Used Haco Pht 2000T for sale (177)

Condition: ready for operation (used), Fanuc A06B-0247-B805 servo motor SN C05YA3070 + A860-2000-T301, used, good condition, 100% functional, scope of delivery as per photos Hnsdpfxsq E Dqre Ab Iot

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Hodem Nb Riepfx Ab Iont >max. piece length 340 mm

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below Hnedpjv E R E Njfx Ab Iet - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2015, ©farmpartner-tec GmbH_____We are selling a used Bucher Gmeiner STA 2000 TC spreader, manufactured in 2015. Includes control panel, support legs, and a short shaft (suitable for Lindner, Multicar, etc.). 2 m³ filling capacity, 2 auger spreaders. Further details are available upon request. Location: 93095 Hagelstadt. Hjdpfx Abeyq Avbs Ijnt

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Hodpfxeqqivvo Ab Ient Height of the machine 2600 mm Technical data Errors excepted

Condition: used, functionality: fully functional, machine/vehicle number: 2188, empty load weight: 6,323 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, wheelbase: 1,310 mm, color: yellow, Year of construction: 2019, Equipment: ABS, Schmitz Mega semi-trailer with liftable roof, Code XL, Edscha, portal doors, side mounting rail, aluminum rims, German vehicle from first owner. For sale to commercial businesses only, with exclusion of all warranties. Hnsdpszb Hqwofx Ab Iet We deliver to any German seaport.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 12,893 h, load capacity: 2,000 kg, lifting height: 4,100 mm, mast type: triplex, construction height: 2,150 mm, battery capacity: 700 Ah, battery voltage: 48 V, fork length: 1,600 mm, color: red, Equipment: cabin, head guard, lighting, sideshift, trailer coupling, Linde E20PH 2t triplex 4-wheel electric forklift, built in 2016, with a load capacity of 2000kg. The mast is a triplex mast with full free lift and a lift height of 4600mm. It features a Durwen sideshift with fork positioner. The hydraulics are leak-proof, and the service has been completed! All work was performed by a specialist dealer! Battery serviced. The battery was tested by a specialist using the C5 procedure. Technical specifications: Manufacturer: Linde Model: E20PH Year of manufacture: 2016 Load capacity: 2000 kg Hours: 12,893 Overall height: 2,150 mm Fork length: 1,600 mm (shorter available upon request) Lift height: 4,600 mm Mast: Triplex with full free lift Cabin: Canopy 48 V 700 Ah battery from 2020 with 70% remaining capacity Grammer seat with seat heating 12 V 120 W connection for terminal/power supply Light-colored, non-marking tires in very good condition ZH 1 + 2 (auxiliary hydraulics 1 + 2) Fork positioner with sideshift from Durwen installed. Charger included. Work lights front and rear Bluespot rear Rotating beacon Forklift in very good condition, UVV inspection available upon request. Hnjdpfxewp R Uws Ab Ist Transport possible VAT deductible Net export possible with either a valid VAT number within the EU or when exporting to a third country.

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. Hjdpfxsvcyw Ae Ab Ient position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min.

Condition: new, A mobile workstation with fast,individual height adjustment. About onePedal is operated the hydraulic unit,this is a stepless adaptation to thedesired working height the base frame can be differentWorktops are placed. Theseare fixed with 4 socket lift table has a steel worktop and willdelivered with 4 swivel castors, 2 of them are withParking hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 970 x 590 mmTotal height: 1010 mmWeight: 135 kgRahmen: 970 x 590 mmGes. height: 1010 mmweight: 85 kg Hnodpfovwf Rqox Ab Ijt

Condition: new, The lifting table for larger xibility as it should be, your desired oneCountertop on the one you wantWorking lift table can be with the one you wantBe equipped and through the plateFoot pedal can be adjusted to your desired height.4 sturdy Polyamit castors, two of them withParking brake, ensure ideal handling.A safeguard against slipping the tablegives you the necessary sense of hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 1200 x 740 mmTotal height: 1010 mmWeight: 150 kg Hodpsvxa Nqsfx Ab Ijnt

