Radial drilling machine

RABOMA 12 V 1250

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Lrodewq Dpqspfx Adweg Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 Ljdpjrw Dknjfx Adwsrg tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Lsdpfjip Uqmox Adwjrg Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm Lsdjfqpxispfx Adwerg - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Lodpfjvtancox Adworg VAT is not needed if the sales happen outside of Turkey.

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Lrodpfoiv S Avsx Adweg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Lsdsw Ucyuspfx Adwjrg Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Lrsdpswki Apsfx Adwog Weight: 485 kg

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters Ledpfx Aetximvjdwerg - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Lodott Nd Repfx Adwjrg Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm