Used Glaesner Economic 1000 for sale (8,628)

Condition: new, Travel X / Y / Z axes: 1020 / 550 / 635 mm Table size: 1200 x 550 mm Spindle speed: 12,000 rpm Spindle interface: 40 BBT Control: Fanuc 0i MF Plus Dimensions: 480 x 230 x 255 cm Weight: 8,000 kg Equipment: Tool stations: 30 Iedpoy Inuljfx Am Dsat Coolant through spindle 20 bar Air through spindle (must be ordered with CTS) Chip conveyor Chip container Work area chip flushing

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Iajdpoiy Dl Hsfx Am Dot Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: like new (used), Year of construction: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic woodchip heating system ✔ Lambda control + negative pressure regulation ✔ Moving grate feed ✔ Automatic cleaning and de-ashing ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial design Suitable for: - Woodchips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: - 2x boilers - 2x screw conveyors - 2x pumps - 2x return flow mixing valves - 2x control panels / controllers - Return flow lift up to shut-off valve Iodpoy Rfa Rjfx Am Doat - Ash screw conveyors ❌ Not included: - Moving floor discharge - Ash container 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Crane loading directly via roof opening 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 – 10:00 - Transport and truck logistics to be organised by the buyer ⚠ The buyer's truck must be on site before crane works begin. Additional crane hours due to delayed truck arrival must be paid directly by the buyer on site. Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 Iajdpjvt Rwusfx Am Dst TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Year of construction: 2000, condition: good (used), Pressing force 28 t Iodpfxei Eld Us Am Deat X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11000 kg

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Iasdjwn Ebvjpfx Am Djt Bending length 3100 mm Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Machine weight approx. 8,000 kg Dimensions L-W-H 3450x2000x2800 mm

Year of construction: 2021, condition: used, Set of two containers. Sold as a set or individually. Internal reference : - #12431-1 -> SN° : 323808 Isdpfx Amey N Ec As Deat - #12431-2 -> SN° : 323809 Manufacturer : Thielmann Model : 31AW Type: 1000-litre container with agitator (removable) Year : 2021 Engine power: 1.5 kW – 1,500 rpm Heating and insulation between the outer shell and the tank Variable speed drive Material: 304 stainless steel Maximum pressure: 0.30 bar Weight : 320 kg Dimension : 120 x 110 x 200 cm Quantity available : 2

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Isdpfjvvkqgox Am Deat

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Iaodpfx Ajy H Dq Hjm Djt Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm Iaedpfx Amjwwl I Ij Dot total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). -Year of manufacture: 2024 Iaedpfx Amewvgbge Dot -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel -Automatic parts detection -Automatic abrasive flow control -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar Isdpfx Amsy Hki Aj Djat MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Iasdpfsr D Nmyex Am Djt

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 Ijdoy Hhqdopfx Am Djat MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Condition: excellent (used), Year of construction: 2003, GRASSAIR SFX 1000 screw compressor (ATLAS COPCO screw module) on a 500L tank after service Technical data: capacity 1.00 m3/min (1000 L/min); 7.5 KW engine; max. pressure 10 bar; Iasdpfx Ajwc Shxom Djt year 2003 compressor fully operational; net price: PLN 9,500 gross price: PLN 11,685

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Iaedoy Iam Hjpfx Am Dot Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: good (used), functionality: fully functional, working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved bed Working width: 240 mm, Working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6 – 36 m/min, Iasdpox Dzc Sofx Am Dot One powered roller in the table at the outfeed.

Condition: used, Scope of delivery see photos Iasdpfx Aovucgqsm Dot Technical data see PDF file *

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. Iaedpfx Asw Hc Spjm Dst The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Iaodpfx Amsy H Igfo Dst Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: good (used), functionality: fully functional, Punching force: 1000 kN Throat depth: 760 mm Stroke release via foot switch Iedpoy R Eh Iofx Am Deat

Condition: new, Year of construction: 2025, total width: 2,250 mm, total height: 1,800 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Automatic Pallet Nailing Machine for Wooden Pallets PT 1000 Plus – Polish Manufacturer. 100% brand new equipment. Iasdpfx Amsm E Np Us Dot The nailing machine utilizes CN coil nailers for nails in coils. Device description: The nailing machine consists of a single working table. The finished pallet is ejected on the opposite side of the machine, allowing for easy integration with the Forest PT 16 stacker. This configuration ensures full utilization of the device. Capable of nailing pallets with: • Deck with 5 boards + 3 bottom boards • Deck with 6 boards + 3 bottom boards • Deck with 7 boards + 3 bottom boards • Deck with 9 boards + 3 bottom boards • Pallets with stringers (runners) Possible pallet dimensions: max 1200x1200mm, min 600x600mm - Dimensions: length 3000cm, width 2400cm, height 1800cm - Quick adjustment for pallet size – height is automatically set; deck boards do not need to be perfectly uniform in thickness. - Simple operation with flexible nail placement and selectable nailing mode and quantity per joint - Standard configuration includes 8 nailers, with option to install up to 10 units.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t Ijdeyif Nljpfx Am Deat dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Iedpsxal Uwjfx Am Djat Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg.

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Iodpsygctrofx Am Deat Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany