Used Facing lathes for sale (20)

Condition: used, Year of construction: 1982, Functionality: fully functional, Plane disc diameter 2600mm 3-axis digital display Iolhccqjwc Rcujtotf

Condition: excellent (used), Year of construction: 2007, The SIU250 lathe was completely overhauled in 2007. During this repair only the original cast iron was preserved on which a new rigid lathe was built from the ground up. The spindle, hydraulics everything is new on this machine. Lathe in perfect condition. Already professionally dismantled and stored in a warehouse in Pilsen, Czech Republic Operating system - Siemens Sinumeric 840D Main technical data - Working range: Height of tines above the bed - 1250mm Itolhccji Ay Dyeqtof Maximum running diameter - 2500mm Maximum running diameter above the caliper - 2000mm Maximum workpiece weight evenly distributed between tines (without supports) 160000kg Maximum permissible torque on clamping plate - 25000 kpm Maximum vertical component of the cutting force (pz) acting on the caliper - 24000kp Maximum speed when turning a workpiece (clamped between tines without supports) with a tailstock life of 4000hrs - 32.5rpm Spindle The spindle speed is continuously variable in 1st row - 0,32 + 7,1 rpm 2nd row - 0,8 + 18 rpm 3rd row - 2.15 + 47.5 rpm 4rd row 5,6 + 125 rpm Outer diameter of workpiece that can be clamped with jaws Maximum 1900mm Minimum 500mm Minimum diameter of workpiece clamped by jaws when transmitting maximum allowable torque - 625mm Speed feed of jaw 750mm/min Cone in spindle metric 1:10 size 200mm Suport Longitudinal feeds in three rows continuously I row - 0,2 + 10mm/min II row - 5 + 1000mm/min III row 1000 + 3000mm/min Translation page -13- Transverse sledge feeds in three rows continuously 1st row - 0,1+ 5 mm/min 2nd row - 2,5 + 500 mm/min 3rd row 500 + 1500 mm/min Cross-slide feeds continuously 0.071 + 710 mm/min Travel length of the cross slide 700mm Running length of knife sledge 180mm Max. feed force in transverse direction 16000kp Max. knife cross section for normal knife holder 80 x 80 Horse Pinole diameter - 560mm Taper (spike) in spike sleeve metric 1:10 size 160mm Pinhole extension 250mm Travel speed of the tailstock on the bed 2000mm/min Sheave support Passing diameter Max. 1250mm Passing diameter MIN 800mm Maximum load capacity 60000kg Circular and pulley support: Passing diameter max - 800mm Passing diameter min - 360mm Max load capacity - 60000kg Centering sleeper Passing diameter max - 2000mm Passing diameter min 780 Max load capacity - 60000kg The machine was used for final machining of crankshafts and rotors. Machine for sale including accessories. spare knife head and many tools. Can be sent via whatsapp video machine.

Year of construction: 1985, Condition: good (used), Make: ZERBST Type: DP 1/S2 Year: 1985 Specifications Metric US Standard DBC Turning Length 3000 mm Swing over bed Ø Ielhccokvn Abeqtjtf 2500 mm Swing over cross slide Ø 1500 mm Spindle bore 102 mm Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1979, Condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Itjlhccenl D U Ssqtof Free location Saxony

Condition: good (used), rotational speed (max.): 180 rpm, power: 34 kW (46.23 HP), overall weight: 21,000 kg, Distance between centres: 3000 mm / Swing: 1800 mm over bed 2800 mm in gap Weight workpiece: 8.000 kg max. Chuck: Ø 1800 mm Spindle speeds: 1,8 - 180 rpm Spindle bore: 220 mm 3-axis DRO: Easson ES-14 Featured with: - Engine powered tailstock - Various tools Iolhcsrt Tfhjcqtstf - User manual Country of origin: Germany Motor power: 34 kW Machine weight: 21.000 kg

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Iolhcev Rcl Sscqtetf Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Frequency: 50 Hz

Condition: used, Year of construction: 1960, Technical details: faceplate diameter: 1400 mm turning diameter over support: 1200 mm turning length: 2000 mm centre distance: 2000 mm turning diameter over bed: 1400 mm center height: über Bett: 710 mm spindle bore: 80 mm revolution per minute: 1,8 - 90 / 18 step U/min feed range: längs: 0,28-2,8 und plan: 0,18-1,8 mm/min total power requirement: ca. 22 kW weight of the machine ca.: 15,0 t machine dimensions LxWxH: 6,0 x 2,0 x 2,0 m Facing Lathe / Heavy duty 3 bed lathe Design: Three-track bed with tailstock and headstock Faceplate made of gray cast iron 4-fold steel holder Itslju Ixmdshccqtef Tailstock with fixed center point Maximum workpiece weight with flying clamping: 2500kg largest workpiece weight between the centers: approx. 8000kg various accessories see photos Floor plates not in delivery scope, because not necessary for that type of machine. i.D. *

Condition: used, Year of construction: 1952, turning diameter over bed 2500 mm Ielhovt Ek Njccqtetf turning diameter over slide rest 3000 mm turning length 5000 mm total power requirement 12 kW weight of the machine ca. 23 t

