Used Fr. Korradi Uw 002 for sale (3,503)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Kdjdpfx Ahozuzw Dshsr Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, mileage: 6,500 km, power: 210 kW (285.52 HP), first registration: 10/2025, empty load weight: 5,140 kg, maximum load weight: 7,490 kg, tire condition: 10 %, axle configuration: 1 axle, fuel: diesel, gearing type: automatic, emission class: euro6, load capacity: 2,350 kg, Equipment: air conditioning, central locking, cruise control, onboard computer, rear view camera, • Volume: 31.5 m3 • DHOLLANDIA tailgate lift, 1500 kg capacity • Roll stops • 2 rear doors • Side door (driver's side) • Air conditioning • Rear view camera • Cruise control and speed limiter • Automatic headlights • Heated seat • Spare wheel • Sunroof • Internal box dimensions: 6.05 x 2.30 x 2.25 m Kjdpfx Ahozu T E Hjhsdr

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally and completely overhauled and tested, with 6 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not have any mechanical damage such as fractures, as these are irreparable. In such cases, a subsequent charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 113 ID 325 002-03 SN15341159 in exchange (exchange service), professionally and completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these cannot be repaired. In this case, a subsequent invoice of €1,000 including VAT will be issued. Kjdpoy Nq U Rsfx Ahhjdr

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 14934810 - with test report, professionally and completely overhauled and tested, includes a 6-month warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective core unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. Attention: You are bidding on a Heidenhain UM 113 ID 325 002-03 SN14934810 inverter on an exchange basis (exchange service), professionally overhauled and tested with a 6-month warranty, 100% functional, scope of supply as shown in the photos. In both repair and exchange procedures, your defective part must be free from mechanical damage such as breakage, as these are not repairable. If such damage is present, a subsequent invoice of €1,000 incl. VAT will be issued. Kdodpfxoy Nq Uwj Ahhor

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numrotoplus software Numroto software for simple milling cutters and cords, Numroto software for simple and complex drills Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Kdjdpfoyv Hv Rex Ahhjr Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Kdjdpozmh Nkjfx Ahhjr Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Kodpfoy Rq Hijx Ahhodr Location on request! Collection or transport can be arranged.

Condition: excellent (used), functionality: fully functional, Working dimensions mm 290×185 Ksdpfx Ajy Awkljhhjdr Vertical stroke mm 200 Table rotation 0-90° Vice capacity mm 170×135 Spindle speed rpm 2800-12000 Power kW 1.1 Voltage V 230-400 ±5% Pressure bar 7

Condition: ready for operation (used), Beckhoff C6930-0050 control cabinet industrial PC SN:3351156-002, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Kdjdpfsx Eqvyex Ahhsr

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Kdedsxvrm Sepfx Ahhsr

Condition: used, axle configuration: 3 axles, first registration: 09/2006, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,760 mm, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Refrigeration/freezer unit - Air suspension = Additional Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Tire tread depth left: 25%; Tire tread depth right: 25% Weights Unladen weight: 9,960 kg Payload: 29,040 kg GVW: 39,000 kg Functional Kodpezvcy Aefx Ahhedr Height of loading platform: 125 cm Refrigeration engine: Diesel and electric (15,309 operating hours diesel; 31 electric) Condition Damage: none Identification License plate: OJ-79-KZ

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos, used, in good condition, 100% functional, delivery scope as per photos. Kjdpfx Ahex Etazehjdr