Condition: new, You need a large mobile workbenchyou to the appropriate working heightwant to adjust? Then ours is greatLifting table Zeus the right ply populate the table with theYou desired worktop, whetherPerforated plate for clamping a variety ofWorker or a solid beechMultiplex plate. The sideways foot pedalgives you the opportunity to set the table fastto adjust to your desired hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 1900 x 740 mmTotal height: 1010 mmWeight: 215 kg Hnedpfx Asvxa Nweb Ist

Condition: used, functionality: fully functional, machine/vehicle number: 2132, empty load weight: 6,513 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 09/2026, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, tire size: 445/45/19.5, tire condition: 50 %, wheelbase: 1,310 mm, color: blue, Year of construction: 2019, Equipment: ABS, Schmitz Mega trailer with lifting roof, galvanized chassis, Code XL, Edscha sliding roof, portal doors, side perforated strip, 3 storage boxes, German vehicle from first owner. Sale only to commercial customers and under exclusion of any warranty. We deliver to any German seaport. Hnsdpfx Ajy Ev Ihjb Ist

Condition: used, functionality: fully functional, machine/vehicle number: 2132, empty load weight: 6,178 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 11/2025, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, wheelbase: 1,310 mm, color: white, Year of construction: 2014, Equipment: ABS, Schmitz mega trailer with lifting roof, Code XL, Edscha, 1 lift axle, portal doors, side perforated lashing rail, German vehicle from first owner. Hnedpfjw Tik Rsx Ab Iot Sale only to commercial traders and under exclusion of any warranty. We deliver to any German seaport.

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 Hedpfx Abet Run Ie Ijnt load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Year of construction: 2019, condition: used, Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands) We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands. This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use. With 1/2 Gastro tooling; 325 x 265 (2x) ----- Key Features - High-capacity automatic traysealer for MAP and vacuum packaging - Equipped with integrated Busch vacuum pump (160 m³/h) - Dual mould system – seal two trays simultaneously for high throughput - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.) - Quick and easy mould change system - Transparent cover for excellent accessibility and cleaning - Flexible operation with programmable tray formats - Designed for continuous industrial production ----- Technical Specifications Hnjdpfx Asy Nagijb Iot - Machine dimensions: 4750 x 1180 x 1550 mm - Vacuum pump: 160 m³/h Busch - Cycle time: 10–15 seconds - Power supply: 400V / 3-phase / 50 Hz - Power consumption: ±10 kW - Air requirement: 6 bar (max. 400 l/min) - Weight: ±1100 kg - Max tray size: 2 × 350 x 260 mm - Max tray depth: up to 120 mm ----- Why This Machine? The TPS 2000 is built for efficient, high-volume packaging with maximum flexibility. Thanks to its dual mould system, it can double production capacity or run different tray formats simultaneously. ----- Availability - Location: Emmeloord, The Netherlands - Status: In stock – immediately available - Condition: Very neat, directly from production ----- Interested? For pricing, additional photos, or a video of the machine in operation, feel free to contact us.

Condition: good (used), Year of construction: 2010, Sepamatic 2000 T Separator SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000 T Year: 2010 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Hsdeyhmk Djpfx Ab Isnt Machine Dimensions LxWxH: 1.300x1.300x1.700 mm Machine Weight: 1.400 kg.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Hsdpfxjxxb Rrj Ab Ijnt Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws Hsdozr Rqnjpfx Ab Isnt - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter Hsdpfxjwugczo Ab Iont 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Hnsdpfx Absycc N Se Iet Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: good (used), Year of construction: 2018, spindle bore: 140 mm, turning diameter over bed slide: 1,100 mm, center width: 4,000 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 4 rpm, overall weight: 14,500 kg, Turning lathe, manufacturer: FAT HACO, type: TUR SMN 1100 x 4000 Year of manufacture: 2018, serial number: 180529, control system: SIEMENS 840 D SL, distance between centers: 4,000 mm, swing diameter over bed: 1,100 mm, swing diameter over cross slide: 790 mm, max. workpiece weight between centers: 4,000 kg, spindle speed: 4 to 1,200 rpm, spindle bore: 140 mm, drive power: 33 kW, machine weight: 14,500 kg. The standard equipment of the machine includes an 8-position VDI turret, a hydraulic steady rest, an automatic gear change, a coolant system, a hydraulic unit, an automatic lubrication system, work area lighting, a USB port, and CE-compliant design. Hnsdpfezvwmqjx Ab Ist