Condition: used, Year of construction: 1953, turning length / mm Ijlhcceua Iw Toqtjtf turning diameter over plate // mm faceplate diameter / mm Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: good (used), Year of construction: 1968, Functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Itjlhccer Nzm Tjqtjf Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: reconditioned (used), Year of construction: 2025, Functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: Iolohyg Iyohccqtetf - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: good (used), Year of construction: 1988, Functionality: fully functional, Description: Heavy duty high precision horizontal lathe with hydraulic clamping system Rohm, slide with two working positions, Sauter 4 side tool holder, circular turning unit, CNC 6 axes, tailstock, chip conveyor, suitable for both, high volume material removal and high precission turning. Machine modified with 2000 mm face clamping plate and increased in size. A one-owner machine, total time 88.000 hrs, used only for high precision manufacturing of printing cylinders. The machine comes with the device COF which allows the workpiece to stay in place while the COF works around it. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers 2200 mm Ibkanx9 Turning diameter over slide: 1400 mm Turning length: 6000 mm Clamping 3 chucks table 2000 mm Spindle bore: 200 mm Attachment for circular turning Weight of the workpiece 4.500-40.000 kg Revolver head: 4 pcs. Spindle r.p.m. range: 4 - 400 r.p.m. Main motor Siemens 95,5 kW Max torque 40000 Nm Overall power demand: 125 kW Control: CNC SIEMENS 8T, 6 controlled movements Machine weight: 43 000 kg Itolhccovfdbwoqtsf Space required: 13.000x4.000

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Itslhjvbhiqjccqtjf Headstock with faceplate and main drive 2x support Tailstock Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. *

Condition: good (used), Functionality: fully functional, Renovated in 1992. Itolhccoulzpzsqtsf

Condition: new, Brand new, highly stable CNC head turning machine series from the KDB series. Whether you desire conventional or CNC-controlled precision, we offer you the optimally fitting solution with controls from Siemens, Fanuc, or Fagor. Choose from our extensive range of accessories, including the optionally available C-axis and much more. KDB 2000 available immediately. Further models with the following technical specifications available as CNC and conventional: TECHNICAL DATA: Faceplate diameter: 1600|1800|2000 | 3000 mm Turning diameter: 1600|1800|2000 |3000 mm Turning length: 700 mm Spindle bore: 230 mm Spindle nose: A2-15 Spindle speeds: L:10~50, M: 50~150, H: 150~400 1/min Spindle motor: 37 kW Travel - x: 900|920||1020 mm Travel - z: 1500 mm Servo motor X-axis: 1FK7101, 4.3 kW, 27 Nm Servo motor Z-axis: 1FT7105, 11.7 kW, 65 Nm Rapid traverse in X and Z directions: 5 m/min Machine weight approx.: 15 t Space requirement approx.: 4950mm (with conveyor: 6610mm) x 3100mm x 2750 mm - Conventional or with CNC control Siemens/Fanuc/Fagor - Optional with C-axis and additional extensive accessories - Bed longitudinal or transverse Itslhcji Aqdqscqtsf - Also available with tailstock and more. Are you interested in the brand new, highly stable CNC head turning machine series from the KDB series? Do not wait any longer and contact us today to find the optimal solution with controls from Siemens, Fanuc, or Fagor. Choose from our extensive range of accessories, including optional C-axes and much more. The KDB 2000 is available immediately, so do not hesitate! Send us your machine requirements, and we will adapt the machine to your needs. Take advantage of the favorable leasing and hire purchase conditions from our leasing partners. Just ask us about it! We are happy to organize the delivery free to your doorstep, including installation, commissioning, and turnkey handover with instruction. Do not hesitate and contact us now! Send us your machine requirements, and we will tailor the machine to your needs! Image shows KDB 2000 (turning diameter 2000mm) Take advantage of the favorable leasing and hire purchase conditions from our leasing partners: Inquire with us! We are also happy to organize the delivery free to your doorstep, including installation/commissioning and turnkey handover with instruction.

Condition: used, Year of construction: 1975, Various accessories for a facing lathe Make: TADU Model: F 650 Year of manufacture: approx. 1975 - Main spindle ASA mounting A 1-8", spindle bore 60 mm Price: 1.495,00 € - Drive unit for the headstock 8 - 42 and 40 - 200 rpm, 5.5 kW Price: 2.280,00 € plus VAT Itslhjctgb Teccqtsf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Rotary finishing machine with six work stations. Siemens SIMATIC S5 controller Clamping sleeves up to 16 mm diameter or HEX15 Width: 144, Depth: 119, Height 510 cm Electrical cabinet 120x48x106 cm Itolhccqjqhk E Rotsf Hydraulic power pack 85x70x163 cm Weight approx. 2800 kg

Condition: used, Year of construction: 2001, Functionality: fully functional, TECHNICAL DETAILS Swing diameter over bed: 1800 mm Turning diameter over bed: 1480 mm Clamping disk diameter: 1800 mm Control: Sinumerik 810D Speed: 6 - 200 rpm Islhetxzgneccqtstf X-axis travel: 740 mm Z1-axis travel: 226 mm Z2-axis travel: 360 mm Distance multifix clamping disk: 500 mm MACHINE DETAILS Machine weight: approx. 5500 kg EQUIPMENT - Electronic handwheel - Multifix steel holder device

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. Ijlhccqju Ix Sgjtotf spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: good (used), Functionality: fully functional, Renovated in 1998. Itelhoulzmgjccqtjf