Used H & K Abfülllinie Für Glasflaschen (Mehrweg) for sale (73,395)

Condition: new, maximum load weight: 27,976 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,150 mm, loading space width: 2,330 mm, loading space height: 2,290 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5627 Immediately available! Purchase, rental, or rent-to-own options according to agreement! Approx. 55m³ Stas steel tipper trailer for scrap / swing doors / alloy wheels / immediately available ---- * Manufacturer: Stas * Model: Ferrostar - Steel Tipper Trailer * First registration: - (new vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle lift axle / starting aid / disc brakes * Suspension: Air suspension with raise & lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy rims * Volume: approx. 55m³ (10.15m length x 2.33m width x 2.29m height) * Colour: Chassis RAL 9005, Body RAL 9005, Sliding cover SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking * Full surround rubber seal for swing door * 1x slide in the right-hand door * Tipper entry front left inside * Aluminium platform at the front with left-side access * Central clamping system for tarp securing * 2 roof bows (1 mid, 1 rear) * Aluminium sheet for tarp protection * Coupling height: 1.20m * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping * Load gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on the right * Single mudguards * Aluminium full-load landing legs as drop legs * Shovel and broom holder on the right * 1x toolbox on the left * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights * LED taillights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * "A" sign plate Immediately available! Purchase, rental, or rent-to-own options according to agreement! Notice regarding possible errors in the advertisement: Nlsdpfx Akjxpb Ufsfsa Despite careful preparation of this listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is subject to change without notice. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 8,500 kg, overall weight: 13,500 kg, axle configuration: 1 axle, first registration: 10/1983, loading space length: 9,900 mm, loading space width: 2,400 mm, loading space height: 2,900 mm, total width: 2,500 mm, total height: 3,900 mm, * Kässbohrer 1 axle box trailer for 4 horses or 3 carriages with living area & cupboards Nljdpfx Akexglfvofsa * 1 large flap at the back - 1 large flap on the side - 1 small entrance door at the front plus storage compartment * Approved as a semi-trailer for animals for sporting purposes - horse transporter - * Length of loading area: 9,900 mm - Total length: 10,520 mm * Width of loading area: 2,400 mm - Total width: 2,500 mm * Inside height: approx. 2,900 mm - Total height: 3,900 mm * Permissible total weight: 8,770 kg - Empty weight: 3,750 kg - Payload: 5,020 kg * Technically OK - trailer is tight and dry - something would also need to be done visually * German vehicle - German vehicle registration document - * Please make an appointment for a viewing * Contact person: Mr. Andreas Vogel * The information provided on the Internet is non-binding description. * They do not represent guaranteed properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors and prior sale

Condition: used, color: orange, empty load weight: 430 kg, machine/vehicle number: 3658, We offer here a salt spreader from Küpper Weisser (int. number 3658). Type IMSSE J18018H Serial number: 130266 Year of construction 2013 Unladen weight 430 kg Nledeiv U D Hjpfx Akfea The salt container holds approx. 1.8 m³, the spreading width and quantity can be conveniently adjusted on the control panel during operation. The spreader was mounted on a UNIMOG and used by us, but was carefully impregnated in our workshop before the winter service season, so that hardly any corrosion has occurred. It only has one minor defect, as the attachment of the spreading plate is broken and needs to be welded, which can be done in our workshop on collection. Otherwise, the machine is in good condition and can be used at short notice.

Condition: refurbished (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS extended version by 254 mm With 5KN 500N load cell fixture and WINdows 10-11 software for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H5kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - Speed range 0.001 to 1000 mm/min ( 2.5kN ) speed range 0.001 to 500 mm/min ( 5kN ) - high return speed 0.001 to 1500 mm/min. - Precise crosshead positioning - Robust load frame - Output protocol of the results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check Nodpfx Aeq Ruygekfola - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Single-spindle table model - maximum load 5kN in tension and compression - maximum travel 1004 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1394 mm width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, Year of construction: 2013, Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 cans per hour (568 ml) Container type: Aluminum cans Formats: 500 ml 568 ml Can dimensions: Diameter: 66.30 mm Height: 168 mm Lid specifications: Material: Aluminum Diameter: 59.44 mm Height: 2.07 mm Product: Beer Filling technology: Volumetric pressure filling with MID (magnetic inductive flow meters) Seaming technology: High-speed multi-head can seamer Pasteurization: Flash pasteurizer (KZE system) Condition: Very good condition, regularly maintained Availability: Q1 2026 Scope of Delivery Depalletizer | KHS | INNOPAL ASH-LD | Layer depalletizer with pallet lift; up to approx. 450 layers/h | 2013 Filler | KHS | INNOFIL DVD 92 | Volumetric pressure filler with MID technology; up to 48,000 cph | 2013 Seamer | Ferrum | F708G | High-speed can seamer with 8 stations; up to approx. 60,000 cph | 2013 Lid Feed System | NSM Magnettechnik | – | Automated lid feeding and distribution system | 2013 Flash Pasteurizer | KHS | INNOPRO KZE 250 | Continuous flash pasteurization with buffer tank | 2013 CIP System | KHS | INNOPRO CIP | Multi-tank CIP system (1,000 – 3,000 L) | 2013 Fill Height Inspector | KHS | Innocheck CUB | Fill level and closure inspection system | 2013 Printer | Leibinger | JET3up | Continuous inkjet printer for coding | 2013 Checkweigher | Radwag | DWT/RC 30 HP | Dynamic weight control system | 2013 Shrink Packer | KHS | INNOPACK SP A-M | Film shrink packer; pad + film capability | 2013 Pack Conveyor | KHS | INNOLINE GTR | Pack transport system | 2013 Can Conveyor | KHS | INNOLINE BTR | Can transport system | 2013 Pallet Conveyor | KHS | INNOLINE PTR | Pallet transport system | 2013 Pallet Warehouse | KHS | INNOLINE MPH 1-1 | Pallet buffer and storage system | 2013 Palletizer | KHS | INNOPAL PB1N1 | Automatic palletizing system | 2013 Pallet Wrapper | ROBOPAC | Genesis Futura 40 | Automatic ring wrapper; up to 95 pallets/h | 2020 Nsdsyyviuspfx Akfsla