Condition: new, More technical data on request                    Vertrauen Sie auf das Maschinenservice von KK-Industries GmbH                 Die Lebensdauer einer Maschine hängt entscheidend von  Wartung und Pflege ab. Nur wenn Maschinen ordentlich gewartet werden,  lassen sich diese auch jahrelang weitgehend uneingeschränkt nutzen.  KK-Industries hat deswegen für Sie einen optimierten Maschinenservice  ins Leben gerufen, von dem Sie als unser Kunde profitieren. Unser  Service-Team, das für Sie den Maschinenservice stemmt, setzt sich aus  hochqualifizierten Experten zusammen, die ausgesprochen professionell  arbeiten. Für uns ist es eine Selbstverständlichkeit, dass Sie bei uns  ausschließlich Maschinen erhalten, die qualitativ absolut hochwertig  sind. Ergänzt wird dies durch unseren exzellenten Service, der von  Anfang durch seine Kundenorientierung auffällt. Leistungen unseres Kundendienstes im Überblick Mit  unserem Maschinenservice bietet Ihnen unser Kundendienst ein gelungenes  Angebot verschiedener Leistungen, das Sie flexibel in Anspruch nehmen  können. Wir führen für Sie Inbetriebnahmen und Ersatzbestellungen durch.  Darüber hinaus bieten wir unter dem Dach von unserem Maschinenservice  Einschulungen, Servicearbeiten und Instandsetzungen an. Auch  Sicherheitsprüfungen werden durch unsere Fachkräfte durchgeführt.  Verlassen Sie sich bei unserem Maschinenservice darauf, dass wir nur mit  gut ausgebildeten Servicetechnikern arbeiten. Sie können in der Branche  auf jahrelange Erfahrung verweisen. Maschinenservice   für: Blechbearbeitungsmaschinen Abkantpressen, Tafelscheren,  Laser ..   Accurl, Adira, Amada, Atlantic, Baykal, Boschert, Bystronic Beyeler,  Dener, Durma, Durmazlar, Ermaksan, Farina, Gasparini, Gecko, Haco, MVD,  HMP, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Warcom... Sichern Sie sich langfristigen Erfolg Unsere  ausgebildeten Servicetechniker garantieren Ihnen bei unserem  Maschinenservice ein hohes Niveau. Wir bauen auf einen guten Service,  hohe Qualität und Flexibilität. Mit dieser können wir uns an Ihren  Wünschen orientieren. Uns ist es wichtig, dass Sie mit unserem  Maschinenservice absolut zufrieden sind. Dabei liegt es uns am Herzen,  dass Sie sich für eine langfristige Partnerschaft mit dem Team von  KK-Industries entscheiden. Damit ihre Kosten überschaubar bleiben, haben  wir unseren Maschinenservice für Sie besonders günstig gestaltet. Unser  Maschinenservice ist die perfekte Ergänzung zu unserem  Maschinenangebot. Vertrauen Sie auf unsere Erfahrung und setzen Sie auf  Servicemitarbeiter, die ihrer Aufgabe mit Leidenschaft nachgehen. Siehe unseren Monteuranforderungsschein: Ich hoffe auf eine gute Zusammenarbeit Mit freundlichen Grüßen KK-Industries GmbH Klaus Kletzer     Hsdpfx Aed N Swpsb Isnt Abkantpresse  Tafelschere Schweißtisch Laserschneidanlage Hydraulikpresse  Werkstättenpresse Gebrauchtmaschine Blecheinrollmaschine Bandsäge  Ausklinkmaschine Bohrmaschine Exzenterpresse Profilstahlschere  Stanzmaschine Nibbelmaschine Schwenkbiegemaschine Kreissäge  Rohrbiegemaschine Langabkantmaschine Winkelbieger Bördelmaschine  Drehmaschine Breitbandschleifmaschine Schleifmaschine Falzformer  Fräsmaschine Spaltanlage Längs- und Querteilanlage Entgratungsm

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 4,07,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: Hnjdpoyvh Arefx Ab Iet 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Hsdpjcxu Uxofx Ab Isnt Folding bench ZGR-2000T/0.8 incl. transport rollers Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm plus 350 euros Manual folding machine 75 euros Price: 1350 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Hnodpfxec Rtv Ts Ab Ist Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.