Used Gema Center Lathe for sale (17,870)

Year of construction: 1960, condition: ready for operation (used), Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible. Ibodpfjylbtbex Aiyob

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Isdpfx Aox Th Ngeiyebb

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Isdpfx Aievy E A Ssyebb

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Iodpfx Aijzukufjyebb

Condition: good (used), functionality: fully functional, Type 4 Ibsdpfx Aiszt Sytjyob Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: >> Year of manufacture 2008, machine no. DB-01 >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless Ibjdpjzl T Trofx Aiyob >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck 160 mm with 5 sets of jaws >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock Ijdpfx Aiszl T Hxeyjbb >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Iedpfszminusx Aiyjbb Type: Champion CP 1540 VS Year of manufacture: 2015 Condition: used Scope of supply: - Coolant system - Machine light - Machine feet - Documentation - Chuck jaws - Digital display - MultiFix B Further information available upon request.

Condition: good (used), Year of construction: 1986, Muller lathe, model 1500 Ibodjzuvxcspfx Aiysb - Max. turning diameter: 700 mm - Distance between centers: 1500 mm - Bore diameter: 72 mm - Year of manufacture: 1986 - Rapid traverse rate on the Z-axis (cross slide)

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Iedpfx Asy Icbaoiysbb

Year of construction: 2000, condition: ready for operation (used), Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible. Iedpfx Aeztdt Ejiyobb

Year of construction: 2003, condition: ready for operation (used), Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible. Isdpfx Aeztdtljiysbb

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module Isdpfxszp Nkno Aiyjbb 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Ibodpfxszu Ngge Aiyeb Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev Ibedsyud Itopfx Aiyjb 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 77 mm, turning diameter: 505 mm, turning diameter over bed slide: 505 mm, center height: 250 mm, center width: 1,500 mm, turning length: 1,500 mm, quill stroke: 180 mm, quill diameter: 80 mm, quill travel distance: 180 mm, total length: 3,095 mm, total width: 1,100 mm, total height: 1,525 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 13 rpm, swing diameter over cross slide: 270 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 40 mm, metric thread steps: 29, bed width: 340 mm, Turning diameter in gap: 700 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 13 rpm, swing diameter over bed slide: 505 mm, overall weight: 2,400 kg, rapid traverse X-axis: 1 m/min, rapid traverse Z-axis: 3 m/min, quill mount: MK 5, three-jaw chuck diameter: 250 mm, Trens SN500 Classic — Reconditioned Center Lathe, 2001 We offer this fully reconditioned Trens SN500 Classic center lathe, year of construction 2001, completely overhauled by original factory technicians to near-new condition. Machine details Manufacturer: Trens Model: SN500 Classic Year of construction: 2001 Machine type: manual universal center lathe Control type: manual Max. swing over bed: 505 mm Max. swing over cross slide: 270 mm Max. swing in bed gap: 700 mm Distance between centers: 1500 mm Height of centers: 250 mm Spindle nose: BAJONET DIN (ISO702-III) B8 Spindle bore: 77 mm Spindle speed range: 12.5–2000 min⁻¹ (18 gears) Main motor output: 7.5 kW Max. torque: 1450 Nm Standard toolpost: 4-way toolpost, max. tool size 32×25 mm Tailstock sleeve: MORSE 5, diameter 80 mm, travel 180 mm Metric threads: 29 pitches, 0.5–40 mm Whitworth threads: 38 pitches, 1–80 TPI Machine dimensions (H×WxL): 1525mm ×1100 mm x 3095mm Weight: approx. 2400 kg (without accessories) Included accessories: Iodpjzndb Esfx Aiyebb 3-jaw chuck TOS Svitavy IUS 250/3-2-M1, ø 250 mm, B8 mount 4-jaw chuck Bison 4335-315-8, ø 315 mm, B8 mount Steady rest, ø 10–115 mm, with 3 friction contacts (rolling contacts available as paid option) Follow rest, ø 10–115 mm, with 2 friction contacts (rolling contacts available as paid option) Large steady rest I., ø 110–250 mm, with 3 friction contacts (rolling contacts available as paid option) Reconditioning scope All guideways ground and hand-scraped Spindle ground and reconditioned Tailstock quill ground All new bearings, including spindle bearings New gears New paint finish New plates (speed, feed, and thread charts) Machine is in excellent mechanical condition and ready for immediate use. Available for inspection. Geometric protocol available. Electronic machine manual on USB. For questions or further details, feel free to contact us by message or phone.

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Ibodoziwy Repfx Aiyob Center height: 180 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. In ready-to-use condition.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 14076, Offer 26143 Technical data: - Maximum turning height 165 mm - Maximum turning length 750 mm - Turning diameter over bed 330 mm - Turning diameter over compound slide 170 mm - Spindle bore 42 mm - Taper of tailstock quill MK 3 - Travel of tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + facing - Metric thread pitches - Inch threads - Module threads - Drive 400 V / 1.5 / 2.8 kW - Including: - 2 x 3-jaw chuck - Steady rest - 4 x HSS tool holders - Various turning tools - Space requirement approx. B 1800 x H 1150 x D 900 mm - Weight approx. 800 kg Ibodpfx Aijzdq I Roysb

Condition: good (used), Year of construction: 1975, Offer 24204 Technical data: - Maximum swing diameter over bed: 420 mm Iedpfxox Tqg Io Aiyebb - Centre distance: 1000 mm - Spindle bore: mm - Tailstock quill taper: MT 4 - Tailstock quill travel: 200 mm - Spindle speeds: 40 - 2000 rpm - Longitudinal & facing feeds - Metric thread pitches - Imperial threads - Module threads - Drive: 400 V - Includes: 3-jaw chuck - SWS steel toolholder with 3 inserts - Space required: approx. W 2800 x H 1250 x D 950 mm - Weight: approx. 2200 kg

Condition: excellent (used), Lead/Guide spindle lathe Manufacturer: Dalian Inventory No. 3857 Type: CDS 6232 Year of manufacture: 2008 * Distance between centers: 750 mm * Center height: 170 mm Ibsdpfx Aozrvn Esiyjb * Swing over bed: 340 mm * Spindle speed: 59 - 2100 rpm * Spindle bore: 52 mm * 2-axis digital display SINO * 3-jaw chuck * Coolant system Machine weight: approx. 850 kg

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: 3-axis digital display The machine comes from a vocational training center and is in very good condition. Ijdpfx Aezq R Ecsiysbb

Condition: good (used), functionality: fully functional, Universal lathe SUI40/1500. Ibedpozpgaajfx Aiyjb

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual Ijdeyq Stpjpfx Aiyobb machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,- Ijdpfx Asyq Stisiysbb

Condition: new, neu Bulgarien 140320 € 2652.05 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 Ibsdpfx Aioyq Stcoyjb 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning lenght 5.000 mm € 160150,00 turning length6.000 mm € 177240,00