Used Felder Fb-710 for sale (2,277)

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D Lasdpfxoilq Hij Alyeh -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Dimensions: 480/185/H305 mm -Weight: 28 kg

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Laodpfx Alsvytfusyjh Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: good (used), functionality: fully functional, conveyor belt length: 2,040 mm, conveyor belt width: 120 mm, conveyor belt speed: 300 mm/s, total length: 2,040 mm, total width: 200 mm, total height: 130 mm, input frequency: 50 Hz, motor manufacturer: mini_motor, Item no.: 1000003718 Technical data: Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,040 x 200 x 130 mm (LxWxH) Width incl. cheek: 135 mm Cheek height: 30 mm Width incl. drive: 200 mm Ljdpfehpz T Aox Alysah Conveyor length: 2,040 mm Conveyor width: 120 mm Belt type: PVC, smooth Belt width: 120 mm Substructure: without Drive: Head drive Motor: Gear motor Motor data: mini_motor, 50 Hz, 230/400 Volt Conveyor speed: max. 0.03 m/s, constant Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 250 mm, conveyor belt speed: 100 mm/s, total length: 2,000 mm, total width: 330 mm, total height: 90 mm, motor manufacturer: Procon, Item no.: 1000003719 Used conveyor belt driven - 2,000 mm Technical Data: Manufacturer: AXMANN Year of construction: 2005 Overall dimensions: approx. 2,000 x 330 x 90 mm (LxWxH) Width incl. cheek: 255 mm Side panel height: 35 mm Width incl. drive: 330 mm Conveyor length: 2,000 mm Conveyor width: 250 mm Belt type: PVC, smooth Belt width: 250 mm Substructure: without Drive: Head drive Motor: Drum motor Motor data: Procon, 50 Hz, star 380-440 Volt, delta 200-240 Volt Conveying speed: max. 0.10 m/s, constant Special features: Condition: Used / fully functional Function test: OK Ledpfxjhp Dyxe Alyjah

Condition: good (used), Year of construction: 2023, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, conveying length: 9,600 mm, construction height: 800 mm, transport width: 600 mm, Item no.: 1000001360 Scissor roller conveyor - L: 3.9 - 9.6 m Technical data: Lajdpfx Aeq D Dlwelyjh Conveyor width: 600 mm Overall width: 724 mm Conveyor length: retracted: 3,895 mm / extended: 9,595 mm Total height / conveying height: 755 - 1,155 mm (infinitely adjustable) Number of supports: 6 Support design: including swivel castor, braked Roller spacing / centre distance: 55 - 150 mm Castor axle type: external thread, M8 Castor per axle: 3 Castor diameter: 50 mm Castor material: Plastic Castor colour: sky blue Cheeks material: galvanised steel Requirements for the conveyed goods: Bottom of the conveyed goods: level and largely closed, e.g. KLT, beverage crates, cardboard boxes, tyres Max. weight: 50 kg/m Minimum length: 180 mm (450 mm, with completely extended track) Other lengths and conveyor widths possible on request.

