing range: 0°–360° • Total power: 13.8 kW • Weight: approx. 19.5 t • Overall dimensions (L×W×H): 6,010 × 1,800 × 5,205 mm Equipment: • 2 worktables Location: Machine in stock in central Poland. Further information available upon request.

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / Duedpfevmtlhsx Aa Net - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: good (used), Year of construction: 1971, Webo BR 35 V / 1250 Radial Drilling Machine Working Area Distance from spindle to column: smallest 280 mm / largest 1250 mm Distance from spindle or drilling distance to table top: smallest 0 mm / largest 900 mm Distance from spindle to base plate: smallest 200 mm / largest 1400 mm Drill diameter: smallest 860 mm / largest 2800 mm Swivel range: 2,200 mm / clamping diameter approx. 240 mm Clamping area: upper 650 x 500 mm / side 770 x 500 mm Drill spindle diameter 40/85 mm Speed: 30 - 1800 rpm Year of manufacture: 1971 For further technical data, please refer to the machine card. Item condition: used, immaculate, and well maintained. Dujdpfeihfw Nex Aa Net Auction items: Only the Webo BR 35 V / 1250 without the reversible clamp shown. This can be purchased individually or as a bundle in our other auctions. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more metalworking machines – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, drilling depth: 315 mm, rotational speed (max.): 2,000 rpm, throat depth: 1,600 mm, drilling capacity: 62 mm, column diameter: 350 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 62 mm Thread cutting in steel (St 60): M46 Thread cutting in grey cast iron (GG 20): M52 Maximum drilling depth: 315 mm Machine table dimensions: 2,400 x 1,000 x 200 mm Throat: 1,600 mm Drill head travel (horizontal): 1,250 mm Arm stroke (vertical): 585 mm Column diameter: 350 mm Speed range: 38 – 2,000 rpm Spindle taper: MK 5 Feeds: 0.06 – 1 mm/rev MACHINE DETAILS Total power requirement: 5.5 kW Djdpfexxrcxex Aa Nsut Dimensions & Weight Space requirement: approx. 2,490 x 1,050 x 2,780 mm Machine weight: approx. 3,800 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 60 mm, workpiece height (max.): 1,300 mm, spindle speed (max.): 1,450 rpm, spindle stroke: 350 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 60 mm Arm reach: 1,600 mm Workpiece height – max. approx.: 1,300 mm Reaming diameter in steel: 80 mm Reaming diameter in cast iron: 100 mm Thread cutting in ST 60: M55 mm Spindle speed: 29–1,450 rpm Drill spindle: 100 mm Morse taper: MK5 Spindle stroke: 350 mm MACHINE DETAILS Total power requirement: 7.5 kW Dujdpfx Asxxrbnja Not Dimensions & Weight Space requirements (L x W x H): approx. 2,600 x 1,100 x 3,200 mm Machine weight approx.: 4,600 kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, empty load weight: 5,500 kg, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, TECHNICAL DETAILS Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Dsdpfoxxraksx Aa Nsut Total power requirement: 8 kW Machine weight: approx. 5,500 kg

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Dodpfxop Atips Aa Njut Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Duodjuxrtfspfx Aa Njt Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: repair required (used), functionality: limited functionality, type of input current: AC, total width: 905 mm, total length: 2,160 mm, total height: 2,500 mm, throat depth: 1,200 mm, For sale: Caser pillar drilling machine including extensive accessories: Scope of delivery: - Clamping block - Cross table - Vice Condition / Function: - The machine is basically functional - Defect: The arm clamping no longer works - Likely cause is an issue with the hydraulic valve - All other functions work as intended Notes: - Sold as seen - Ideal for hobbyists, repair or for spare parts Dodpfeyhmkkjx Aa Njut No warranty or returns Price: negotiable Collection preferred, shipping by arrangement

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Dodpfjwnn S Rsx Aa Nout Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation Dsdpfxexpfgls Aa Njut

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually Dsdpfxexn A Spe Aa Nout probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Duodpfx Aexpfhvsa Njt Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty Djdpfx Aasmt Ed Ro Neut New paint RAL 7035/7031

Condition: used, Year of construction: 1960, arm length 1600 mm tool adaptor ja fabric-no. 9787 weight 4,6 t Dujdpfx Aox Ik Unoa Not with drill cube

Condition: used, Year of construction: 1969, arm length 1600 mm taper MK 5 Würfel Duedpsx H Txtofx Aa Not

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz Djdpsu T Ty Hjfx Aa Nout - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: not inspected (used), machine/vehicle number: 6104, functionality: unexamined, table width: 600 mm, table length: 1,200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, spindle speed (max.): 2,800 rpm, table height: 820 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Machining Data Drilling capacity in solid material (St 60): Ø 40 mm Drilling capacity in solid material (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Thread cutting (GG 22): M 45 Dimensions and Travels Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 Distance between T-slots: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 - 1,290 mm Swivel range: 330° Work table height: 820 mm Quill travel: 200 mm Column travel: 410 mm Table Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Duodpfx Aswvi I Nea Net Rapid traverse X-axis (at drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Speed: 15 - 2,800 rpm Feeds (stepless): 5 – 2,000 mm/min Accuracy according to manufacturer Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash in working area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Total height: 2,500 mm Total width: 1,400 mm Total length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital position display

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg Duedpst H Smyjfx Aa Njt dimensions of the machine ca. m

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 10 kW (13.60 HP), spindle mount: MK 6, height adjustment type: electric, total width: 11,000 mm, total length: 28,300 mm, total height: 31,600 mm, throat depth: 1,680 mm, overall weight: 5,700 kg, drilling capacity: 75 mm, quill stroke: 400 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 10 rpm, Radial drilling machine WRA 632 economic. Year of manufacture: 2000. Manufacturer: H. CEGIELSKI PL. Morse taper 6. Arm length 1600 mm, Max drilling diameter in steel – 65 mm, in cast iron 75 mm, Max tapping diameter in steel – M56, in cast iron M68, Duedetp Swwepfx Aa Not Spindle diameter 100 mm, Spindle travel 400 mm, Number of spindle speeds: 12, from 10–1600 rpm, Number of feeds: 8, from 1.14–2.04 mm/rev, Spindle reach from column: min 335 mm, max 1600 mm, Distance from spindle to base: min 390 mm, max 1680 mm, Base working surface 1760 x 1020 mm, Worktable (cube) dimensions 750 x 500 x 1200 mm, Overall dimensions (height x length x width) 3160 x 2830 x 1100 mm, Weight 5700 kg, Total power requirement 10 kW.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, column diameter: 360 mm, spindle speed (max.): 1,200 rpm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Dujdpfx Aajxn Nbdj Nst Electric central clamping Box table Hydraulic vice Coolant device

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm table-size 1280 x 500 mm surface area ca. 1250 x 480 mm turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm Djdewugrcjpfx Aa Neut boring chuck Schnellspannfutter 1-13 weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm Dedogmu A Sjpfx Aa Neut total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools

Condition: new, Year of construction: 2023, 50 mm Dusdpfswp S U Ssx Aa Nst 1250 mm 1345 - MK 5 bore depth 270 mm spindle turning speed range 56-1450 U/min