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Kdodjzvbldspfx Ahher Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: used, mileage: 8,50,186 km, power: 331 kW (450.03 HP), first registration: 10/2018, fuel type: diesel, tire size: 315/70R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 650 l, color: red, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,160 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2018, Equipment: ABS, cruise control, fridge, parking heater, = Additional Options and Accessories = Kdodpfxjzvm E No Ahhsr - Radio/CD = Further Information = General Information Cab: SC Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Front axle: Tire tread: 40%; Reduction: single reduction; Suspension: parabolic spring suspension Rear axle: Tire tread: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,704 kg Payload: 12,796 kg GVW: 20,500 kg Layout Number of berths: 2 Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: used, mileage: 7,97,978 km, power: 290 kW (394.29 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,840 mm, loading space volume: 45 m³, loading space length: 7,650 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Antos 1840 4x2 Frigo Carrier 1250 MT VIN: 160500 Chassis / Components: * Wheelbase: 5,500 mm * Full / Air Suspension * Tires: 315/70 R.22.5 * Remaining Tread: Front ~20/90 %, Rear ~30% * Snow Chains * Aluminum Diesel Tank * 1 x Ad-Blue Tank * 2 x PVC Storage Boxes * LBW-Bär BC 2000 S4-L4 Cab: * Classic-Space S * 2300 mm, Tunnel 320 mm * Storage compartment above engine tunnel * Rearview camera, side camera * Automatic climate control * Radio * Lane Keeping Assist * Adaptive Cruise Control * AUX / USB Body: * Wilke Refrigerated Box * Refrigeration Unit: Carrier Supra 1250 MT * Diesel operating hours: 11,316 hrs, Electric operating hours: 1,635 hrs * Mains operation * 3 x Evaporators * 2 x Longitudinal Partition * 3 x Transverse Partition * Load securing rail, 1 x per side * Cargo space: 7.65 m x 2.48 m x 2.38 m, approx. 45 m³ * LBW Bär BC 2000 S4-4L, 2 tons lifting capacity, Year of manufacture: 2017 Kdodpfxjzu Udde Ahhor * Operating pressure max. 220 bar Engine / Transmission: * 394 hp / 290 KW // 10,677 ccm // Euro 6c * Powershift 3 / Automatic * Retarder * Differential lock Weights: * Gross Vehicle Weight: 18,000 kg * Tare Weight: 12,165 kg * Payload: 5,835 kg Other: * 1 previous owner * German vehicle * New MOT, available upon request // Next inspection: 02/2027 ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we attach great importance to customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day passes / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling customs formalities We will gladly help you in handling customs matters.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, working width: 350 mm, area performance: 1,540 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 15 l, battery capacity: 25 Ah, GHIBLI WIRBEL FR 15 M 38 BC SCRUBBER Kedewmc E Nopfx Ahhsdr NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) 2022 production year 380mm cleaning head (TB380) equipped with a new pad holder and a medium-hard pad, allowing work on any surface. Built-in battery charger facilitates daily use Polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. New, efficient suction turbine ensures high water suction power from the squeegee The device is equipped with a new, durable suction hose Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 380 Squeegee width (mm): 450 Efficiency (m²/h): 1,540 Number of brushes (pcs.): 1 Capacity of the clean water tank (l): 15 Capacity of the dirty water tank (l): 17 Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Dimensions (L x W x H) (mm): 865 x 430 x 1,160 INCLUDED: NEW SONNENSCHEIN GF GEL BATTERIES 12 025V (2x) NEW suction turbine 24V 250W NEW pad holder with red pad NEW suction hose Suction bar with oil-resistant rubbers Tenzi Normal fluid 5 liters - FREE

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,000 kg, The machine is running without any problems and will now be idle for a period of time as it is no longer needed. Travel ranges: X: approx. 485–500 mm Y: approx. 385–400 mm Z: approx. 380–400 mm Spindle: SK 40 DECKEL Dialog 2 / Contour 2 control system Table: universal, swiveling and rotating Ksdpfx Ahjzquftshedr

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg - Details: Kdedpfxezcng No Ahhor - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 45028, Dornier 2002 + Stäubli 2688H + 4 IRO/mc, operational, in good condition, 6 sets available. Location: Aleppo, Syria. Kdodpfx Aezurx Sjhhor 1 set of machine and jacquard: 28,000 euros.

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 732037.1, overall weight: 161 kg, For robot use. Pressing force: 16.8 kN Total stroke: 100 mm The TOX Pressotechnik EEB 002.010.A.002 hydropneumatic clinching pliers are a state-of-the-art solution for the efficient and reliable joining of various materials, particularly in the automotive and mechanical engineering industries. With their innovative hydropneumatic drive, these pliers enable precise and stable joints without the use of welding agents, making them an environmentally friendly alternative. The EEB 002.010.A.002 is characterized by its compact design, which makes it easy to integrate into existing production lines. In addition, the ergonomic design ensures comfortable handling, minimizing the strain on the operator. The tongs are equipped with advanced safety mechanisms that ensure safe operation and reduce the risk of operating errors. Kjdpfevcbylsx Ahhodr Thanks to its versatility, the clinching pliers are suitable for a wide range of applications where high demands are placed on joint quality.

