Used section steel shears 0 - 49t punching power for sale (38)

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: Kledpfshxzmcsx Adwol The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Klodpfxsxu Ugxe Adwsl Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: used, Technical details: Klodpfxju Icghe Adwol round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm Kedpfjwp Edajx Adwell square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 -Dimensions: 1230/680/H640 mm Kedpex Srlpofx Adwell -Weight: 419 kg

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Kjdpfx Aok D Nt Dodwell Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: Klsdpof Ek H Uefx Adwel -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm Klsdpfx Adsfndy Newel -Weight: 1080kg

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Klsdpfx Adjyayiwewjl

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design Kjdsxaat Uopfx Adwell - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: excellent (used), Year of construction: 2017, 1 used hydraulic 5-station combined high-performance profile steel shear Technical Specifications: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm Ø 38 x 8 mm Throat depth: 175 mm Max. stroke: 50 mm Number of strokes: 20 / min Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tool size: 100 x 100 x 8 mm Flat Steel Shear Max. material width x thickness: 200 x 15 mm 300 x 12 mm Blade length: 316 mm Mitre cut 45° (leg length x thickness): 80 x 10 mm Working height: 955 mm Bar Steel Shear Kedsxz Dn Eopfx Adwell Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U/I-profile (accessory): 80 x 45 mm Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Motor power: 4 kW Machine dimensions: approx. 1500 x 950 x 1680 mm Machine weight: approx. 1400 kg Accessories / Special Features: • Punching station, flat steel shear, angle steel shear, profile steel shear, notching station • Stepless stroke adjustment • Heavy-duty and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangle notching station / V-notch tool • With MUBEA holder for punch No. 1, No. 2 and No. 3 as well as die No. 30, No. 45 and No. 60; use of punch and die No. 4 and No. 80 possible as option • Punch holder with bayonet coupling • Advantages of punching over drilling: - Significant time savings – short cycle times - No chips - No coolant required • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Ksdpfx Adsw Ip D Hewell Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, functionality: fully functional, Year of construction: 2003, Capacities: Force: 400 kN Punching: Ø20x15 mm Ø38x8 mm Shearing flat material: 200x13 mm 350x6 mm Angle iron: 80x80x8 mm Solid material: Ø30 mm Kjdox Ttwcspfx Adwoll 25x25 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 576892, Offer 25455 Hydraulic Flat Profile and Bar Steel Shear with Notching Device and Punching Station Technical Specifications: - Flat Bar Shear: cuts up to 300 x 15 mm - Profile Steel Shear: cuts L-profile steel at 90° up to 120 x 12 mm - Bar Steel Shear: Klsdpex S Ib Hsfx Adwol - cuts round steel up to 40 mm - cuts square steel up to 35 mm - Notching Device: with square notching unit 100 x 42 x 10 mm - Punching Station: - punching force: 600 kN - with stop table - throat depth: 220 mm - punches in steel up to 28 mm Ø in 15 mm or 38 mm Ø in 11 mm - various punch and die sets included - Drive: 400 V / 4 kW - Space requirements: approx. W 600 x H 1550 x D 1500 mm - Weight: approx. 1300 kg

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage Kjdpscc Ubujfx Adwjll -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: new, messurements (LxWxH): 1500x950x1680weight approx.: 1,165total power requirements: 4square steel bar: 25round steel: 30cutting pressure: 45throat depth: 220flat steel shear: 200 x 15 0der 300 x 12notching (strenght x width x depth): 8 x 35 x 75punching - round: 22 x 15 oder 38 x 8 oder 100 x 3angle iron cutting 90° or 45°: 100 x 100n x 10 oder 70 x 6 - 5 Arbeitsstationen - mit 1 Fußauslöser Kjdpfod Ab Hzox Adwell - hydr. Antrieb - Tisch an der Stanzstation und Ausklinkstation mit Anschlag - Betriebsanleitung in DEUTSCH und ENGLISCH Wir haben viel Referenzen!

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Kjdoxqqphspfx Adwsll Support table on the punching side with stop cams A range of tools is included in the price

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Klodpfx Adjxyyz Sjwel Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic - 4 stations Kljdpfeu Havwsx Adwel - Foot control - Emergency stop - 400V

Condition: excellent (used), machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Ksdpfsqlaifox Adwoll Punches e.g. 30 mm holes in 10 mm steel Shears 300 mm to 12 mm steel on the flat steel shear

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Round material up to: 20 mm Kjdodp U Apjpfx Adwsll square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm Klsdpsby Dq Rsfx Adwol electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Klsdpfxonacy To Adwel Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Kjdev Ta Ucjpfx Adwell Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. Kodpfx Adjkzk Hvowsll DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST