Injection molding machine

Arburg 420C-1000-60-150 ( 123) 2-component

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Year of manufacture: 2012 Bsdpfx Akevnra Ho Hswl Power: 2 x 3200W Operating hours: 48412 hours Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN Bedpfx Akep Audqs Hewl SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg Bwjdpfxodqzbrj Ak Hel

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: Bwjdetk Hakspfx Ak Hol ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. Bodpfjiq Iy Ijx Ak Hswl They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: like new (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, machine/vehicle number: 196184, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, Equipment: documentation/manual, Used injection moulding machine – with 3 interchangeable injection units (25, 35, and 50 mm) Currently fitted with 50 mm unit Includes Geiger picker, integrated conveyor belt From ongoing German production, fully functional See document for download Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regularly serviced by manufacturer Clamping unit: Bwodpjvhb Iysfx Ak Hjl - Clamping force: 1,500 kN / 150 tons - Tie bar distance: 470 x 470 mm - Platen size: 650 x 650 mm - Ejector stroke: 175 mm - Opening stroke: 500 mm - Min. mould height: 250 mm - Max. daylight between platens: 750 mm Injection unit (50 mm): - Shot volume: 392 cm³ - Shot weight: 350 g - Screw diameter: 50 mm - Injection pressure: 1,670 bar Alternatively, 25 mm and 35 mm injection units included Extras: - Geiger picker - Handling interface - 2x air blow-offs - Accumulator for fast injection - 9 electric heating zones - 4 free cooling circuits - Optional equipment packages: Extended monitoring, enhanced motion controls, production management, process optimisation / operator aids, quality assurance, documentation - Electric conveyor belt - Sorting unit Documentation and software available in German (fully comprehensive) - Immediately available from our Hannover warehouse, loaded ex works or delivered (shipping at cost) - Function tested (guaranteed function up to first commissioning)

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Scrow 30 mm year 2003 Spars wide 42x42 Bsdpfx Ajpdr Dcek Hjwl Spray weight 97 g

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3379284, General Data Measurements width 1,650 mm Measurements depth 2,234 mm Measurements height 2,580mm Machine weight 3,600 kg Control System: Simens 840D solutionline Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 485 mm Workpiece Workpiece weight 400 kg Table Outer length 840 mm Bsdpfx Aoudy Hujk Howl Outer width 420 mm IPG Laser 100W

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, functionality: fully functional, machine/vehicle number: 184172, clamping force: 1,300 kN, Used injection moulding machine The machine has a complete service history, including all major repairs and component replacements—hoses, etc. Manufacturer: Arburg Model: 420C 1300-350 Year: 2001 Machine no.: 184172 Control: Selogica Operating hours: 56,380 h Continuous maintenance by the manufacturer Clamping Unit Clamping force: 1300 kN / 130 tons Tie bar distance: 420 x 420 mm Platen size: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Mould installation height: 250 mm Maximum platen distance: 750 mm Injection Unit Injection volume: 145 ccm Shot weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras - Hydraulic core pull - Robot interface - Dosing interface - Position-regulated screw Bwjdpfevimd Nsx Ak Hjl - Highly wear-resistant screw cylinder - CF card drive - Extended monitoring: movement monitoring, input monitoring, clamping program, production control, job change, optimisation, freely configurable page, production protocol, setup protocol - Immediately available in our warehouse in Hannover, loaded free onto truck or delivered free within Germany against reimbursement of freight cost - Function-tested (function guaranteed up to initial commissioning)

Condition: good (used), Year of construction: 2003, operating hours: 69,000 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an Arburg 570 C 2000 150/60 injection molding machine with three components. Bwedst Ug Uzjpfx Ak Hel The machine is fully functional and, after assembly, is ready for use. The third injection unit is not functional because the protective housing was removed for transport. It will be functional again after assembly. The third injection unit can be offered separately (stand-alone). Particularly noteworthy is the year of manufacture of the third unit: 2011 (see image). Technical specifications: Year of manufacture: 2003 Pump hours: 68,287 Cylinder: Ø 30 mm / SP150; Ø 18 mm SP 60 Length: 5,700 mm Weight: 5.7 t Equipment: Q-switch, conveyor belt, core pull, internal pressure Upon request, loading onto a truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website