Heavy duty shelf

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Ksdpomhhf Sofx Acwsdw The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2017, condition: refurbished (used), Features and benefits: • Processes up to 30 pieces/minute • Adjustable peeling depth using ABL patented peeling system • Self-adjusts for different fruit shapes/types • High yield rate: 50% and up on fully peeled fruit Kdsdpepv Uz Nofx Acwsw • Reliable and robust performance for industrial and non-industrial processes • Maximizes productivity while reducing production costs OP30 is a semiautomatic peeling machine for citrus (orange & grapefruit), kiwi and mango. The machine can be used to peel one fruit variety at the time or even two separate fruit since it is equipped by two peeling head. When processing citrus fruit or kiwi the speed rate is 30 fruit x minute , while the speed it’s reduced to 24 fruit x minute when processing mango. Fruits are positioned manually into the feeding cups by one operator, if processing citrus a coring option is also available. Two self centering hand will center and transfer the fruit between two mandrels , these will put in rotation the fruits to allow their peeling. The ABL patented peeling head will gently perform the peeling following the fruit shape according it’s dimension with the possibility to adjust the peeling depth also with the machine in function. Once peeled two blades will remove the two extremity (not for mango) and then release the fruit onto the peeled fruit conveyor. serial number: 201, year of construction: 2017, weight 1550 kg, 415 V, 50 Hz, 4.0 kW, total dimensions: 2650 mm x 1700 mm x 2100 mm. We have three machines. All are refurbished with new PLC and electronics.

Condition: good (used), 14000l stainless steel tank, AISI316L steel grade, Ksdpfjm Tv D Rex Acwjdw Diameter 2.30m, Height 3.50m, Cylinder wall thickness 2.1mm, Thickness of the bottom 3.4- 4 mm, 30 units available The tank requires a concrete spout or a platform on which the drain valve will be based (platform available at additional cost)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m Kdodpefg E H Tsfx Acwsw How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: good (used), functionality: fully functional, Year of construction: 2003, working width: 4,300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, pressing force: 300 t, Equipment: safety light barrier, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Kodswc Sbrspfx Acwodw Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Kjdpfxjibh S Hs Acwodw Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. Kjdpjq Nl Aqofx Acwsdw -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Two coring lines Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Ksdpfoffwfyox Acwodw Can work separate as well in line with cabbage shredder SS80 7500kg/h Various electrical connections and standards available on request;

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Kdodpfx Acog U Uv Rjwjw Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Year of construction: 2025, condition: new, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and good customer communication are our top priorities. Accordingly, we focus on existing machines on the market, analyzing and optimizing problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Ksdpfx Acerci U Hewodw Length: 4,890 mm Weight: approx. 800 kg Power: 50 Hz 360 V Power consumption: 1.64 kW Air pressure consumption: 1 m3/10 bar / 1 min. Peeling: 40 - 80 pieces / min Peeling diameter: 35 - 100 mm of unsorted onions