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally overhauled and fully tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective part must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional invoice of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain (UM 113 ID 325 002-03 SN13307325) as an exchange (Exchange service), professionally overhauled and fully tested, with a 6-month warranty, 100% functional, and scope of delivery as shown in the photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage like breakage, as these cannot be repaired. In such a case, a follow-up invoice of €1,000 including VAT will be issued. Kedpfx Ahex Etanshsdr

Year of construction: 2002, condition: used, MTM 70/C stainless steel tube mill for Ø 76 x 4 mm This high-performance MTM 70/C tube mill, specially designed for the production of stainless steel welded tubes with excellent forming and welding quality. Equipped with a powerful TRUMPF laser welding system, this line provides reliable and efficient production for a wide range of stainless steel tube applications. Main technical specifications Manufacturer: MTM SpA Model: MTM 70/C Tube diameter range: 18 – 76 mm Tube thickness range: 1 – 4 mm Welding system: TRUMPF TWL60 – 12,000 W Laser Welder Maximum line speed: 25 m/min Production speed: - Up to 20 m/min at 1 mm thickness - Up to 6 m/min at 4 mm thickness Scope of Supply The complete line includes: - Single motorized uncoiler. (x2) - Strip threading pinch roll. - Strip joiner with pinch roll and straightener. - Strip accumulator with inlet and outlet pinch rolls. - Pull control device. - Edge preparation unit (edge scarfing). - Tube forming machine (forming – laser welding – sizing). - Single blade flying cut-off. - Output conveyors and tube ejection system. - Tube ends polishing. - Automatic tube packaging system for square bundles. - Output conveyor for bundles. - Available tooling sets for: 21.3 / 26.9 / 33.7 / 35 / 42.4 / 48.3 / 60.3 - Cooling unit make KLH (Germany) - Complete electrics, pneumatics and hydraulics. Advantages of this tube mill Kdedpfx Ahjy Uhx Rjhsr ✓ Ideal for stainless steel precision tube production ✓ High-quality laser welding technology ✓ Robust European construction by MTM ✓ Complete automated packaging solution ✓ Wide dimensional production range ✓ Suitable for industrial, automotive, construction and process industry applications Machine available subject to prior sale. Inspection can be arranged upon request. Tube diameter range: 18 – 76 mm Tube thickness range: 1 – 4 mm Maximum line speed: 25 m/min Welding system: TRUMPF TWL60 – 12,000 W Laser Welder Available tooling sets: for 21.3 / 26.9 / 33.7 / 35 / 42.4 / 48.3 / 60.3 Working Direction: Left to right Power supply: 380/50 V/Hz

Condition: used, axle configuration: 3 axles, first registration: 09/2002, color: other, Year of construction: 2002, Empty weight: 6.800 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Ksdpswhn Irsfx Ahhedr Axle 3: left 7 mm right 7 mm

Condition: used, functionality: fully functional, mileage: 2,73,359 km, power: 198.58 kW (269.99 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro3, suspension: parabolic leaf (spring), Year of construction: 2005, Short cab, 270 hp engine, 9 litres, Euro 3 exhaust emissions, Manual transmission, Tachograph with disc, Leaf spring suspension, Wheelbase 4300 mm, FERRARI 710 4-extension crane, trilateral tipper of approximately 5.15 m with aluminium sides TR5H60, Year of registration 12/2005, Km: 273,359, Payload: 7830 Kdsdpfx Ahsu I A Uxehor

Condition: used, functionality: fully functional, empty load weight: 5,400 kg, lifting height: 2,490 mm, Year of construction: 2014, operating hours: 2,081 h, total length: 5,550 mm, construction height: 2,500 mm, drive type: Diesel Motor, construction width: 1,950 mm, Other Speed class: 25 Technical condition: normal Kdjdpfxewlxgae Ahhjr Battery condition: normal