Condition: good (used), functionality: fully functional, roll diameter: 90 mm, roll width: 600 mm, roll pitch: 65 mm, total width: 650 mm, total height: 115 mm, total length: 2,590 mm, construction width: 650 mm, construction height: 115 mm, Type: Lightweight roller conveyor curve 90° Item no.: 1000003703 Technical Data: Manufacturer: unknown Ljdpfsqqk Disx Alyjah Year of construction: unknown Overall dimensions: approx. 2,590 x 650 x 115 mm (LxWxH) Width incl. cheek: 635 mm Cheek height: 115 mm Conveyor length: 2,590 mm Conveyor width: 600 mm Curve (degrees): 90° Curve radius, inside: 1,200 mm Curve radius, outside: 1,200 + 650 mm Roller type: Plastic / conical Rollers per axle: 1 piece Roller length: 600 mm Roller pitch, inside: 65 mm Roller pitch, outside: 102 mm Roller diameter: inside: 50 mm, outside: 90 mm Drive type: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 660 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 660 mm, construction height: 80 mm, TAF article number: 1000003815 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,970 x 660 x 80 mm (LxWxH) Cheek width: 660 mm Cheek height: 70 mm Conveyor length: 2,970 mm Conveyor width: 600 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 90 mm Lasdpfxjqag A Do Alyeh Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, Type: Lightweight roller conveyor Item no.: 1000003825 Overall dimensions: 805 x 550 x 65 mm (LxWxH) Cheek width: 25 mm Lsdpfoqcvllex Alysah Cheek height: 65 mm Conveyor length: 800 mm Conveyor width: 490 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 65 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW Laodpfx Aljflrg Tjysh space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: good (used), Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm Ledpfxeupphgs Alyeah -Weight: 43 kg

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 63 mm, total width: 1,935 mm, total height: 70 mm, total length: 1,935 mm, conveying length: 1,935 mm, construction width: 540 mm, construction height: 70 mm, TAF article number: 1000004163 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 1,935 x 540 x 70 mm (LxWxH) Cheek width: 540 mm Laedpjucwuyefx Alyeh Cheek height: 60 mm Conveyor length: 1,935 mm Conveyor width: 500 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 62.5 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: new, Year of construction: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors As an option, intake nozzle can be positioned at the top or bottom Uniform filter bags for all variants Chip collection in chip containers Ljdpjfc A Ursfx Alyeah The modularly designed models in the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the raw air-side fan, creating particularly effective overpressure filtration. Durable, high-quality components and an all-metal housing made of galvanized sheet steel provide investment security, as do the diverse retrofitting options. The particularly attractive price and short assembly times also contribute to making the AL-KO AAS the right choice. Technical data AL-KO AAS 3013 Intake nozzle 200 mm Nominal flow rate 2,500 m³/h Maximum flow rate 3,300 m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 liters Motor power 3.0 kW / 400 V Dimensions (L x W x H) 2486 x 578 x 2115 mm Weight: 139 kg

Condition: good (used), Year of construction: 2014, operating hours: 5,000 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, empty load weight: 4,000 kg, mileage: 5,000 km, Triplex duplex electric forklift, brand TOYOTA. Year of manufacture: 2014. Capacity: 2,500 kg. Lifting height: xxx mm. Mast height: 2,250 mm. Equipped with FREELIFT, SIDESHIFT and FORK SPREADER. Only 5,329 operating hours. Lodpfsz I Egtsx Alyjah Includes battery and charger. Watch the video on YouTube.

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Ledoy Auhuopfx Alyoah Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 10,505 h, load capacity: 2,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Lajdpfx Aoz I Hxqelysh Condition: Ready for use and fully functional Technical condition: good Battery voltage: 48V Side shifter

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Servo PANEL BENDER FBA 2016 CNC sheet metal bending machines are characterized by high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, switchgear cabinets, power electronics, elevators, etc. CNC control: Beckhoff Material and bending capacities Max. bending length: 2000 mm Max. diagonal of the sheet: 2400 mm Max. bending height: 165 mm Min. sheet thickness: 0.5 mm Maximum sheet thickness depending on material type Mild steel / carbon steel (410 N/mm²): 2.0 mm Stainless steel (660 N/mm²): 1.2 mm Aluminum alloy (265 N/mm²): 3.0 mm Machine and system data Number of servo axes: 12 Total power: 36 kW Machine weight: approx. 14,000 kg Dimensions (L × W × H): approx. 4.5 × 2.8 × 2.8 m Lajdoz Eq Tgspfx Alyoh This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: ready for operation (used), KUKA 1FK7101-5AZ91-1ZZ9-Z S07 servo motor, serial number: YFVN50665657012, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfxez E Alus Alyoah