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to Nlodpfx Akofgyifofoa up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Nledpefgyigsfx Akfea Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Year of construction: 2017, Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 40,000 b/h and is in a good condition.    Technical Data Capacity: 40,000 bph  Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KHS | Innocheck CUB | 2012 Blowing | Europool | – Packing machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle application | KHS | CSM 050-2 | 2012 Packing machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretcher | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR Nedpfx Aksyb R Srefela

Condition: new, Scope of delivery includes: 01x Base plate, second choice Material finish: galvanized Suitable for manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Total depth: approx. 140 mm Hole spacing (edge): approx. 38 mm Number of holes (plate): 03 pcs. Hole diameter (plate): approx. 13 mm Weight | per pc.: approx. 0.22 kg / pc. Nledpfxjyrr Tfe Akfsa Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. If transport or shipment of this item is required, additional costs will apply. These costs depend on the delivery location and the scope of delivery and can be provided upon request.

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, with sleeping cabin, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, rotating beacon, leaf suspension, tow hitch with air, light, and hydraulic connections, aluminum tank, aluminum rims, lashing eyes, under-run protection, swinging tailgates, roof hatch, space for crane installation behind cabin, green environmental badge. Wheelbase: 3900 mm Body: Meiller 3-way tipper body with aluminum drop-sides, pneumatic claw lock on tailgate, and space for crane assembly behind the cabin. 8t front axle, rear axle planetary gear set 300/13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, disc brakes on front and rear axles, condensate monitor for air system, electronic parking brake, front and rear stabilizers, residual heat utilization, construction site filter, additional thermal insulation, light and rain sensor, comfort central locking, high performance engine brake, Mercedes PowerShift 3, off-road drive program, PowerShift Advanced, multimedia cockpit, LED daytime running lights, PTO MB 131-2c pump, Meiller 7-piston pump type 270/63, comfort central locking, seat belt monitoring, PSM 2nd generation, Protection Package, pre-installation for toll recording, protective plate under tank, transmission oil cooling, lashing recesses in tipper floor, tipper floor 5 mm thick, aluminum sides, steel front wall. Nodpfxoxn Aukj Akfsla Loading height approx. 1480 mm! Space between cab and tipper body approx. 1000 mm! Upon request and for an extra charge of €15,000.00 to €40,000.00 (net), the vehicle is also available with crane (10-16 m/t)! New vehicle from stock with day registration on 24.11.2025! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, Altarfalztasche MBO 76 Nodpfxjh Ax I Se Akfela Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1986, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 79erYear 1985 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Njdpfx Ash Ax Aqekfsla Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1989, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 72erYear 1998 Nlsdpjh Ax A Uofx Akfoa Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 94erwith deflector Nlodpfx Ash Ax Rmokfea with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Nlsdpfxewz H Aho Akfsa

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Nljdpfx Aowq Sfgjkfja

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Nlodpfxewh U Avo Akfsa

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Nsdpfx Akjyb Sa Dsfjla

Condition: used, Year of construction: 2002, Overview This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) 60 rinsing nozzle 80 filling valves 15 capping heads Product: Water Container material: PET Neck format: Alaska Label type: OPP Capper brand: Zalkin Years of manufacture: 2002, 2009, 2013 Scope of delivery  Compressor: Atlas Copco ZD2300VSD (2009) Blowing machine: Krones Contiform S14 (2009) Air conveyor: Eurosistemi (2002) Filler: Krones Volumetic, Variojet (2002) Labeler: Krones Contiroll (2013) Nedpfowqpgzsx Akfsla

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Nedpfxsxhf Hij Akfsla

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Njdpowzvl Sjfx Akfsla

Condition: good (used), Motor: 2.2 kW Nledpfx Aoq U Rbqskfoa Extraction capacity: 1800 m3/h

Condition: good (used), refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: VEB, refrigeration compressor cooling unit complete -Type: K 1.6 H 200.2 / DK1.6H200.2-2.7 -Power: 290 W -Voltage: 220V rating pressure: 15.2 bar -Technical data: see photos type plate -Total dimensions: 480/300/H245 mm Nodpfoupbdajx Akfela -Weight: 22 kg

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR Nljdpfxsglaq Ie Akfsa The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: Z293-068, functionality: fully functional, pressing force: 407 t, table width: 1,500 mm, table length: 2,500 mm, overall weight: 32,000 kg, control type: CNC control, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Nedpfsxm R S Iox Akfola Table width: 1,500 mm Table length: 2,500 mm Hydraulic pressure: 320 bar Nominal force: 2 x 2,000 kN MACHINE DETAILS Electrical specifications Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Connection: 42 kW Rated current: 100 A Dimensions & Weight Dimensions: 5,000 x 4,000 x 3,800 mm Weight: 32,000 kg EQUIPMENT CNC control Cooling unit Filter extraction HILMA console throat (1,600 mm)