Used Głowica Frezarska Ø80 Mm Walter Sk40 Głowica Frezarska Walter Sk40 – Xtra-Tec for sale (74,765)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Kledpfx Ajmhhx Isayer Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Kjdpfx Asmhhyajayjlr The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Kedpfx Aajh Ek Dasyolr The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Kljdpfomhh Anox Aayor Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Kledpfx Asmhhf Seayer - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Klsdemhhl Hopfx Aaysr Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Kodpfx Aaomidyfjyelr Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Klsdpfemkixwsx Aayor Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Kljdpfx Aemhh Dtjaysr - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Kedogd Uifspfx Aayslr Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Year of construction: 2021, operating hours: 445 h, condition: good (used), functionality: fully functional, Go-Tec GP M252 insole milling machine, year 2021, 445 operating hours, with vacuum table, 3D insole printer GP Mike Cubix, 3D strap printer with filament dryer GP LP333, GP Laserscan 3D total foot one, GP Laserscan 3D Flat 2, cyclone extraction, all from 2021. Kjdpfx Aey D Ndgsayslr

Condition: used, axle configuration: 2 axles, first registration: 02/2011, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 11,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Further Options and Equipment = - EBS (Electronic Braking System) - Tail lift - Central lubrication = Remarks = Number of axles: 2, Payload: 24,680 kg, Own weight: 8,320 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air suspension, ABS, EBS, Body year: 2011, Axle type: BPW, Tail lift = Further Information = General Information Cab: Day cab Registration number: OL-06-GS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Weights Unladen weight: 8,320 kg Payload: 24,680 kg Gross vehicle weight: 33,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price classes. Why buy at Kleyn Trucks? Easy! • Large, fast-changing stock • Recognisable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services Klodpjw Da A Tofx Aayjr • The assurance of 'recognisable quality' • And much more.... Please visit our website for special offers and our full stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, loading space length: 10,300 mm, loading space width: 2,500 mm, loading space height: 2,590 mm, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Payload: 24,180 kg, Unladen weight: 8,820 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2010, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Model: SLX Whisper, Cooling unit: Diesel/electric, Electrical unit hours: 1, Diesel unit hours: 3,893, Wall thickness: 45 mm, Type of cooling: Chilling and freezing, Axle type: BPW, Tail lift, Tail lift design: rear liftgate, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel, Tail lift size: 250x200, Battery for access ramp = Further Information = General Information Cab: Day cab Registration number: OL-66-DV Drivetrain Fuel type: Diesel Transmission Kljdpfew Da Ayjx Aayer Transmission: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lifting axle; Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Weights Unladen weight: 8,820 kg Payload: 24,180 kg Gross Vehicle Weight: 33,000 kg Functional Tail lift: Dhollandia, rear liftgate, 3,000 kg Refrigeration unit: Diesel and electric (3,893 hours diesel; 1 hour electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Kedpfjw Da A Hox Aayelr Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: used, loading space length: 7,700 mm, loading space width: 2,480 mm, GERMAN DEALER offers: BDF platform 7.82m with 4 central stakes Craneable Lashing rings Loading area: 7700 mm x 2480 mm Many swap bodies and trailers in stock! Kjdpjy D Dw Uofx Aayjlr ##### PLEASE CALL – NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO commercial vehicles have been delivering since 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: used, centre height 100 mm weight of the machine ca. 30 kg Klsdpfewntzkjx Aayjr dimensions 300 x 250 x 400 mm

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Doja Tec Model: BK2-VA with speed controller stainless steel construction for coating products Connection: 400V, 16 A CEE plug + compressed air Dimensions: 3000 x 970 x 1380 mm (W x D x H) Used machine Option: Ksdpfxoyy Sk Is Aayslr Delivery service directly into the bakery

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,200 kg, The machine is in excellent condition and has been regularly inspected. Klsdpsy Ami Djfx Aaysr

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Width: 1,000 mm • Frame depth: 600 mm • Load capacity per shelf: 150 kg • Number of shelves per bay: 6 pieces • Finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately from stock. Tiered prices per unit (net, plus VAT): Starter bay: 1 – 5 bays: €92.30 6 – 20 bays: €88.61 21 – 50 bays: €84.92 from 51 bays: €81.22 Add-on bay: 1 – 10 bays: €63.55 11 – 25 bays: €61.01 26 – 75 bays: €58.47 from 76 bays: €55.92 Available from our warehouse in Nordhorn. YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION Ksdpfxjuk E Thj Aayslr We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Additional costs depend on the delivery location and shipment size, and can be quoted individually upon request. TERMS OF PAYMENT Payment terms to be agreed upon when placing the order. The quoted price is a per unit/net price, or as stated in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used products for warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions. Four factors for your success – The four pillars of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. Kedpfx Aaouba Rbjyolr YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min Kedpfx Aaeyz Dwcsyelr A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, total width: 2,470 mm, total height: 1,350 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2026, Axle configuration Tyre size: 385/65R22.5 Make axles: VALX Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.855 kg Carrying capacity: 39.145 kg GVW: 44.000 kg Maintenance Kedpey Ec A Eofx Aayslr APK (MOT): tested until 04/2027 Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Registration number: OX-80-FD Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Klodeyvgp Tjpfx Aaysr Device in good technical condition Visible signs of use Machine is operational

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Klodpfx Aoy A Smbjayor

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Kledpfsh Dv Uqox Aayjr Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)