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number YFVD50670459005, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodoz E Am Sjpfx Alysah

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number YFVN50665128002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfsz E Anijx Alyeah

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number YFVN50667716004, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lasdpez E An Aefx Alyeh

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z S18 servo motor, serial number YFVN50667716005, used, in good condition, 100% functional, scope of supply as shown in the photos. Lajdpjz E An Nsfx Alyeh

Condition: new, Siemens 1PH7107-7NF03-0BC0 compact asynchronous motor, serial no. YFCO37401101001 - encoder IN2048S/R D25, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Lodpsz Hh T Tefx Alyoah

Condition: like new (used), Year of construction: 1988, 🛠️ 4-Axis CNC Portal Milling Machine WALDRICH COBURG Type 17 – 10 FP A powerful 4-axis CNC portal milling machine from WALDRICH COBURG is offered for sale, ideally suited for machining large and heavy workpieces. The machine impresses with its robust construction, high performance, and extensive equipment. It also offers excellent potential for modernization / CNC retrofit tailored to customer requirements. ⚠️ Important Note The machine is offered without electrical equipment and without CNC control and is therefore perfectly suited as a retrofit project. ⚙️ Highlights ✅ 4-axis CNC portal milling machine with adjustable cross rail ✅ Powerful main drive: 75 kW ✅ Speed range up to 2,000 rpm with high torque ✅ Automatic pallet changer (3 pallets) ✅ Hydrostatic guideways in X & Y axes ✅ Through-spindle coolant system ✅ Ideal for heavy-duty machining & large components 📊 Technical Data 🔹 Distance between columns: 3,100 mm 🔹 Pallet clamping surface: 2,750 x 4,000 mm (extendable) 🔹 Number of pallets: 3 (automatic) 🔹 Max. workpiece weight per pallet: 40 t 🔹 X-axis travel: 5,000 mm 🔹 Y-axis travel: 5,440 mm 🔹 Z-axis travel: 1,000 mm 🔹 W-axis travel (cross rail): 2,500 mm 🔹 Spindle power: 75 kW 🧰 Equipment ✔️ Automatic pallet changer (3 stations) ✔️ Angle heads (RAA) incl. ISO 60 & ISO 50 ✔️ Special angle head ✔️ Spindle extension (650 mm) ✔️ Automatic head changing system 📍 Location Germany Laedpfsdu Hg Hjx Alyoh 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, photos, or a customized offer!

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,500 mm, conveyor belt width: 400 mm, conveyor belt speed: 300 mm/s, total length: 4,500 mm, total width: 620 mm, total height: 350 mm, overall weight: 110 kg, discharge height: 350 mm, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Manufacturer: Overbeck Year of manufacture: 2005 Overall dimensions (LxWxH) in mm: 4,500 x 620 x 350 Width including side frame in mm: 510 Width including drive unit in mm: 620 Side rail height in mm: 140 Conveyor length in mm: 4,500 Conveyor width in mm: 450 Belt type: PVC, longitudinal groove Belt width in mm: 400 Substructure: None Running surface: Steel Drive: Head drive Motor type: Geared motor Laodpsyzrncsfx Alyjh Motor data: 0.37 kW, 50 Hz Motor position: Right Conveyor speed in m/s: 0.3 Net weight in kg: 110 Condition: Used / fully functional Functional test: OK

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 656 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 656 mm, construction height: 80 mm, TAF item number: 1000003848 Manufacturer: TAF Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 2,970 x 656 x 80 Width incl. side panel in mm: 656 Side height in mm: 70 Conveyor length in mm: 2,820 Lsdpexq Egbefx Alysah Conveyor width in mm: 600 Substructure: none Support roller axle type: spring axle Support roller diameter in mm: 50 Support rollers per axle: 1 support roller Material: plastic Roller pitch in mm: 90 Drive: gravity Net weight in kg: 29 Special features: - Condition: used, fully functional Function test: OK